1996 ================================================================================ UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K (Mark one) (X) ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 [FEE REQUIRED] FOR THE FISCAL YEAR ENDED SEPTEMBER 30, 1996 OR ( ) TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 [NO FEE REQUIRED] For the transition period from _________________ to ___________________ Commission File Number 1-7463 JACOBS ENGINEERING GROUP INC. (EXACT NAME OF REGISTRANT AS SPECIFIED IN ITS CHARTER) DELAWARE 95-4081636 (STATE OF INCORPORATION) (I.R.S. EMPLOYER IDENTIFICATION NUMBER) 251 SOUTH LAKE AVENUE, PASADENA, CALIFORNIA 91101 (ADDRESS OF PRINCIPAL EXECUTIVE OFFICES) (ZIP CODE) Registrant's telephone number, including area code (818) 449-2171 Securities registered pursuant to Section 12(b) of the Act: NAME OF EACH EXCHANGE TITLE OF EACH CLASS ON WHICH REGISTERED -------------------------- ----------------------- Common Stock, $1 par value New York Stock Exchange INDICATE BY CHECK-MARK WHETHER THE REGISTRANT (1) HAS FILED ALL REPORTS REQUIRED TO BE FILED BY SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 DURING THE PRECEDING 12 MONTHS (OR FOR SUCH SHORTER PERIOD THAT THE REGISTRANT WAS REQUIRED TO FILE SUCH REPORTS), AND (2) HAS BEEN SUBJECT TO SUCH FILING REQUIREMENTS FOR THE PAST 90 DAYS. ( X ) YES ( ) NO INDICATE BY CHECK-MARK IF DISCLOSURE OF DELINQUENT FILERS PURSUANT TO ITEM 405 OF REGULATION S-K IS NOT CONTAINED HEREIN, AND WILL NOT BE CONTAINED, TO THE BEST OF THE REGISTRANT'S KNOWLEDGE, IN DEFINITIVE PROXY OR INFORMATION STATEMENTS INCORPORATED BY REFERENCE IN PART III OF FORM 10-K OR ANY AMENDMENT TO THIS FORM 10-K. ( ) ___________________ The aggregate market value of the Registrant's voting stock held by non- affiliates was approximately $502,823,700 as of December 26, 1996, based upon the last reported sales price on the New York Stock Exchange. For this purpose, the Registrant considers Dr. Joseph J. Jacobs to be its only affiliate. As of December 26, 1996, the Registrant had outstanding 25,679,827 shares of its common stock. DOCUMENTS INCORPORATED BY REFERENCE Part II: Annual Report for the fiscal year ended September 30, 1996, only portions of which are incorporated by reference. Part III: Proxy Statement for the Annual Meeting of Shareholders to be filed with the Securities and Exchange Commission within 120 days after the close of the Registrant's fiscal year, only portions of which are incorporated by reference. ================================================================================
PART I ITEM 1. BUSINESS GENERAL - ------- Jacobs Engineering Group Inc. (the "Company") is one of the largest professional service firms in the United States providing engineering, design and consulting services; construction and construction management services; and process plant maintenance services to a broad range of industrial, commercial and governmental clients. The Company provides its services through offices and subsidiaries located throughout the United States, the United Kingdom and Ireland, as well as through affiliated entities located throughout Europe and India. The Company focuses its services on selected industry groups and markets including chemicals; petroleum refining; semiconductor; pulp and paper; pharmaceuticals and biotechnology; federal programs; and buildings and infrastructure (this last group includes transportation and health care projects, commercial and governmental buildings, and other industrial projects). In July 1994, the Company acquired all of the engineering and construction management services businesses of CRSS Inc. The Company acquired substantially all of the assets, subject to certain assumed liabilities, of CRS Sirrine Engineers, Inc., and all of the issued and outstanding equity securities of CRSS Constructors, Inc. and CRSS International, Inc. Together, these businesses provide comprehensive design, engineering and construction management services to government and commercial clients in the pulp and paper, semiconductor, and buildings and infrastructure markets, among others, primarily within the continental United States. In January 1996, the Company completed the purchase of a 49% equity interest in the Serete Group. Headquartered in France, the Serete Group provides engineering, design, construction and construction management services to commercial and governmental clients located throughout Europe. The purchase price totaled $19.0 million, and the purchase agreement provides for the Company to increase its ownership interest if the Serete Group achieves certain operating goals over the two years immediately following the initial investment. The Company accounts for its investment in the Serete Group using the equity method. The Company is a Delaware corporation and was originally incorporated in 1957 as a successor to a business organized by Dr. Joseph J. Jacobs in 1947. The Company's common stock has been publicly held since 1970 and is currently listed on the New York Stock Exchange. SERVICES PROVIDED - ----------------- The Company offers three broad categories of professional services: engineering (which includes design, consulting and other related services); construction and construction management; and plant maintenance. The Company will often establish a relationship with a client where it is awarded a contract for the initial phases of an engineering and/or construction project. These services may include feasibility studies, consulting or design work. Because of the range of technical expertise the Company possesses, it is often retained for additional work as the project develops. The scope of services provided by the Company, therefore, ranges from consulting to complete single-responsibility contracts. Page 1
The following table sets forth the total revenues of the Company from each of its three basic service categories for each of the five years ended September 30, 1996 (in thousands of dollars): <TABLE> <CAPTION> 1992 1993 1994 1995 1996 ---------- ---------- ---------- ---------- ---------- <S> <C> <C> <C> <C> <C> Engineering Services $ 355,483 $ 453,247 $ 476,491 $ 588,399 $ 627,622 Field Services: Construction 503,406 424,259 456,750 881,574 925,681 Maintenance 247,538 265,420 232,513 253,084 245,667 ---------- ---------- ---------- ---------- ---------- $1,106,427 $1,142,926 $1,165,754 $1,723,057 $1,798,970 ========== ========== ========== ========== ========== </TABLE> Engineering ----------- The Company employs all of the engineering and related disciplines to engineer and design modern process plants (including projects for clients in the chemicals, pharmaceuticals and biotechnology, refining, food, and minerals and fertilizers industries), semiconductor facilities, pulp and paper plants, and other facilities (such as high technology manufacturing operations and other specialized plants). With respect to the environmental area of the Company's business (see "Industry Groups and Markets - Federal Programs", below), the Company employs all of the requisite engineering, scientific, public health and related skills to consult, investigate, study, manage and provide remedial engineering for major environmental programs. The Company's capabilities in process engineering and construction combined with its environmental expertise allow it to offer its clients a wide range of services as a single-source provider. Accordingly, the Company has been awarded contracts requiring a combination of traditional process engineering and environmental services. The Company also employs all of the professional and technical expertise necessary to provide a broad range of consulting services including: performing pricing studies, market analyses and financial projections necessary in determining the feasibility of a project; performing gasoline reformulation modeling; analyzing and evaluating layout and mechanical designs for complex processing plants; analyzing automation and control systems; analyzing, designing and executing biocontainment strategies; developing and performing process protocols in respect of Federal Drug Administration mandated qualification/validation requirements; and performing geological and metallurgical studies. Also included in the category of "Engineering" are all of the related support services necessary for the proper and effective delivery of the Company's engineering and related services. Among these are cost engineering, planning, scheduling, procurement, estimating, project accounting, quality and safety. Construction ------------ The Company provides traditional field construction as well as construction management services to private and public sector clients in virtually all of the industries to which it provides engineering services. The Company can also provide its clients with Advanced Construction Technology ("ACT")(R). ACT is an advanced form of off-site engineering, design, fabrication and assembly, and field erection. ACT provides clients with an alternative approach to traditional methods of engineering and construction which can significantly reduce new plant costs. In the environmental area, recent contract awards from clients in the public sector require the Company to provide environmental remedial construction services. The Company's field construction activities are focused primarily on those construction projects for which the Company has performed the engineering and design work. By focusing its construction efforts on such projects, the Company avoids the risk of constructing complex plants based on designs prepared by others. The financial risk to the Company of constructing complex plants based on designs prepared by third parties may be particularly significant on fixed- price contracts. The Company actively markets all of its services to clients on projects where the scope of services required is within the Company's fields of expertise. The Company believes that by integrating and bundling its services (i.e., providing design, engineering and construction services on the same Page 2
project) it can price its services more competitively and can enhance the overall contract profitability. The Company also believes that clients benefit from such an approach because they can look to the Company as a single-source provider of design/build services. However, the Company will continue to pursue construction-only projects where it can negotiate pricing and other contract terms acceptable to the Company. In the area of construction management, the Company can provide a wide range of services to its clients. The Company may act as the program director, whereby it oversees, on behalf of the owner of the project, the complete planning, design and construction phases of the project. Or, its services may be limited to providing construction consulting, estimating, scheduling or value engineering services. Maintenance ----------- Maintenance generally refers to all of the tasks required to keep a plant in day-to-day operations, including the repair and replacement of pumps, piping, heat exchangers and other equipment. It also includes "turnaround" work which involves major refurbishment which can only be performed when the plant is shut down. Since shutdowns are expensive to the owners of the plant, turnaround work will often require maximizing the number of skilled craft personnel that can work efficiently on a project on a 24 hours per day, seven days per week basis. The Company employs sophisticated computer scheduling and programming to complete turnaround projects quickly and it maintains contact with a large pool of skilled craftsmen it can hire as needed on maintenance and turnaround projects. Although the profit margins that can be realized from maintenance services are generally lower than those associated with the other services the Company provides, the costs to support maintenance activities are also generally lower than those associated with the Company's other services. Furthermore, since maintenance contracts are normally cost-reimbursable in nature, they present less risk to the Company. Additionally, although engineering and construction projects may be of a short-term nature, maintenance services often result in long-term relationships with clients. For example, the Company has been providing maintenance services at several major process plants for over 30 years. This aspect of maintenance services greatly reduces the selling costs in respect of such services. INDUSTRY GROUPS AND MARKETS - --------------------------- The Company has chosen to focus its efforts on the following industry groups and markets: chemicals; petroleum refining; semiconductor; buildings and infrastructure; pulp and paper; pharmaceuticals and biotechnology; and U.S. federal programs. The Company believes these industry groups and markets have sufficient common needs to permit cross-utilization of the Company's resources which help to mitigate the negative effects of a downturn in a single industry. The following table sets forth the total revenues of the Company from each of these industry groups and markets for each of the five years ended September 30, 1996 (in thousands of dollars): <TABLE> <CAPTION> 1992 1993 1994 1995 1996 ---------- ---------- ---------- ---------- ---------- <S> <C> <C> <C> <C> <C> Chemicals $ 321,991 $ 306,296 $ 315,991 $ 377,731 $ 452,448 Refining 362,005 404,462 372,769 480,472 417,739 Semiconductor 120,022 70,249 83,477 264,492 268,520 Buildings and Infrastructure 104,799 87,946 88,228 174,183 189,834 Pulp and Paper - - 7,258 85,476 170,553 Pharmaceuticals and Biotechnology 29,346 80,248 97,301 123,683 147,840 Federal Programs 105,608 161,964 175,846 175,200 145,275 Other 62,656 31,761 24,884 41,820 6,761 ---------- ---------- ---------- ---------- ---------- $1,106,427 $1,142,926 $1,165,754 $1,723,057 $1,798,970 ========== ========== ========== ========== ========== </TABLE> In the area of federal programs, the Company historically has provided primarily environmental restoration, engineering and consulting services. However, several of the more recent contracts awarded Page 3
to the Company are for engineering, construction and project management services for the remediation of sites contaminated with hazardous wastes. Maintenance services are provided primarily to the chemicals and refining industries. Chemicals --------- The Company has always considered the chemicals industry a cornerstone of its business. Revenues from this industry group have consistently accounted for a significant share of each year's total revenues. Historically, whenever the Company has sought to expand its business, the impact of such expansion on the Company's chemicals business has always been an important consideration. The Company's first office outside the United States was opened in support of a bulk-chemical project for a large, U.S. company seeking to expand its operations internationally. In 1993, when the Company sought to expand its international operations, it acquired H&G Process Contracting Limited ("Humphreys & Glasgow"), based in England. Humphreys & Glasgow is an engineering and construction business with broad-based process engineering and design skills, and a large client base in the chemicals, pharmaceuticals and refining industries. And as discussed above, in January 1996, the Company completed its purchase of a 49% equity interest in the Serete Group (headquartered in France). The Serete Group possesses strong engineering skills, and services a large number of clients in the chemicals industries, among others. Currently, the Company furnishes its full line of services to its clients operating in the chemicals industries. The Company has provided technical, financial, marketing and management consulting services to many of the largest chemical manufacturers in the world. The Company can perform feasibility studies, as well as preliminary and detailed design and engineering services, construction, and construction management services to its clients in this industry. Typical projects range from high-pressure polymer processes for the production of bulk chemicals, to low-pressure, multi-product processes for the production of fine and specialty chemicals. The Company has also completed projects dealing with the modernization and upgrading of polyethelene and liquid polymer production facilities. The Company has extensive knowledge of, and experience with, advance polymer technologies, as well as many specialty chemicals. Over the years, the Company has continued to grow the chemicals business through acquisitions and internal initiatives. As discussed above, the Company acquired Humphreys & Glasgow in 1993. Since then, the Company has expanded its involvement with U.S.-based companies doing business in the U.K., as well as expanding its European client base. Refining -------- The Company provides its full line of services to its clients in the petroleum refining industry. Typical projects in the refining area include retrofits, revamps or expansions of existing plants, upgrading individual process units within refineries, new construction and maintenance services. The Company also provides a broad range of consulting services to its clients, including feasibility and multi-client studies. Over the past several years, many of the Company's contract awards in the refining area have been for plants producing oxygenates and other high-octane fuel blending components for gasoline (such components are required by the Clean Air Act of 1990 in reformulated gasolines in order to reduce the emissions of unburned hydrocarbons and carbon monoxide from automobiles), as well as plants that hydrotreat various fuel fractions to reduce the sulfur content of blended products. The Company has completed several major projects to design, engineer, procure and construct methyl tertiary butyl ether ("MTBE") units and tertiary amyl butyl ether ("TAME") units for a number of major refiners at facilities located throughout the United States. The Company has also utilized its off- site construction capabilities in the construction and installation of these units. The use of off-site construction can help decongest the construction site and allow for parallel construction to proceed simultaneously with the modular activity. A significant aspect of the Company's service to this industry is in the area of contract maintenance. The Company has contracts with several major oil refiners for on-site maintenance and Page 4
turnaround activities. Many of these contracts are evergreen in nature and tend to be extended over many years. Another important aspect of this industry group has been the development of performance-based partnering relationships with clients. Over the past several years, the Company has entered into evergreen engineering services contracts with several clients. Such agreements have been both site-specific and national in scope. Often, these alliances provide the Company with opportunities to expand its services to include fully-integrated engineering, procurement, construction and construction management services. The Company has broadened this area of its business through internal growth and acquisitions. One acquisition completed in 1993 expanded the Company's geographic presence to include the West Coast refining market; the acquisition also added to its client base. Semiconductor ------------- The Company provides engineering, procurement, construction, and construction management services to its clients in the semiconductor industry. Typical projects in this industry include multi-million dollar state-of-the-art wafer fabrication and crystal growing facilities used to produce microprocessors for computers and other consumer electronic devices. Generally, projects in the semiconductor industry are more complex than other facilities projects and have greater emphasis on cleanroom, and similar high-end technologies. Buildings and Infrastructure ---------------------------- Buildings and infrastructure refers to those contracts requiring the Company to provide comprehensive architectural, engineering, design, construction and/or construction management services for projects such as high technology manufacturing operations, specialized plants for clients in the food industry, and research and development facilities that require technically complex structures. It also includes programming, design, program management and construction management services for public, institutional and corporate clients. Typical projects include civic centers, correctional facilities, health care facilities and transportation systems, as well as multi-purpose buildings for industrial, commercial and government clients. Pulp and Paper -------------- The Company provides a broad range of engineering and construction services to its clients in the pulp and paper industry. Additionally, the Company provides strategic planning and conceptual studies for many of its clients, as well as environmental services relating to compliance with EPA emission standards. Typical projects in the pulp and paper area range from small mill projects to complex, multi-million dollar paper machine rebuilds, mill expansions and construction of new facilities. Such projects encompass all areas of a mill, including woodyards, pulping and bleaching, papermaking, chemical recovery, material handling and power and steam generation. In the area of papermaking, the Company's expertise includes tissue and towel, coated and uncoated fine papers, newsprint and linerboard. The Company's expertise also includes the converting and packaging of paper products for consumer use. The Company has been instrumental in the design and installation of state-of- the-art facilities for recycle fiber, deinking and pulp bleaching. Chemical recovery and power generation are an integral part of the papermaking process. The Company has broad experience in these areas and has applied its expertise in the engineering and construction of such facilities for the pulp and paper industry. As with clients in the petroleum refining industry, the Company has established formal partnering arrangements with certain clients in the pulp and paper industry. Such arrangements provide for the delivery of on-site engineering services, and often expand to include procurement, construction and construction management services. Page 5
Pharmaceuticals and Biotechnology --------------------------------- The Company furnishes its full line of services to its clients operating in the pharmaceuticals and biotechnology industries. The scope of services the Company can provide its clients in these markets include feasibility studies, preliminary and detailed design and engineering services, construction, and construction management services. The Company can also provide conceptual design services with emphasis on production strategy, current good manufacturing practices ("cGMP") compliance, regulatory compliance and qualification/validation services for pharmaceutical and biotechnology research, development and production facilities. Accordingly, the Company is fully capable of executing multi-million dollar, single-responsibility projects in the areas of pharmaceuticals and biotechnology. Typical projects for clients in this industry include sterile fill, pharmaceutical manufacturing facilities, state-of-the-art biotechnology laboratories and pilot plants, and design services for technologically-advanced barrier micro-environment systems. Many projects in this industry group require facilities with highly complex environmental controls and advanced automation systems for manufacturing and distribution management. Over the past several years, the Company has expanded this area of its business through acquisitions and internal growth. Federal Programs ---------------- Most of the Company's Federal Programs revenues are derived from environmental projects. The Company believes it is one of the leading providers in the United States of environmental restoration, engineering and consulting services, including hazardous waste management and site cleanup and closure. Although this business continues to represent an important area of the Company's overall operations, revenues have declined over the past two years. The decline in revenues occurred in large part due to reduced funding levels for government projects, combined with an overall decline in governmental regulatory and enforcement actions. Currently, there are numerous proposals being offered for consideration to overhaul the U.S. federal regulatory process, the ultimate outcome of which cannot yet be determined. Nevertheless, the Company believes that the U.S. Department of Energy ("DOE") and Department of Defense ("DOD") will continue to devote increasingly more of their resources to site remediation and cleanup. The Company experienced an increase in activity in this area of its business during the latter part of fiscal 1996, and believes that demand for environmental services will continue to grow in the future. Many of the projects for the U.S. government span several years. For larger programs, the scope of services is such that the Company sometimes teams with other companies in order to execute the project. The Company is currently providing environmental restoration, engineering, construction and site operations and maintenance services for a number of U.S. federal government agencies including the DOE, DOD, and the U.S. Environmental Protection Agency. Typical projects for U.S. government agencies include the preparation of feasibility studies and performance of remedial investigations, engineering, design and remediation services on several national programs. Many of the Company's contracts relate to the Comprehensive Environmental Response Compensation and Liability Act of 1980 ("CERCLA" or "Superfund") and the related Superfund Amendments and Reauthorization Act of 1986 ("SARA"), as reauthorized in 1990. More recently, the Company has been awarded multi-year contracts from the U.S. Air Force to provide full-service remedial action services for the U.S. Air Force Center for Environmental Excellence ("AFCEE") at several bases located in the U.S., as well as a "nationwide" award to provide services under the U.S. Base Realignment and Closure ("BRAC") program. And in 1995, the Company was awarded the Alaska TERC (Total Environmental Restoration Contract). The Alaska TERC is a multi-year program to provide engineering and site cleanup services throughout that state. The Company also provides project management services over site cleanup activities at various government installations, as well as detailed scientific and support services, groundwater restoration management and action plans, and services relating to the decommissioning of nuclear weapons production and other defense facilities. Page 6
BACKLOG - ------- For information regarding the Company's backlog, reference should be made to Item 7. - Management's Discussion and Analysis of Financial Condition and Results of Operations, incorporated by reference in this report. CUSTOMERS - --------- For the years ended September 30, 1992, 1993, 1994, 1995 and 1996, revenues from agencies of the U.S. federal government accounted for 9.4%, 14.1%, 15.4%, 11.4% and 8.7%, respectively, of total revenues. Due to the amount of pass-through costs (see "Contracts" below) that may be incurred on construction and maintenance projects, it is not unusual for a client in the private sector to account for more than 10% of revenues in any given year. For the year ended September 30, 1992, two clients in the private sector accounted for 12.5% and 10.8%, respectively, of total revenues. A different client accounted for 11.6% and 13.1% of total revenues in 1994 and 1995, respectively. No single client in the private sector accounted for 10% or more of total revenues in 1993 or 1996. FOREIGN OPERATIONS - ------------------ For the years ended September 30, 1992, 1993, 1994, 1995 and 1996, revenues from projects outside of North America were approximately 16.3%, 10.8%, 5.6%, 5.4% and 10.3%, respectively, of total revenues. For the year ended September 30, 1992, substantially all such revenues related to the Company's offices in Ireland. Beginning with the year ended September 30, 1993, such revenues relate primarily to the Company's offices in the U.K. and Ireland. As discussed above, during fiscal 1996, the Company acquired a 49% equity interest in the Serete Group (headquartered in France). The Serete Group has operations throughout Europe, and executes projects for commercial clients in the chemicals, pharmaceuticals and semiconductor industries, as well as buildings and infrastructure projects for both commercial and governmental clients. The Company also has operations in India through its 40% interest in an engineering and design firm specializing in projects for clients in the chemical, pharmaceuticals and petroleum refining markets. The Company has executed contracts jointly with the Indian company, and expects to expand this activity in the future. The Company accounts for the Indian company using the equity method. CONTRACTS - --------- While there is considerable variation in the pricing provisions of the contracts undertaken by the Company, they can generally be grouped into three broad categories: Cost-reimbursable; guaranteed maximum price and fixed-price. The following table sets forth the percentages of total revenues represented by these types of contracts during each of the five years ended September 30, 1996: <TABLE> <CAPTION> 1992 1993 1994 1995 1996 ----- ----- ----- ----- ----- <S> <C> <C> <C> <C> <C> Cost-reimbursable 87% 90% 83% 88% 82% Guaranteed maximum price 4 3 8 1 2 Fixed-price 9 7 9 11 16 </TABLE> In accordance with industry practice, most of the Company's contracts are subject to termination at the discretion of the client. Contracts typically provide for reimbursement of costs incurred and payment of fees earned through the date of such termination. When the Company is directly responsible for engineering, design, procurement and construction of a project or the maintenance of a process plant, the Company reflects the cost of materials, equipment and subcontracts in both revenues and costs. On other projects, where the client elects to pay for such items directly, these amounts are not reflected in either revenues or costs. The approximate amounts of such costs included in revenues for the years ended September 30, 1992, 1993, 1994, 1995 and 1996 totaled $659.2 million, $610.7 million, $629.0 million, $1,001.3 million and $1,019.5 million, respectively. Page 7
Cost-reimbursable contracts --------------------------- Cost-reimbursable contracts provide for reimbursement of costs incurred by the Company plus a predetermined fee, or a fee based on a percentage of the costs incurred. The Company prefers this type of contract since it believes that the primary basis for its selection should be its technical expertise and professional qualifications rather than price considerations. Guaranteed maximum price contracts ---------------------------------- Guaranteed maximum price contracts are performed in the same manner as cost-reimbursable contracts; however, the total actual cost plus the fee cannot exceed the guaranteed price negotiated with the client. If the total actual cost of the contract exceeds the guaranteed maximum price, then the Company will bear all or a portion of the excess. In those cases where the total actual cost and fee are less than the guaranteed price, the Company will often share the savings on a predetermined basis with the client. Fixed-price contracts --------------------- Fixed-price contracts include both "negotiated fixed-price" contracts and "lump sum bid" contracts. Under a negotiated fixed-price contract, the Company is first selected as the contractor, and then the contract price is negotiated. Negotiated fixed-price contracts frequently exist in single-responsibility arrangements where the Company has the opportunity to perform engineering and design work before negotiating the total price of the project. Under lump sum bid contracts, the Company must bid against other contractors based upon specifications furnished by the client. This type of pricing presents certain inherent risks, including the possibility of ambiguities in the specifications, problems with new technologies and economic and other changes that may occur over the contract period, that are reduced by the negotiation process. Thus, although both types of contracts involve a firm price for the client, the lump sum bid contract provides the greater degree of risk to the Company. However, because of economies that may be realized during the contract term, both negotiated fixed-price and lump sum bid contracts may offer greater profit potential than the other types of contracts. COMPETITION - ----------- The Company is engaged in a highly competitive business. Some of its competitors are larger than the Company, or are subsidiaries of larger companies, and may possess greater resources than the Company. Furthermore, because the engineering aspect of the business does not usually require large amounts of capital, there is relative ease of market entry for a new potential entrant possessing acceptable professional qualifications. Accordingly, the Company competes with both national and international firms in sizes ranging from very large to a wide variety of small, regional and specialty firms. The extent of the Company's competition varies according to the industries and markets it serves, as well as the regions in which the Company is located. The Company's largest competitors for engineering, construction and maintenance services for process plants include such well-known companies as Bechtel Group, Inc., Fluor Corporation, Foster-Wheeler Corp., Raytheon Engineers, M.W. Kellogg, Parsons Co., Brown & Root, Inc., and John Brown. In the semiconductor industry, the Company's principal competitor is Industrial Design Corporation. In the area of pulp and paper, the Company's principal competitors include BE&K, Brown & Root, and Rust International. In the area of environmental engineering and hazardous waste cleanup, the Company's principal competitors include many of the companies listed above, as well as other specialized companies such as IT Corporation, ICF Kaiser and Roy F. Weston, Inc. Page 8
EMPLOYEES - --------- At September 30, 1996, the Company had approximately 7,350 full-time employees. Additionally, as of September 30, 1996, there were approximately 6,800 persons employed by the Company in the field on a project basis. The number of such field employees varies in relation to the number and size of the maintenance and construction projects in progress at any particular time. EXECUTIVE OFFICERS OF THE COMPANY Pursuant to the requirements of Item 401(b) and 401(e) of Regulation S-K, the following information is being furnished with respect to the Company's executive officers: <TABLE> <CAPTION> Year Joined Name Age Position with the Company the Registrant - -------------------------------------- --- ----------------------------------------- -------------- <S> <C> <C> <C> Joseph J. Jacobs 80 Director and Chairman of the Board 1947 Noel G. Watson 60 President, Chief Executive Officer and Director 1965 Robert M. Barton 74 Secretary 1957 William R. Kerler 67 Executive Vice President, Operations 1980 Donald J. Boutwell 59 Group Vice President, Field Services 1984 Andrew E. Carlson 63 Group Vice President, Field Services 1990 Socrates S. Christopher 61 President, Jacobs - Sirrine Engineers (a Division of Jacobs Engineering Group Inc.) 1994 Arlan C. Emmert 51 Group Vice President, Western Region 1985 Thomas R. Hammond 45 Group Vice President, Central Region 1975 John McLachlan 50 Group Vice President, Northern Region 1974 Richard J. Slater 50 Group Vice President, European Region 1980 Roger L. Williams 58 Group Vice President, Southern Region 1983 Gregory J. Landry 48 Senior Vice President, Quality and Safety 1984 Craig L. Martin 47 Senior Vice President, General Sales and Marketing 1994 Paul A. Miskimin 56 Senior Vice President, Federal Programs 1987 John W. Prosser, Jr. 51 Senior Vice President, Finance and 1974 Administration and Treasurer Nazim G. Thawerbhoy 49 Senior Vice President and Controller 1979 William C. Markley, III 51 Vice President, Law 1981 </TABLE> All of the officers listed in the preceding table serve in their respective capacities at the pleasure of the Board of Directors and, with the exception of Messrs. Christopher and Martin, have served in executive capacities with the Company or have been part of its management for more than five years. Prior to joining the Company in 1994, Messrs. Christopher and Martin were part of the management of CRSS Inc. or one of its subsidiaries for at least five years. Mr. Christopher retired from full-time employment with the Company effective December 1, 1996, but will continue to make his services available as a Senior Consultant focusing on strategic acquisitions, marketing studies and other initiatives, particularly for the Pulp and Paper industry. Page 9
ITEM 2. PROPERTIES The Company owns and leases offices for its professional, technical and administrative staff totaling approximately 1.8 million square feet. The following is a list of the Company's principal locations: <TABLE> <CAPTION> Country State City ------- ----- ---- <S> <C> <C> U.S.A. California Pasadena Long Beach Martinez Sacramento Arizona Phoenix Colorado Denver Florida Lakeland Louisiana Baton Rouge New Mexico Albuquerque North Carolina Raleigh Ohio Cincinnati Oregon Portland Pennsylvania Philadelphia South Carolina Greenville Orangeburg Texas Houston Tennessee Oak Ridge Virginia Arlington United Kingdom - London - Glasgow - Manchester Republic of Ireland - Cork - Dublin </TABLE> In addition to these properties, the Company leases smaller, project offices located throughout the United States. The Company maintains sales offices at many of its principal locations. The Company has equipment yards located in Houston, Texas and Baton Rouge, Louisiana. The majority of the Company's offices are leased. The Company also rents a portion of its construction equipment on a short-term basis. ITEM 3. LEGAL PROCEEDINGS In the normal course of business, the Company is subject to certain contractual guarantees and litigation. Generally, such guarantees relate to construction schedules and plant performance. Most of the litigation involves the Company as a defendant in workers' compensation, personal injury and other similar lawsuits. Management believes, after consultation with counsel, that these guarantees and litigation should not have any material adverse effect on the Company's consolidated financial statements. ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS Not applicable. Page 10
PART II ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS The information required by this Item is hereby incorporated by reference from the Financial Statements section of the Company's 1996 Annual Report to Shareholders, copies of which financial statements section is being delivered to the Commission (but not filed with, except to the extent incorporated herein) as an Exhibit to this report. ITEM 6. SELECTED FINANCIAL DATA The information required by this Item is hereby incorporated by reference from the Financial Statements section of the Company's 1996 Annual Report to Shareholders, copies of which are being delivered to the Commission (but not filed with, except to the extent incorporated herein) as an Exhibit to this report. ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS The information required by this Item is hereby incorporated by reference from the Financial Statements section of the Company's 1996 Annual Report to Shareholders, copies of which are being delivered to the Commission (but not filed with, except to the extent incorporated herein) as an Exhibit to this report. ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA The information required by this Item is hereby incorporated by reference from the Financial Statements section of the Company's 1996 Annual Report to Shareholders, copies of which are being delivered to the Commission (but not filed with, except to the extent incorporated herein) as an Exhibit to this report. ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON FINANCIAL AND DISCLOSURE MATTERS Not applicable. PART III ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT The information required by Paragraph (a) and Paragraphs (c) through (g) of Item 401 and by Item 405 of Regulation S-K is hereby incorporated by reference from the Company's definitive proxy statement to be filed with the Commission pursuant to Regulation 14A within 120 days after the close of the Company's fiscal year. See the information under the caption "Executive Officers of the Company" in Part I of this report for information required by Paragraph (b) of Item 401 of Regulation S-K. Page 11
ITEM 11. EXECUTIVE COMPENSATION The information required by this Item is hereby incorporated by reference from the Company's definitive proxy statement to be filed with the Commission pursuant to Regulation 14A within 120 days after the close of the Company's fiscal year. ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT The information required by this Item is hereby incorporated by reference from the Company's definitive proxy statement to be filed with the Commission pursuant to Regulation 14A within 120 days after the close of the Company's fiscal year. ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS The information required by this Item is hereby incorporated by reference from the Company's definitive proxy statement to be filed with the Commission pursuant to Regulation 14A within 120 days after the close of the Company's fiscal year. Page 12
PART IV ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K (a) The Company's consolidated financial statements at September 30, 1996 and 1995 and for each of the three years in the period ended September 30, 1996, together with the report of the independent auditors on those consolidated financial statements are hereby incorporated by reference from the Financial Statements section of the Company's 1996 Annual Report to Shareholders, copies of which are being delivered to (but not filed with, except to the extent incorporated herein) the Commission as an exhibit to this report. (b) Not applicable. (c) Exhibits and Index to Exhibits: 2.1 Purchase Agreement dated July 29, 1994 between Jacobs Engineering Group Inc. and CRSS Inc. including a schedule of annexes and exhibits. Filed as Exhibit 1. to the Registrant's Current Report on Form 8-K dated August 5, 1994 and incorporated herein by reference. 3.1 Certificate of Incorporation of the Registrant, as amended. Filed as Exhibit 3.1 to the Registrant's Quarterly Report on Form 10-Q for the period ended June 30, 1995 and incorporated herein by reference. 3.2 Bylaws of the Registrant, as amended. Filed as Exhibit 3.2 to the Registrant's Quarterly Report on Form 10-Q for the period ended June 30, 1995 and incorporated herein by reference. 4.1 See Sections 5 through 18 of Exhibit 3.1. 4.2 See Article II, Section 3.03 of Article III, Article VI and Section 8.04 of Article VIII of Exhibit 3.2. 4.3 Rights Agreement dated as of December 20, 1990 by and between Registrant and First Interstate Bank, Ltd. as Rights Agent. Filed as Exhibit 4.4 to Registrant's Quarterly Report on Form 10- Q for the period ended June 30, 1995 and incorporated herein by reference. 10.1 The Jacobs Engineering Group Inc. 1981 Executive Incentive Plan (As Amended and Restated). Filed as Exhibit 10.1 to the Registrant's Quarterly Report on Form 10-Q for the period ended June 30, 1995 and incorporated herein by reference. 10.2 The Jacobs Engineering Group Inc. Incentive Bonus Plan for Officers and Key Managers. Filed as Exhibit 10.2 to the Registrant's Quarterly Report on Form 10-Q for the period ended June 30, 1995 and incorporated herein by reference. 10.3 Agreement dated as of November 30, 1993 between the Registrant and Dr. Joseph J. Jacobs, and the Agreement dated as of November 30, 1994 between the Registrant and Dr. Joseph J. Jacobs. Filed as Exhibit 10.3 to the Registrant's Quarterly Report on Form 10-Q for the period ended June 30, 1995 and incorporated herein by reference. Page 13
10.4 Agreement dated as of November 30, 1995 between the Registrant and Dr. Joseph J. Jacobs. Filed as Exhibit 10.4 to the Registrant's 1995 Annual Report on Form 10-K and incorporated herein by reference. (S) 10.5 Agreement dated as of December 5, 1996 between the Registrant and Dr. Joseph J. Jacobs. 10.6 The Executive Security Program of Jacobs Engineering Group Inc. Filed as Exhibit 10.4 to the Registrant's Quarterly Report on Form 10-Q for the period ended June 30, 1995 and incorporated herein by reference. 10.7 Jacobs Engineering Group Inc. and Subsidiaries 1991 Executive Deferral Plan, effective June 1, 1991. Filed as Exhibit 10.5 to the Registrant's Quarterly Report on Form 10-Q for the period ended March 31, 1995 and incorporated herein by reference. 10.8 Jacobs Engineering Group Inc. and Subsidiaries 1993 Executive Deferral Plan, effective December 1, 1993. Filed as Exhibit 10.6 to the Registrant's Quarterly Report on Form 10-Q for the period ended March 31, 1995 and incorporated herein by reference. 10.9 The Jacobs Engineering Group Inc. 1989 Employee Stock Purchase Plan. Filed as Exhibit 10.9 to the Registrant's Quarterly Report on Form 10-Q for the period ended June 30, 1995 and incorporated herein by reference. 10.10 Form of Indemnification Agreement entered into between the Registrant and its officers and directors. Filed as Exhibit 10.10 to the Registrant's Quarterly Report on Form 10-Q for the period ended June 30, 1995 and incorporated herein by reference. 10.11 Jacobs Engineering Group Inc. 401(k) Plus Savings Plan and Trust. Filed as Exhibit 10.11 to the Registrant's Quarterly Report on Form 10-Q for the period ended March 31, 1995 and incorporated herein by reference. (S) 11. Statement of computation of net income per outstanding share of common stock is hereby incorporated by reference from the Financial Statements section of the Company's 1996 Annual Report to Shareholders, copies of which are being delivered to (but not filed with, except to the extent incorporated herein) the Commission as an exhibit to this report. (S) 13. Financial Statements section of Jacobs Engineering Group Inc. Annual Report to Shareholders for the fiscal year ended September 30, 1996. (S) 21. List of Subsidiaries of Jacobs Engineering Group Inc. (S) 23. Consent of Independent Auditors. (S) 27.1 Financial Data Schedules. ______________ (S) Being filed herewith. Page 14
UNDERTAKINGS For the purposes of complying with the amendments to the rules governing Form S-8 (effective July 13, 1990) under the Securities Act of 1933, the undersigned Registrant hereby undertakes as follows, which undertaking shall be incorporated by reference into the Registrant's Registration Statements on Form S-8 Nos. 33-45914 (filed February 21, 1992) and 33-45927 (filed February 24, 1992): Insofar as indemnification for liabilities arising under the Securities Act of 1933 may be permitted to directors, officers and controlling persons of the Registrant pursuant to the foregoing provisions, or otherwise, the Registrant has been advised that in the opinion of the Securities and Exchange Commission such indemnification is against public policy as expressed in the Securities Act of 1933 and is, therefore, unenforceable. In the event that a claim for indemnification against such liabilities (other than the payment by the Registrant of expenses incurred or paid by a director, officer or controlling person of the Registrant in the successful defense of any action, suit or proceeding) is asserted by such director, officer or controlling person in connection with the securities being registered, the Registrant will, unless in the opinion of its counsel the matter has been settled by controlling precedent, submit to a court of appropriate jurisdiction the question whether such indemnification by it is against public policy as expressed in the Act and will be governed by final adjudication of such issue. Page 15
SIGNATURES Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Company has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized. JACOBS ENGINEERING GROUP INC. Dated: December 27, 1996 By: NOEL G. WATSON ---------------------------- Noel G. Watson President, Chief Executive Officer and Director (Principal Executive Officer) Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Company and in the capacities and on the dates indicated: <TABLE> <CAPTION> SIGNATURE TITLE DATE <S> <C> <C> NOEL G. WATSON Director and December 27, 1996 - ----------------------------------- Principal Executive Officer Noel G. Watson JOSEPH J. JACOBS Director December 27, 1996 - ----------------------------------- Joseph J. Jacobs JOSEPH F. ALIBRANDI Director December 27, 1996 - ----------------------------------- Joseph F. Alibrandi PETER H. DAILEY Director December 27, 1996 - ----------------------------------- Peter H. Dailey ROBERT B. GWYN Director December 27, 1996 - ----------------------------------- Robert B. Gwyn LINDA K. JACOBS Director December 27, 1996 - ----------------------------------- Linda K. Jacobs J. CLAYBURN LaFORCE Director December 27, 1996 - ----------------------------------- J. Clayburn LaForce DALE R. LAURANCE Director December 27, 1996 - ----------------------------------- Dale R. Laurance LINDA FAYNE LEVINSON Director December 27, 1996 - ----------------------------------- Linda Fayne Levinson Director December 27, 1996 - ----------------------------------- David M. Petrone JAMES L. RAINEY, JR. Director December 27, 1996 - ----------------------------------- James L. Rainey, Jr. JOHN W. PROSSER, JR. Senior Vice President December 27, 1996 - ----------------------------------- Finance and Administration, John W. Prosser, Jr. and Treasurer (Principal Financial Officer) NAZIM G. THAWERBHOY Senior Vice President and December 27, 1996 - ----------------------------------- Controller (Principal Accounting Nazim G. Thawerbhoy Officer) </TABLE> Page 16