Illinois Tool Works - 10-Q quarterly report FY

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark One)

Commission File Number: 1-4797

ILLINOIS TOOL WORKS INC.

(Exact name of registrant as specified in its charter)

(Registrant’s telephone number, including area code) 847-724-7500

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated file (as defined in Rule 12b-2 of the Exchange Act).

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

The number of shares of registrant’s common stock, $.01 par value, outstanding at September 30, 2006: 566,878,213.

Part I – Financial Information

Item 1 – Financial Statements

ILLINOIS TOOL WORKS INC. and SUBSIDIARIES

FINANCIAL STATEMENTS

The unaudited financial statements included herein have been prepared by Illinois Tool Works Inc. and Subsidiaries (the “Company” or “ITW”). In the opinion of management, the interim financial statements reflect all adjustments of a normal recurring nature necessary for a fair statement of the results for interim periods. It is suggested that these financial statements be read in conjunction with the financial statements and notes to financial statements included in the Company’s Annual Report on Form 10-K. Certain reclassifications of prior years’ data have been made to conform with current year reporting.

ILLINOIS TOOL WORKS INC. and SUBSIDIARIES

STATEMENT OF INCOME

(UNAUDITED)

(In thousands except for per share amounts)

ILLINOIS TOOL WORKS INC. and SUBSIDIARIES

STATEMENT OF FINANCIAL POSITION

(UNAUDITED)

(In thousands)

ILLINOIS TOOL WORKS INC. and SUBSIDIARIES

STATEMENT OF CASH FLOWS

(UNAUDITED)

(In thousands)

ILLINOIS TOOL WORKS INC. and SUBSIDIARIES

NOTES TO FINANCIAL STATEMENTS

(UNAUDITED)

Investment income by investment category for the periods ended September 30, 2006 and 2005 were as follows:

(In thousands)

The Company’s only component of other comprehensive income in the periods presented is foreign currency translation adjustments.

(In thousands)

Inventories at September 30, 2006 and December 31, 2005 were as follows:

(In thousands)

Goodwill represents the excess cost over fair value of the net assets of purchased businesses. The Company does not amortize goodwill or intangible assets that have indefinite lives. In the first quarter of each year, the Company performs an annual impairment assessment of goodwill and intangible assets with indefinite lives based on the fair value of the related reporting unit or intangible asset.

As of January 1, 2006, the Company had assigned its recorded goodwill and intangible assets to approximately 375 of its 700 reporting units. When performing its annual impairment assessment, the Company compares the fair value of each reporting unit to its carrying value. Fair values are determined by discounting estimated future cash flows at the Company’s estimated cost of capital of 10%. Estimated future cash flows are based either on current operating cash flows or on a detailed cash flow forecast prepared by the relevant operating unit. If the fair value of an operating unit is less than its carrying value, an impairment loss is recorded for the difference between the implied fair value of the unit’s goodwill and the carrying value of the goodwill.

Amortization and impairment of goodwill and other intangible assets for the periods ended September 30, 2006 and 2005 were as follows:

(In thousands)

In the first quarter of 2006, the Company performed its annual impairment testing of its goodwill and intangible assets, which resulted in impairment charges of $12,185,000. The first quarter 2006 goodwill impairment charges of $9,200,000 were primarily related to a U.S. joist business, a U.S. thermal transfer ribbon business and an Asian construction business, and resulted from lower estimated future cash flows than previously expected. Also in the first quarter of 2006, intangible asset impairments of $2,985,000 were recorded to reduce to the estimated fair value the carrying value of trademarks, patents and customer-related intangible assets primarily related to a U.S. welding components business in the Specialty Systems – North America segment and a U.S. contamination control business in the Engineered Products – North America segment.

In the first quarter of 2005, the Company recorded goodwill impairment charges of $6,206,000, which were primarily related to a Canadian stretch packaging equipment business and a U.S. welding components business, and which resulted from lower estimated future cash flows than previously expected. Also in the first quarter of 2005, intangible asset impairments of $5,049,000 were recorded to reduce to estimated fair value the carrying value of trademarks, patents and customer-related intangible assets related to a U.S. business that manufactures clean room mats in the Engineered Products – North America segment.

Pension and other postretirement benefit costs for the periods ended September 30, 2006 and 2005 were as follows:

(In thousands)

The Company expects to contribute $107,300,000 to its pension plans in 2006. As of September 30, 2006, contributions of $83,500,000 have been made.

In June 2005, the Company entered into a $600,000,000 Line of Credit Agreement with a termination date of June 16, 2006. This line of credit was replaced on June 16, 2006, by a $600,000,000 Line of Credit Agreement with a termination date of June 15, 2007. No amounts were outstanding under this facility at September 30, 2006.

The Company had outstanding commercial paper of $449,784,000 at September 30, 2006 and $94,488,000 at December 31, 2005.

In June 2005, the Company entered into a $350,000,000 revolving credit facility (“RCF”) with a termination date of June 17, 2010. This RCF was replaced on June 16, 2006 by a $350,000,000 RCF with a termination date of June 16, 2011. No amounts were outstanding under this facility at September 30, 2006.

The Company is subject to various legal proceedings and claims that arise in the ordinary course of business, including those involving environmental, tax, product liability (including toxic tort) and general liability claims. The Company accrues for such liabilities when it is probable that future costs will be incurred and such costs can be reasonably estimated. Such accruals are based on developments to date, the Company’s estimates of the outcomes of these matters and its experience in contesting, litigating and settling other similar matters. The Company believes resolution of these matters, individually and in the aggregate, will not have a material adverse effect on the Company’s financial position, liquidity or future operations.

Among the toxic tort cases in which the Company is a defendant, the Company as well as its subsidiaries Hobart Brothers Company and Miller Electric Mfg. Co., have been named, along with numerous other defendants, in lawsuits alleging injury from exposure to welding consumables. The plaintiffs in these suits claim unspecified damages for injuries resulting from the plaintiffs’ alleged exposure to asbestos, manganese and/or toxic fumes in connection with the welding process. Based upon the Company’s experience in defending these claims, the Company believes that the resolution of these proceedings will not have a material adverse effect on the Company’s financial position, liquidity or future operations. The Company has not recorded any significant reserves related to these cases.

Wilsonart International, Inc. (“Wilsonart”), a wholly-owned subsidiary of the Company, was a defendant in a consolidated class action lawsuit filed in 2000 in federal district court in White Plains, New York on behalf of direct purchasers of high-pressure laminate. The complaint alleged that Wilsonart participated in a conspiracy with competitors to fix, raise, maintain or stabilize prices for high pressure laminate between 1994 and 2000 and sought injunctive relief and treble damages. In addition, indirect purchasers of high-pressure laminate filed similar purported class action cases under various state antitrust and consumer protection laws in 13 states and the District of Columbia, all of which cases were stayed pending the outcome of the consolidated class action. On May 24, 2006, after a two month trial, a federal jury unanimously rejected the plaintiffs’ claims and rendered a verdict in favor of Wilsonart in the consolidated class action lawsuit. Judgment was entered on the verdict, and that judgment is now final because plaintiffs’ time to appeal has expired. The stay of the 13 states and District of Columbia proceedings has continued, and several of those cases are in the process of being voluntarily dismissed by the plaintiffs. The Company intends to vigorously defend any cases which remain.

On May 5, 2006, the Board of Directors of ITW approved a two-for-one split of the Company’s common stock, with an effective date of May 25, 2006, at a rate of one additional share for each common share held by stockholders of record on May 18, 2006. All per-share data is reported on a post-split basis.

(10)     SHARE REPURCHASE PROGRAM

On August 4, 2006 the Company’s Board of Directors authorized a share repurchase program which provides for the buy back of up to 35 million shares.

See Management’s Discussion and Analysis for information regarding operating revenues and operating income for the Company’s segments.

In the first quarter of 2006, the Company announced that given the planned run-off of assets in the Leasing and Investments portfolio and its desire to utilize free cash flow for core manufacturing investments and acquisitions rather than to make additional financial investments, its internal reporting has been revised to eliminate the reporting of Leasing and Investments as an operating segment. Accordingly, income from Leasing and Investment activities have been reported as non-operating investment income. Leasing and Investments’ results have been reclassified to investment income in the prior year’s income statement to conform to the current year’s presentation, as follows:

(In thousands)

In July 2006, the Financial Accounting Standards Board (“FASB”) issued FASB Interpretation No. 48, (“FIN 48”) “Accounting for Uncertainty in Income Taxes – an interpretation of FASB Statement No. 109.” FIN 48 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return, and provides guidance on derecognition, classification, and interest and penalties, related to uncertain tax positions. FIN 48 will be effective for the Company on January 1, 2007, with any cumulative effect of the change in accounting principle recorded as an adjustment to opening retained earnings. The Company is currently assessing the impact of the adoption of FIN 48 on its financial statements.

In July 2006, the FASB issued FASB Staff Position FAS 13-2 (“FSP 13-2”), “Accounting for a Change or Projected Change in the Timing of Cash Flows Relating to Income Taxes Generated by a Leveraged Lease Transaction.” FSP 13-2 addresses how a change or projected change in the timing of cash flows relating to income taxes generated by a leveraged lease transaction affects the accounting by a lessor for that lease. FSP 13-2 will be effective for the Company on January 1, 2007, with any cumulative effect of the change in accounting principle recorded as an adjustment to opening retained earnings. The Company is currently assessing the impact of the adoption of FSP 13-2 on its financial statements.

In September 2006, the FASB issued SFAS No. 158, Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans – an amendment of FASB Statements No. 87, 88, 106 and 132(R) (“SFAS 158”). Effective in the fourth quarter of 2006, SFAS 158 requires employers to recognize the overfunded or underfunded status of all postretirement plans as an asset or liability in its statement of financial position and to recognize previously unrecognized changes in that funded status through other comprehensive income.  Effective for the fiscal year ending 2008, SFAS 158 requires the measurement date for plan assets and liabilities to coincide with the Company’s year-end. The Company is currently assessing the impact of the adoption of SFAS 158 on its financial statements.

Item 2 - Management’s Discussion and Analysis

CONSOLIDATED RESULTS OF OPERATIONS

The Company’s consolidated results of operations for the third quarter and year-to-date periods of 2006 and 2005 were as follows:

(Dollars in thousands)

In the third quarter and year-to-date periods of 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

North American base business revenues increased 0.6% and 4.3% in the third quarter and year-to-date periods of 2006, respectively. Base business revenues increased 5.0% and 3.9% internationally for the same periods. The growth in North American revenues was primarily due to a reasonably strong industrial production environment that includes moderating demand in the capital equipment and consumable markets served by ITW, partially offset by a decline in construction and automotive demand. Improvements in economic growth conditions in Europe contributed to the international base revenue growth in the third quarter and year-to-date.

Operating income for the third quarter and year-to-date periods of 2006 improved due to leverage from the growth in base business revenue, income from acquired companies and lower restructuring expenses. Currency translation positively impacted operating income in the third quarter of 2006 but had a negative impact for the year-to-date period. Variable margins declined 60 basis points in the third quarter primarily due to sales volume decreases for certain businesses in North America and margin declines related to increased raw material costs and related price increases. For the year-to-date period, variable margins increased 50 basis points due to operating efficiency gains. Income for the year-to-date period was favorably impacted by a first quarter 2005 charge of $8.7 million to resolve accounting issues at a European food equipment business. In addition, consolidated operating income in the first quarter of 2006 was negatively impacted by a $19.7 million charge related to retiree health care and life insurance liabilities.

As a result of the Company’s annual impairment testing of its goodwill and intangible assets, impairment charges of $12.2 million were incurred in the first quarter of 2006. The impaired assets reflected diminished expectations of future cash flows and primarily related to a U.S. joist business, a U.S. welding components business, a U.S. thermal transfer ribbon business, an Asian construction business and a contamination control business.

ENGINEERED PRODUCTS - NORTH AMERICA

Businesses in this segment are located in North America and manufacture a variety of short lead-time plastic and metal components and fasteners, as well as specialty products for a diverse customer base. These commercially oriented, value-added products become part of the customers’ products and typically are manufactured and delivered in a time period less than 30 days.

This segment primarily serves the construction, automotive and general industrial markets.

The results of operations for the Engineered Products – North America segment for the third quarter and year-to-date periods of 2006 and 2005 were as follows:

(Dollars in thousands)

In the third quarter and year-to-date periods of 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

Revenues increased in the third quarter and year-to-date periods of 2006 primarily due to revenues from acquisitions. Base business revenues declined in the third quarter of 2006 while year-to-date base revenues increased versus the prior year. The acquired revenue growth was primarily related to the acquisition of a construction business, an aerosol anti-static business and a polymer business. Construction base revenues decreased 4.6% in the third quarter of 2006 primarily due to the slowdown in residential construction. Base revenues for construction increased 0.6% for the year-to-date period primarily as a result of growth in the commercial construction markets and new product introductions at the Wilsonart business in the first quarter of 2006. Automotive base revenues decreased by 8.4% for the third quarter and 1.8% year-to-date as automotive production at the North American Big 3 automotive manufacturers decreased 13% in the third quarter of 2006 and declined 3% year-to-date. Base revenues from the other industrial-based businesses in this segment grew 5.7% and 6.7% for the third quarter and year-to-date periods, respectively, as a result of increased demand in a broad array of end markets, particularly the fluid products and industrial plastics and metals businesses.

Operating income was virtually flat in the third quarter of 2006 primarily due to the decline in base revenues described above offset by income from acquisitions. Additionally, higher restructuring costs in the automotive fasteners group lowered income in the third quarter. Year-to-date income increased primarily due to leverage from the growth in base business revenues, income from acquisitions and lower operating expenses. Variable margins decreased 110 basis points in the third quarter of 2006 primarily due to volume decreases and operating inefficiencies in the automotive and construction businesses. Year-to-date variable margins are up 50 basis points due to operating efficiency gains. Year-to-date 2006 income was unfavorably impacted by higher goodwill and intangible asset impairment charges. In the first quarter of 2006, an impairment charge of $5.6 million was recorded primarily related to the goodwill of a U.S. joist business and the intangibles of a contamination control business. In addition, year-to-date income was negatively impacted by a first quarter 2006 charge of $9.8 million related to retiree healthcare and life insurance liabilities.

ENGINEERED PRODUCTS - INTERNATIONAL

Businesses in this segment are located outside North America and manufacture a variety of short lead-time plastic and metal components and fasteners, as well as specialty products for a diverse customer base. These commercially oriented, value-added products become part of the customers’ products and typically are manufactured and delivered in a time period less than 30 days.

This segment primarily serves the construction, automotive and general industrial markets.

The results of operations for the Engineered Products – International segment for the third quarter and year-to-date periods of 2006 and 2005 were as follows:

(Dollars in thousands)

In the third quarter and year-to-date periods of 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

Revenues increased in the third quarter and year-to-date periods of 2006 due to an increase in base business revenues and revenue from acquisitions. The revenues from acquisitions increased primarily due to an acquisition of a European construction business, a European laminate business and a European reclosable packaging business. Currency translation had a favorable impact on revenues in the third quarter of 2006 while negatively impacting the year-to-date period. Base business construction revenue increased 6.1% and 3.5% in the third quarter and year-to-date periods, respectively, due to strong demand in both the European and Australasia markets. Automotive base revenues were flat in the third quarter, due to flat European automotive car builds during the third quarter of 2006, but increased 1.5% year-to-date. Base revenues from the other businesses in this segment increased 5.6% and 4.2% in the third quarter and year-to-date periods of 2006 as they benefited from stronger demand in a broad array of industrial and commercial end markets that they serve.

Operating income for the third quarter and year-to-date periods of 2006 increased primarily due to the positive leverage effect from the increase in base revenue and lower restructuring expenses. Variable margins declined 160 basis points in the third quarter of 2006 mainly due to margin declines related to increased raw material costs. Increased operating expenses and higher overhead expenses negatively impacted income in the year-to-date period. Operating income was favorably impacted by currency translation in the third quarter of 2006 and negatively impacted in the year-to-date period. Year-to-date income was negatively affected by a $1.7 million impairment charge related to two Asian construction businesses in the first quarter of 2006.

SPECIALTY SYSTEMS - NORTH AMERICA

Businesses in this segment are located in North America and design and manufacture longer lead-time machinery and related consumables, as well as specialty equipment for a diverse customer base. These commercially oriented, value-added products become part of the customers’ processes and typically are manufactured and delivered in a time period of more than 30 days.

This segment primarily serves the food institutional and retail, general industrial, construction, and food and beverage markets.

The results of operations for the Specialty Systems – North America segment for the third quarter and year-to-date periods of 2006 and 2005 were as follows:

(Dollars in thousands)

In the third quarter and year-to-date periods of 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors:

Base business revenue growth in the third quarter and year-to-date periods of 2006 was primarily due to increased demand for machinery and consumables in many of the end markets that this segment serves. Welding base revenues increased 11.8% and 18.1% in the third quarter and year-to-date periods of 2006 respectively, due to high demand in the energy, heavy fabrication and general industrial markets. Total packaging base revenues declined 1.0% in the third quarter and increased 2.9% for the year-to-date period of 2006, primarily due to third quarter declines in the industrial packaging systems and multipack carrier businesses. Food equipment base revenues increased 2.1% and 2.2% in the third quarter and year-to-date period, respectively, due to growth in the restaurant and institutional sector as well as the service business. Base business revenue in the other businesses in this segment, including the marking, decorating and finishing businesses, declined 2.4% in the third quarter and increased 1.5% for the year-to-date period. The acquired revenues were primarily due to the acquisition of a materials and structural testing business in the fourth quarter of 2005, a solder materials business in the second quarter of 2006, an industrial packaging business in the second quarter of 2006 and a coding business in the first quarter of 2006.

Operating income increased in the third quarter and year-to-date periods of 2006 primarily due to leverage from base business revenue increases described above. Variable margins declined 50 basis points in the third quarter due to higher raw material costs and product mix issues. Variable margins increased 60 basis points year-to-date mainly due to operating efficiency gains. Operating income was also higher year-to-date due to lower goodwill and intangible asset impairment charges over the prior year. In the first quarter of 2006, a goodwill and intangible asset impairment charge of $4.7 million was recorded related to the goodwill of a thermal transfer ribbon business and the goodwill and intangibles of a welding components business. In the first quarter of 2005 an impairment charge of $6.1 million was incurred related to a stretch packaging business and welding components business. Operating income declined in the third quarter of 2006 and year-to-date due to higher restructuring expenses in the decorating businesses, food equipment businesses and revenue stamp equipment business. In addition, operating income was unfavorably impacted year-to-date by a first quarter 2006 charge of $9.8 million related to retiree healthcare and life insurance liabilities.

SPECIALTY SYSTEMS - INTERNATIONAL

Businesses in this segment are located outside North America and design and manufacture longer lead-time machinery and related consumables, as well as specialty equipment for a diverse customer base. These commercially oriented, value-added products become part of the customers’ processes and typically are manufactured and delivered in a time period of more than 30 days.

This segment primarily serves the general industrial, food institutional and retail, and food and beverage markets.

The results of operations for the Specialty Systems – International segment for the third quarter and year-to-date periods of 2006 and 2005 were as follows:

(Dollars in thousands)

In the third quarter and year-to-date periods of 2006, the changes in revenues, operating income and operating margins over the prior year were primarily due to the following factors: