Frequency Electronics - 10-K annual report 2026

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM10-K

(Mark one)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the Fiscal Year ended April 30, 2026

OR

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                          to                      

Commission File No. 1-8061

FREQUENCY ELECTRONICS, INC.

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code: 516-794-4500

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ☐No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of voting common equity held by non-affiliates of the registrant as of October 31, 2025 – $240,400,000

The number of shares outstanding of registrant’s Common Stock, par value $1.00 per share, as of July 15, 2026 – 9,870,077

FREQUENCY ELECTRONICS, INC. and SUBSIDIARIES

TABLE OF CONTENTS

PART I

Item 1. Business

GENERAL DISCUSSION

Frequency Electronics, Inc. (sometimes referred to as “Registrant”, “Frequency Electronics” or the “Company”) is a world leader in precision time and frequency generation technology, which is incorporated into commercial and U.S. Government satellites, Command, Control, Communication, Computer, Intelligence, Surveillance and Reconnaissance (“C4ISR”), and Electronic Warfare (“EW”) systems. Its technology is used for a wide range of space and non-space applications.

Unless the context indicates otherwise, references to the Registrant, Frequency Electronics or the Company are to Frequency Electronics, Inc. and its subsidiaries. References to “FEI” are to the parent company alone and do not refer to any of the subsidiaries. Frequency Electronics, a Delaware corporation, has its principal executive office at 55 Charles Lindbergh Boulevard, Mitchel Field, New York 11553. Its telephone number is 516-794-4500 and its website is www.frequencyelectronics.com.

Frequency Electronics was founded in 1961 as a research and development firm generating proprietary precision time and frequency technology primarily under contracts for end-use by the United States (“U.S.”) Government. In the mid-1990’s, the Company evolved into a designer, developer and manufacturer of state-of-the-art products for both commercial and government end-use. The Company’s present mission is to be the world leader in providing precision time and low phase noise frequency generation systems, from 1 Hz to 46 GHz for space and other challenging environments. The Company’s technology is the key element in enhancing the functionality and performance of many electronic systems.

CORPORATE STRUCTURE AND RESTRUCTURING

On April 30, 2026, FEI-Elcom Tech, Inc. (“FEI-Elcom”) a wholly-owned subsidiary of the Company, was converted into a Delaware limited liability company. The ongoing business operations of FEI-Elcom will continue under the FEI-NY segment. This restructuring was a transaction between entities under common control and did not result in a change in the consolidated financial statements of the Company. For more information regarding the Company’s restructuring, see Note 1 to the Consolidated Financial Statements.

MARKETS

The Company’s principal end markets are time and frequency generation and distribution systems for use in satellite payloads and terrestrial secure command control and communications systems.

For the satellite market, the Company has a unique legacy of providing master timing systems, power converters, and frequency generation, synthesis and distribution systems. These products are applicable for both commercial and U.S. Government end-use. Currently, it is estimated that there are over 14,000 U.S. satellites with varying remaining useful lives operating in Geostationary, Medium and Low Earth Orbits (“LEO”). The number of operational satellites with emphasis on high-throughput is expected to continue to grow over the next ten years as demand for higher bandwidths and improved anti-jam-anti-spoofing increases. Furthermore, the U.S. Government is expected to contract options for additional GPS III satellites, and the Company believes it is well positioned to compete for the onboard clock ensemble with its high-precision digital Rubidium atomic frequency standard.

For the terrestrial secure command control and communications systems market, the Company’s products support multiple C4ISR and EW applications for the U.S. Government on land, sea and air-borne platforms. Recently identified threats to the communication capabilities of U.S. Government facilities through jamming or “spoofing” global positioning systems (“GPS”) signals may be mitigated by the Company’s technologies. In addition, similar types of threats to the public and enterprise networks have been identified by the U.S. Department of Homeland Security. The Company’s high precision, ruggedized clocks combined with specialized software are essential for certain secure communication systems.

To address these markets, the Company has several corporate entities that operate under two reportable segments primarily based on the geographic locations of its subsidiaries. The two reportable segments are (1) FEI-NY, which includes the subsidiaries FEI Government Systems, Inc. and FEI Communications, Inc., and, until April 30, 2026, included FEI-Elcom; and (2) FEI-Zyfer, Inc. (“FEI-Zyfer”).

Frequency Electronics has made a strategic decision to focus on satellite payloads, C4ISR and EW market segments, because the Company believes these business areas represent significant opportunities for revenue growth.

1.FEI-NY

FEI Government Systems, Inc. and FEI Communications, Inc. design and manufacture U.S. Government and commercial satellite electronics, as well as products for the U.S. military and commercial telecom customers. These products are designed and manufactured at the Company’s Long Island, New York headquarters facility.

Until April 30, 2026, FEI-Elcom designed and manufactured Radio Frequency (“RF”) microwave modules, devices and subsystems up to 60 GHz including fast switching, ultra-low phase noise synthesizers, up-down converters, receivers, tuners, ceramic resonance oscillators and dielectric resonance oscillators.

2.FEI-Zyfer – Precision time references for terrestrial secure communications and command and control, and frequency products that incorporate GPS technology are manufactured by FEI-Zyfer. FEI-Zyfer’s GPS capability complements the Company’s existing technologies and permits the combined entities to provide a broader range of embedded systems for a variety of timing functions and anti-spoofing applications.

For additional information about these reportable segments, see Item 1. Business – Reportable Segments and Products below.

REPORTABLE SEGMENTS AND PRODUCTS

The Company operates under two reportable segments, primarily aligned with the geographical locations of its subsidiaries: (1) FEI-NY and (2) FEI-Zyfer. Within each segment the Company designs, develops, manufactures and markets precision time and frequency control products for different markets as described below. The Company’s Chief Operating Decision Maker (“CODM”) measures segment performance based on total revenues, cost of revenues, and profits generated by each geographic center rather than on the specific types of customers or end-users. Consequently, the Company determined that the segments indicated above appropriately reflect the way the Company’s CODM views the business. The FEI-NY segment, which includes the parent company, FEI, operates out of the Company’s Long Island, New York headquarters facility. The FEI-NY segment also includes the operations of FEI-Elcom. FEI-Elcom, in addition to its own product line, provides design and technical support for FEI’s business. Effective as of April 30, 2026, FEI-Elcom converted into a Delaware limited liability company; however, the ongoing business operations of FEI-Elcom will continue under the FEI-NY segment. For more information regarding the Company’s restructuring, see Note 1 to the Consolidated Financial Statements. The products manufactured by the FEI-NY segment are precision time and frequency products, and more recently, quantum sensing products ,principally marketed to the commercial and U.S. Government satellite markets, to other U.S. Department of War (“DOW”) customers and to wireless communications network providers. Quantum sensors include magnetic sensors (magnetometers), and Rydberg sensors (compact receiving antennae), which utilize the same basic physics phenomena as atomic clocks. Because FEI-NY has manufactured atomic clocks for decades, the quantum sensor market represents a new growing market which utilizes the underlying technology behind atomic clocks, and is a natural arena for FEI to compete in. The FEI-Zyfer segment, which operates out of California, designs and manufactures products that incorporate GPS technologies and high-precision clocks designed and manufactured at FEI. FEI-Zyfer sells its products to both commercial and U.S. Government customers and collaborates with FEI on joint product development activities.

During fiscal years 2026 and 2025, approximately 72% and 76%, respectively, of the Company’s consolidated revenues were from products sold by the FEI-NY segment. In fiscal years 2026 and 2025, sales for the FEI-Zyfer segment were 34% and 27%, respectively, of the Company’s consolidated revenues. (The sum of annual sales percentages exceeds 100% due to intersegment sales.)

Consolidated revenues include sales to end-users in countries located outside of the U.S., primarily in Europe and Asia. During fiscal years 2026 and 2025, foreign sales comprised 9% and 6%, respectively, of the Company’s consolidated revenues. For segment information, see Note 13 to the Consolidated Financial Statements.

The Company’s sales on U.S. Government programs for both space and non-space applications are generally made under fixed price or cost-plus contracts either directly with U.S. Government agencies or indirectly through subcontracts intended for U.S. Government end-use.

For fixed-price contracts, the price paid to the Company is not subject to adjustment by reason of costs incurred by the Company in the performance of the contract, except for costs incurred due to contract changes ordered by the customer. These contracts are negotiated on terms under which the Company bears the risk of cost overruns and derives the benefit from cost savings. Cost-plus contracts reimburse the Company for the actual costs incurred in performance of the contract requirements.

As indicated above, many of the programs and platforms for which the Company supplies products and systems are used by the U.S. Government for maintaining secure communications world-wide, for obtaining vital intelligence and for enabling precision targeting capabilities. The Company’s products are also used in classified projects for the U.S. Government. It is the belief of management that the future success of the mission of the U.S. military and intelligence community is dependent on successful and timely deployment of these systems. Thus, the Company anticipates that adequate funds will be provided by the U.S. Government to ensure that the programs are completed. However, the Company’s experience indicates that programs and/or product sales can be delayed or canceled due to variations associated with periodic U.S. Government appropriations cycles and shifting priorities. If the U.S. Government canceled or delayed, even temporarily, programs and/or purchases involving Company products, the Company’s business could suffer a material adverse effect.

Negotiations on U.S. Government contracts are sometimes based in part on Certificates of Current Costs. An inaccuracy in such certificates may entitle the U.S. Government to an appropriate recovery. The Company’s accounts with respect to these contracts are subject to audit by the Defense Contract Audit Agency (“DCAA”). The Company’s last full incurred cost audit was performed in 2008. Additionally, the Company had successfully completed an accounting system audit in 2018 and 2023. The Company is required to submit, for subsequent review, an Incurred Cost Report by October 31, for each year then ended. All such required reports have been filed with no adverse comments to date.

Frequency Electronics has a DCAA audited and approved accounting system, which enables the Company to enter into contracts directly with U.S. Government agencies that require government certified accounting systems.

Government end-use contracts are subject to termination by the purchaser for convenience or default, as well as various other Federal Acquisition Regulations provisions. In the event of a termination for convenience, the Company is entitled to receive compensation as provided under the specific terms of such contracts. There were two government end-use contracts terminated during the fiscal year ended April 30, 2026.

FEI-NY Segment:

FEI-NY provides precision time, frequency generation and synchronization products and subsystems that are found on-board satellites, in ground-based communication systems and imbedded in mobile platforms operated by the U.S. military. FEI-NY has made a substantial investment in research and development (“R&D”) to apply its core technologies to satellite payloads, non-space DOW programs and commercial and industrial markets. Revenues from satellite payloads, both for commercial and U.S. Government applications, have become FEI-NY’s largest business area while the portion of commercial network infrastructure sales has declined relatively. FEI-NY expects to continue to generate substantial revenues from deployment of new and replacement satellites and other U.S. Government/DOW applications including sales of ruggedized subsystems for mobile U.S. military platforms.

Satellite Payloads

The use of satellites launched for communications, navigation, weather forecasting, video and data transmissions and Internet access has expanded the need to transmit increasing amounts of voice, video, and data to earth-based receivers. This requires more precise timing and frequency control at the satellite. The Company manufactures the master timing systems (quartz, rubidium) and other significant timing and frequency generation products for navigation, communication and intelligence collection satellites, and many of the Company’s other space assemblies are used onboard spacecraft for command, control and power distribution. Efficient and reliable DC-DC power converters are also manufactured for the Company’s own assemblies and as stand-alone products for space applications. The Company’s oven-controlled quartz crystal oscillators are cost-effective precision frequency sources suited for high-end performance required in satellite communications, airborne and terrestrial datalinks and geophysical survey positioning systems. Commercial satellite programs that utilize the Company’s space-qualified products include Iridium NEXT Constellation, Intelsat EPIC, O3B, WAAS, MexSat, MSV, ICO, TerreStar, EchoStar, Inmarsat and others. The Company is also pursuing core product opportunities for planned satellite constellations that will operate in Low- or Medium-Earth Orbits.

In the years ahead, the Company expects that the DOW will require more secure communication capabilities, more assets in space and greater bandwidth. The Global Positioning Satellite System, the MILSTAR Satellite System and the AEHF Satellite System are examples of the programs in which the Company has participated or plans to participate and which management believes are important to the success of the U.S. Government’s communication, intelligence and Precision Navigation and Timing (“PNT”) needs. It is likely that the DOW will move to adopt smaller and less expensive satellites for LEO applications, which the Company anticipates will necessitate the adaptation of the Company’s products or development of new products to better suit this type of satellite architecture. The Company previously manufactured the master clock for the Trident missile, the basic timing system for the Voyager I and Voyager II deep space exploratory missions and the quartz timing system for the Space Shuttle. The Company’s product offerings for U.S. Government satellite programs are similar in design and function to those used on commercial satellites, as described above.

U.S. Government- Non-space

In addition to space-based programs, the Company’s proprietary products are used in airborne and ground-based guidance, navigation, communications, radar, sonar and electronic countermeasures and timing systems. The Company has developed and patented a low acceleration-sensitive technology which offers an approximate 100 times improvement in performance under shock, vibration and other environmental effects as compared to other devices. Products are built in accordance with DOW standards and are in use on many of the U.S. Government’s important military applications. The Company anticipates that the U.S. government will provide adequate funds to sustain these programs.

Until April 30, 2026, FEI-Elcom addressed RF microwave modules and subsystems up to 60 GHz including fast switching, ultra-low phase noise synthesizers, up-down converters, receivers, tuners, ceramic resonance oscillators and dielectric resonance oscillators.

FEI-Zyfer Segment:

FEI-Zyfer designs, develops and manufactures products that provide PNT, primarily incorporating Global Navigation Satellite System(s) technology. FEI-Zyfer’s products make use of both “in-the-clear” civil and “crypto-secured” military signals for GPS. FEI-Zyfer’s products are integrated into radar systems, airborne SIGINT/COMINT platforms, information networks, test equipment, military command and control terminals, and satellite ground stations. FEI-Zyfer’s products are an important extension of FEI’s core product line, specifically in secure PNT for Command, Control, Communications, Computers, Combat Systems, Intelligence, Surveillance, and Reconnaissance (C5ISR). Recently identified threats to the communication capabilities of U.S. Government and to the public and enterprise networks through jamming, multi-path or “spoofing” GPS signals may be mitigated by FEI-Zyfer’s technologies and products. High precision, ruggedized clocks combined with specialized software are essential for the security of government communication and systems. More than 95% of FEI-Zyfer’s revenues are derived from sales where the end user is the U.S. Government.

BACKLOG

As of April 30, 2026, the Company’s consolidated backlog amounted to approximately $111 million compared to $70 million, at the end of the prior fiscal year. Approximately 73% of the current backlog is expected to be filled during the Company’s fiscal year ending April 30, 2027. As of April 30, 2026, there were no amounts included in backlog under cost-plus or fixed-fee contracts that had not been funded. The Company excludes from backlog those contracts or awards for which it has not received authorization to proceed. The Company expects any partially funded contracts to become fully funded over time and will add the additional funding to its backlog at that time. The backlog is subject to change for various reasons, including possible cancellation of orders, change orders, change in contract terms and other factors beyond the Company’s control. Accordingly, the backlog is not necessarily indicative of the revenues or profits (losses) which may be realized when the results of such contracts are reported.

CUSTOMERS AND SUPPLIERS

The Company’s products are sold to both commercial and governmental customers. For the years ended April 30, 2026 and 2025, approximately 91% and 94%, respectively, of the Company’s sales were made under contracts to the U.S. Government or subcontracts for U.S. Government end-use.

During fiscal year 2026, Lockheed Martin Corporation (“Lockheed Martin”), L3Harris Technologies, Inc. (“L3Harris”), and The Boeing Company (“Boeing”) each accounted for more than 10% of the Company’s consolidated revenues.

During fiscal year 2025, Northrop Grumman Company (“Northrop Grumman”) accounted for more than 10% of the Company’s consolidated revenues.

The loss by the Company of any one of these customers could have a material adverse effect on the Company’s business. The Company believes its relationship with these companies is mutually satisfactory. Additionally, the Company is not aware of any prospect for the cancellation or significant reduction of any of its commercial or existing U.S. Government contracts; however, the cancellation or significant reduction of the Company’s commercial or existing U.S. Government contracts could have a material adverse effect on the Company’s business.

The Company purchases a variety of electrical and other components and materials for use in the manufacture of its products. The Company is not dependent upon any one supplier or source of supply for any of its materials and maintains alternative sources of supply for all of its purchases. The Company has found its suppliers to be generally reliable and price-competitive; however, recent quotes for various parts and materials reflect longer delivery schedules and price increases. Where supply chain issues have been encountered, the Company has responded by changing the source of supply or redesigning products and replacing unavailable parts and materials with alternates wherever possible. FEI-NY is dependent on a limited number of suppliers for space qualified parts. If these suppliers were unable to deliver in reasonable time frames, then the prompt qualification of alternate suppliers may not be feasible or cost effective. Consequently, the Company could experience delays in delivery of its end products or costs in excess of what was originally quoted.

RESEARCH AND DEVELOPMENT

The Company’s technological leadership continues to be an essential factor as it pursues future growth in revenues and earnings. The Company has focused its internal R&D efforts on improving the core physics and electronic performance in its time and frequency products, conducting research to develop new time and frequency technologies and capabilities, improving product manufacturability by seeking to reduce its production costs through product redesign and process improvements and other measures to take advantage of lower cost components.

The Company continues to focus a significant portion of its own resources and efforts on developing hardware for satellites (commercial and U.S. Government) and terrestrial commercial communications systems, including wireless and GPS-related systems. During fiscal years 2026 and 2025, the Company expended $6.1 million on such R&D activity in both years. See Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations. Additionally, the Company receives customer funding for specific R&D projects and anticipates additional funding from customers for future R&D initiatives. Although funding is obtained from customers, the Company retains the rights to any products developed. During fiscal years 2026 and 2025, some of the Company’s development resources were applied to the design-stage of fixed-price satellite payload sub-system programs. For fiscal year 2027, the resources to be allocated to R&D will depend on market conditions and identification of new opportunities, as was the case in fiscal year 2026.

PATENTS AND LICENSES

The Company believes that its business is generally not dependent on patent or license protection. Rather, it is primarily dependent upon the Company’s technical competence, the quality of its products and its prompt and responsible contract performance. However, employees working for the Company assign all rights to inventions to the Company, and the Company presently holds such patents and licenses. In certain limited circumstances, the U.S. Government may use or permit the use by the Company’s competitors of certain patents or licenses the government has funded. During fiscal year 2003, the Company received a broad and significant patent for proprietary quartz oscillator technology which the Company has incorporated into its legacy designs, and which it will incorporate into future designs, to exploit in both legacy and new applications. In 2006, the Company obtained a basic patent for its low g-sensitivity technology which management believes will permit greatly enhanced performance of devices on moving platforms and under externally imposed shock or vibration. The Company’s current patents run through 2026.

COMPETITION

The Company experiences competition in all areas of its business. Many of the Company’s competitors are larger, have greater financial resources and have larger R&D and marketing staffs. The Company has a strong history of competing successfully in this environment due to the quality, reliability and outstanding record of performance its products have achieved. The Company competes primarily on the basis of the accuracy, performance and reliability of its products, the ability of its products to function under severe conditions, such as in space or in other extremely hostile environments, and the Company’s track record of prompt and responsive contract performance and technical competence. The Company has unique and broad capabilities which include quartz and rubidium-based timing references and specialized RF microwave technology. With respect to very high precision products, the Company encounters fewer competitors than it does for lower precision products for which there are a significant number of suppliers.

The Company’s principal competition for space products is the in-house capability of its major customers such as Boeing, Northrop Grumman and Lockheed Martin, as well as a number of other firms capable of providing high-reliability microwave frequency generators. With respect to non-space products, such as systems for precision time for terrestrial secure communication and command and control, and products for multiple applications in the EW market, the Company competes with larger domestic companies such as Microchip Technology Incorporated and Mercury Systems, Inc.

The Company believes its ability to obtain raw materials, manufacture finished products, integrate them into systems and sub-systems and interface these systems with highly sophisticated end-user applications provides a strong competitive edge.

EMPLOYEES

Due to the specialized nature of our business, our performance depends on identifying, attracting, developing, motivating, and retaining a highly skilled workforce in multiple areas, including engineering, science, manufacturing, information technology, cybersecurity and business development. The Company develops its workforce using a broad-based recruiting process to select talented individuals and by offering competitive compensation and benefits.

The Company currently employs 242 employees (232 full-time and 10 part-time), 99% based in the U.S. No employees are represented by labor unions. We believe our relationships with our employees are favorable as reflected in our high retention rates.

See “Risk Factors” for further discussion regarding risks related to our workforce and employee relations.

OTHER ASPECTS

The Company’s business is not seasonal although it expects to experience some fluctuation in revenues during the second fiscal quarter as a result of summer holiday periods.

INFORMATION ABOUT OUR EXECUTIVE OFFICERS

The executive officers hold office until the annual meeting of the Board of Directors following the annual meeting of stockholders, subject to earlier removal by the Board of Directors.

The names of all executive officers of the Company and all positions and offices with the Company that they presently hold are as follows:

Thomas McClelland, age 71, joined the Company as an engineer in 1984 and was elected Vice President, Commercial Products in March 1999. In fiscal year 2011, Dr. McClelland’s title was modified to Vice President, Advanced Development to describe his expanded role in the Company. In January 2020, Dr. McClelland’s title was modified to Senior Vice President and Chief Scientist. In July 2022, Dr. McClelland was appointed the Company’s Interim President and Chief Executive Officer, in addition to his existing positions and responsibilities with the Company, following the resignation of the Company’s former President and Chief Executive Officer. On January 17, 2023, Dr. McClelland was appointed the Company’s President and Chief Executive Officer.

Oleandro Mancini, age 77, joined the Company in August 2000 as Vice President, Business Development and was promoted to Senior Vice President in 2010. Prior to joining the Company, Mr. Mancini served from 1998 to 2000 as Vice President, Sales and Marketing at Satellite Transmission Systems, Inc. and from 1995 to 1998 as Vice President, Business Development at Cardion, Inc., a Siemens A.G. company. From 1987 to 1995, he held the position of Vice President, Engineering at Cardion, Inc.

Steven L. Bernstein, age 61, joined the Company in April 2010 as its Controller and was appointed to the position of Chief Financial Officer in April 2016. In January 2019, Mr. Bernstein was also appointed as Secretary and Treasurer of the Company, in addition to his role as Chief Financial Officer. Prior to joining the Company, Mr. Bernstein worked in the North America accounting group of Arrow Electronics, a Fortune 500 electronics distributor.

Item 1A. Risk Factors

Risks Related to Business Operations and Our Industry

We rely heavily on U.S. Government programs for a substantial portion of our business. Accordingly, changes in U.S. Government priorities or delays or reductions in spending by the U.S. Government on such programs could have a material adverse effect on our business, financial position, results of operations and/or cash flows.

Either as a prime contractor or as a subcontractor, we rely heavily on U.S. Government programs, from which we derived approximately 91% and 94% of our sales in fiscal year 2026 and fiscal year 2025, respectively. These U.S Government programs may be only partially or incrementally funded and are subject to potential termination. These programs may also be subject to funding reductions and/or delays due to changes in government priorities or other factors. Whether direct contracts with the U.S. Government or contracts with prime contractors to the U.S. Government, our contracts typically are funded at a level less than the full contract value and require periodic incremental additional funding in order to continue. Should circumstances change regarding funding and sufficient funding become unavailable, contracts may be terminated, delayed significantly or put on stop work status.

U.S. Government contracts are subject to Congressional funding, which may be unavailable due to changes in priorities or subject to continuing resolution, which may result in funding reductions, eliminations or other effects that could impact our business. Furthermore, budget uncertainty, the risk of future budget cuts, the potential for U.S. Government shutdowns, and the federal debt ceiling could also adversely affect our industry and the funding for our current and future contracts. If appropriations are delayed or a government shutdown was to occur and was to continue for an extended period of time, we could be at risk of program or contract cancellations and other disruptions and nonpayment. Finally, shifting funding priorities or federal budget changes, could also result in reductions in overall spending on our contracts and projects, which could adversely impact our business, financial condition, results of operations and/or cash flows. Changes in funding priorities could reduce opportunities in existing programs and in future programs where we intend to compete. While we would expect to compete and be well positioned as the incumbent on existing programs, we may not be successful and, even if we are successful, the replacement programs may be funded at lower levels, which could adversely affect our business, financial position, results of operations and/or cash flows.

We depend heavily on a small number of larger customers for a substantial portion of our business. The loss of one or more of our largest customers or programs could have a material adverse effect on our business, financial position, results of operations and/or cash flows.

As a subcontractor, the Company is reliant on a few large customers that generally hold the ultimate contract with the U.S. Government. During fiscal year 2026, Lockheed Martin, L3Harris, and Boeing each accounted for more than 10% of the Company’s consolidated revenues. These customers typically incorporate our products into larger programs. If these customers encounter technical, financial or other issues unrelated to our products that affect the larger program’s operations, the related program may be terminated or require expensive, unanticipated revisions. These issues, although unrelated to our products, could adversely impact us if our customers’ contracts with the U.S. Government become subject to re-competition or are ultimately cancelled. Additionally, our larger customers are sophisticated corporations with large research and development staffs and budgets. If one or more sought to design and manufacture replacements for our products, they could potentially discontinue their need for our products. Alternatively, our larger customers could look to replace our products with the products of one or more of our competitors. The loss of the U.S. Government or one or more of our other larger customers or programs could adversely affect our business, financial position, results of operations and/or cash flows.

We use estimates when accounting for contracts. Changes in estimated contract revenues and/or changes in costs can affect our profitability and our overall financial position.

Contract accounting requires significant judgment by the Company’s management with respect to estimating contract revenues and costs and making assumptions for possible schedule and technical issues. These costs include planned costs for all phases of the contract and, if needed, costs for any technical issues that arise. Due to the nature and complexity of many of our contracts, the estimation of total revenues and costs at completion is subject to many variables and often difficult to predict accurately. As a result, it has, and could in the future, be possible that the Company’s estimates when accounting for contracts may prove to be materially incorrect.

The Company’s operating income can be adversely affected when estimated contract costs increase. Reasons for increased estimated contract costs include: design issues; changes in estimates of the nature and complexity of the work, including technical or quality issues or requests for additional work; production challenges, including those resulting from the timeliness of customer funding and the unavailability or reduced productivity of qualified labor; the availability, performance, and quality of significant subcontractors; supplier issues, including the costs, timeliness and availability of materials and components; changes in laws or regulations; actions necessary for long-term customer satisfaction; and natural disasters or other matters. We have filed, and may file, requests for equitable adjustment or claims to seek recovery in whole or in part for our increased costs and aim to protect against these risks through contract terms and conditions when practical, but the prime contractor or the U.S. Government may disagree with our requests or may not have funding to cover them.

Due to their nature, fixed price contracts inherently tend to have more financial risk than cost-type contracts, including as a result of inflationary pressures, labor shortages, and increased labor rates. In fiscal year 2026, 95% of our sales were derived from fixed-price contracts. While the Company’s management uses its best judgment to estimate costs associated with fixed-price contracts, future events may require adjustments, which could ultimately adversely affect the Company’s operating income.

Under cost-type contracts, allowable costs incurred by the contractor are generally subject to reimbursement plus a fee. These cost-type programs may have award or incentive fees that are uncertain and may be earned over extended periods or towards the end of the contract. In these cases, the associated financial risks are primarily in recognizing profit, which ultimately may not be earned, or program cancellation if cost, schedule, or technical performance issues arise.

Changes in underlying assumptions, circumstances or estimates, and the failure to prevail on related claims for equitable adjustments could have a material adverse effect on our business, financial position, results of operations and/or cash flows.

We face substantial competition in our industry, and if we fail to win future business or experience undue pricing pressures as a result of such competition, our business, financial position, results of operations and/or cash flows could be adversely affected.

We operate in a highly competitive industry focused on very high-performance products. Many of our competitors are larger, have greater financial resources and have larger R&D and marketing staffs. While we also maintain a robust internal R&D program that is intended to maintain our technical edge, the Company is limited in its resources and ultimately may not be able to successfully compete. Technology is advancing rapidly, and if we are unable to respond effectively to competition, we may lose existing customers, fail to win future business or experience undue pricing pressures that could affect our financial performance. Certain of our current technologies may become subject to significant future advancements, which may make our products obsolete or non-competitive. Competitors may be able to develop new manufacturing technologies that afford them cost and/or schedule advantages compared to our products. Customers may elect a less expensive product, even where it offers lower performance, compared to our current products. Specifically, the emergence of numerous LEO commercial satellite systems that have significantly lower requirements for life in orbit may result in new products based on commercial parts and processes not required for the high performance and/or longer lived geo-synchronous orbit satellites for which the Company has typically developed products. This may result in a migration to less capable, but less expensive products compared to what the Company has traditionally produced. This may result in reduced market share, lower revenues and adversely impact our business operations and financial conditions. Additionally, competitors may have the benefit of other contracts that enable them to produce in volume with a concomitant cost advantage that affords them a price advantage. Many of our customers have in-house capability to develop products comparable to ours and may opt to do so. Accordingly, if we are unable to continue to compete successfully against our current or future competitors, we may experience declines in future revenues and market share, which could have a material adverse effect on our business, financial position, results of operations and/or cash flows.

Our products, which are often incorporated into larger systems, are technologically complex and require state-of-the-art technology and manufacturing expertise. Any defect in the design, materials or workmanship with respect to our product could result in system failure.

Our products are technologically complex and require state-of-the-art technology and manufacturing expertise. If a defect in design, materials or workmanship is not identified prior to delivery, the defect can result in product failure and potentially the loss of mission capability for the systems into which our products are integrated. All satellites cannot be recovered from orbit to repair failed sub-systems, therefore failure of a Company product incorporated into a satellite may result in the complete loss of the satellite with a significant impact to the Company’s reputation and future business prospects. Penalties and possible litigation may result from these types of problems, with potential significant impact to our business, financial position, results of operations and/or cash flows.

We are dependent on numerous suppliers for various parts, materials, test services, facility operations and infrastructure. If these suppliers fail to perform or we are unable to procure or experience significant delays with respect to needed products, materials or services, our financial position, results of operations and/or cash flows could be materially adversely affected.

We are dependent on numerous suppliers for various parts, materials, test services, facility operations and infrastructure who may, in turn, be affected by factors such as raw material availability, skilled personnel shortages, pandemics, major weather events or natural disasters and other impacts that affect their ability to provide the goods and services we require. Disruptions or performance problems caused by our suppliers or failure to meet regulatory or contractual requirements, have had, and may continue to have, various adverse impacts on the Company, including our ability to meet our commitments to customers. The inability of our suppliers to perform adequately has resulted in and could in the future result in the need for us to transition to alternate suppliers if available, which could result in significant incremental cost and delay or the need for us to provide other resources to support our existing suppliers. The Company is reliant on suppliers who are space-qualified, limiting the ability to procure certain key materials, such as circuit boards, from other vendors. When these key suppliers experience quality issues, their products may have to be rejected, causing delays in our ability to complete projects on schedule and at projected costs. The time and cost associated with resolution of these issues may impact our financial performance. Consolidation of the industry can result in elimination of suppliers or discontinuation of certain product lines upon which we are reliant, necessitating lifetime buys of components or the need to redesign electronics to incorporate different components, having a negative effect on our financial position, results of operations and/or cash flows. Furthermore, latent supply chain quality issues may affect our product performance and reliability, which may damage our reputation and impact future business.

The success of our business and financial performance is dependent on our ability to identify, attract, train and retain a highly skilled workforce.

We rely on very unique skill sets in our employee population. Our average employee tenure is approximately 11 years and the median age is approximately 53. Our products rely on very experienced engineers, physicists and manufacturing personnel who are trained in-house and who acquire competence only after a lengthy period of time. Given the median age of our average employee, we anticipate that a number of our key personnel will retire in the coming years. If we are unable to attract, train and retain competent and skilled replacement employees, our ability to design, develop and manufacture our products will be adversely affected. Furthermore, our operating performance is also dependent upon personnel who hold security clearances and receive substantial training to work on certain programs or tasks. If we experience unanticipated attrition with respect to these employees, it will be difficult for us to replace them on a timely basis.

Adverse changes in global economic or geopolitical conditions may adversely affect business operations and financial condition.

Global economic and geopolitical conditions may adversely affect our business operations and financial condition. Turmoil in world financial markets may impact our supply chain resulting in unavailability of key components and materials, increasing costs due to delays, need to redesign certain electronics in order to mitigate shortages or schedule impacts and increasing costs to establish alternate qualified suppliers. These impacts may adversely affect our business due to customer cancellations, reduced demand for our products and increased costs, which could impact our financial condition. We are also subject to inflation and recessionary pressures. The current inflationary environment has and may continue to increase our cost of labor as well as our other operating costs. Likewise, deteriorating economic conditions could reduce the demand for our products, which could adversely affect our business operations and financial condition.

We face various risks related to health epidemics, pandemics and similar outbreaks, which may have material adverse effects on our business, financial position, results of operations and/or cash flows.

Health epidemics, pandemics and similar outbreaks create substantial risk to the Company. Employees work in close proximity to one another. Therefore, if an employee is infected with a communicable disease or suspected of being infected, other employees he or she has come in contact with may also be infected, with a cascading effect on the workforce. In addition to the time off to recover, there is a need to clean and disinfect the areas where the employee was working and had frequented in the facility. The nature of the Company’s business requires mostly “hands-on” activities related to design, manufacturing and testing. Therefore, absenteeism resulting from infectious diseases and cleaning procedures to disinfect various areas of our facilities can have a significant impact on a contract’s schedule, with a corresponding impact to costs. The Company is not able to predict possible future health epidemics, pandemics, or similar outbreaks, but if they manifest, they could have significant adverse effects on our business, financial position, results of operations and/or cash flows.

Our business could be adversely impacted by various external disruptions.

A natural disaster, terrorism, insider threat, workplace violence, civil unrest, damaging weather, fire, act of war, or similar acts or events could limit our access to our facilities or cause interruption in the supply of electricity, natural gas, or water or preclude delivery of various supplies or limit the movement of our workforce, which may have a significant adverse impact to our operations and financial performance. The nature of our business requires mostly “hands-on” activities at our facilities to design and manufacture our products. Additionally, our products undergo lengthy testing, and interruption of these tests for any reason can cause damage to the product and/or necessitate the need to repeat test cycles, with adverse cost and schedule impacts. Catastrophic effects that result in intrusion of damaging water or other contaminants may cause damage to sensitive capital equipment, inventory or facilities that could be material. Our ability to recover from these catastrophes may be limited. As a result, such disruptions could adversely impact our financial position, results of operations and/or cash flows.

Noncompliance with any of the covenants in the Company’s $10 million senior secured revolving credit facility (the “Credit Agreement”), which matures on June 12, 2029, could result in any debt outstanding thereunder becoming due, which could have a material adverse effect on its financial position, operations and liquidity.

The Credit Agreement contains customary restrictive covenants and financial covenants, including those related to total leverage and minimum fixed charge coverage, that, if violated, could restrict the Company’s operational and financial flexibility. Failure to comply with these covenants could result in an event of default. If any such event of default is not cured or waived, the lender could elect to declare any outstanding debt under the Credit Agreement at such time to be due and payable and could cease making further loans and institute foreclosure proceedings against the Company’s assets, all of which could have a material adverse effect on the Company’s financial position, operations and liquidity.

Risks Related to Legal, Regulatory and Compliance Matters

Our failure to comply with laws, regulations and/or terms we are subject to could adversely affect our business.

We operate in a highly regulated industry and are routinely audited and reviewed by the U.S. Government and its agencies. These agencies review performance under our contracts, our cost structure and accounting, and our compliance with applicable laws, regulations, terms and standards, as well as the adequacy of our systems in meeting government requirements. If an audit uncovers improper or illegal activities, we would be subject to possible civil and criminal penalties, sanctions, forfeiture of profits or suspension or debarment. Most of our contracts are subject to Federal Acquisition Regulations (FARs) or Defense Federal Acquisition Regulation Supplement (DFARS). Violation of any of these regulations can result in significant consequences, including fines, debarments or other punitive measures by the U.S. Government. Additionally, the Company has defense department security clearance that is required for performance on several contracts. Failure to maintain compliant security procedures may result in suspension of our security clearance and inability to perform on current contracts, as well as limit our ability to be awarded future contracts. The Company is also subject to export control requirements, anti-boycott regulations and Office of Foreign Assets Control (OFAC) sanctions against business dealings with certain persons and entities, including its investment in Morion, Inc., a less than wholly-owned subsidiary of state-owned Russian bank Gazprombank. For example, the U.S. Ukraine-related sanctions regime has since 2014 included a list of sectoral sanctions identifications (“SSI”) pursuant to Executive Order 13662, which prohibits certain transactions, including certain extensions of credit, with an entity designated as an SSI or certain affiliates of an entity designated as an SSI. On July 16, 2014, after the Company’s investment in Morion, Gazprombank was designated as an SSI. As previously disclosed, in light of Morion’s relationship with Gazprombank, in 2020, the Company evaluated, with the assistance of external legal counsel, certain sales to Morion and the timing of payments by Morion to the Company in connection with those sales to determine whether payments by Morion may have inadvertently constituted extensions of credit in violation of Directive 1 under Executive Order 13662. The Company determined that certain payments by Morion – the majority of which occurred more than five years ago – were not timely. Following the evaluation, on May 7, 2020, the Company voluntarily disclosed its findings to OFAC. The Company’s voluntary disclosure to OFAC related solely to delays in collection of accounts receivable that exceeded then-applicable payment windows set forth in sanctions regulations and did not relate to any other type of payment or transaction. On February 17, 2021, the Company received a Cautionary Letter from OFAC indicating that OFAC has completed its review of the matter. According to OFAC, the Cautionary Letter was issued instead of pursuing a civil monetary penalty or taking other enforcement action. On October 30, 2024, OFAC designated Morion as a Specially Designated National, resulting in the blocking of all Morion property and property interests and the termination of all commercial relationships between the Company and Morion. Although the Company’s prior voluntary disclosure to OFAC discussed above did not lead to any civil monetary penalty or other enforcement action and although the Company has terminated all commercial relationships with Morion following Morion’s designation as a Specially Designated National, the Company continues to hold a minority equity interest in Morion, and there can be no assurance that the Company’s historical or continuing relationship with Morion will not result in additional regulatory scrutiny or liability. Any future violation of any of the requirements, governmental regulations discussed above, including OFAC sanctions, or other similar laws, regulations, terms or standards could have a material adverse effect on our financial position, results of operations and/or cash flows.

We are subject to various investigations, claims, disputes, enforcement actions, litigation, and other legal proceedings that could ultimately be resolved against us.

We have and may in the future become subject to investigations, claims, disputes, enforcement actions and administrative, civil or criminal litigation, arbitration or other legal proceedings across a broad array of matters, including government contracts, commercial transactions, false claims, false statements, compliance with government orders, mischarging, contract performance, fraud, procurement integrity, securities laws and requirements, products liability, warranties, hazardous materials, personal injury claims, environmental, stockholder derivative actions, acquisitions and divestitures, intellectual property, tax, corporate law and obligations, employment, export/import, anti-corruption, debt and equity, labor, health and safety, accidents, and employee benefits and plans, including plan administration, improper payments and issues related to privacy and security (cyber and physical). These matters can divert financial and management resources; result in administrative, civil or criminal fines, penalties or other sanctions (including judgments, convictions, consent or other voluntary decrees or agreements), compensatory, treble or other damages, non-monetary relief or other liabilities; and otherwise harm our business and our ability to obtain and retain new business. Certain allegations against us can lead to suspension or debarment from government contracts. A suspension or debarment could have a material adverse effect on the Company because of our reliance on U.S. Government contracts. Additionally, an investigation, claim, dispute, enforcement action or litigation, even if pending or not ultimately substantiated or if fully indemnified or insured, can also negatively impact our reputation among our customers, and make it substantially more difficult for us to compete effectively for business in the future. Accordingly, investigations, claims, disputes, enforcement actions, litigation or other legal proceedings could have a material adverse effect on our financial position, results of operations and/or cash flows.

Risks Related to Information Technology and Intellectual Property

Our business could be adversely impacted by significant cybersecurity attacks.

As a U.S. Government defense industry contractor, the Company has experienced cybersecurity attacks in the past and may be subjected to significant cybersecurity attacks in the future in an effort to, among other things, steal intellectual property, disrupt operations, embed ransomware or initiate insider attacks. Although we implement various measures and controls to monitor and mitigate risks associated with these threats and to increase the cyber resiliency of our infrastructure and products, there can be no assurance that these processes will be sufficient. Our inability to defend effectively against cyberattacks may result in disruption of operations, loss of significant intellectual property, compromise of employee’s personal information or violation of government contractor requirements for information security. These could result in reputational damage, fines, litigation, operational impacts or significant costs for mitigation and/or recovery, all with adverse consequences to our financial position, results of operations and/or cash flows.

Claims by third parties that our products infringe their intellectual property could result in costly disputes and/or require us to develop alternate designs.

We may become subject to claims for infringement of intellectual property, which could result in litigation costs or require us to incur costs for developing alternate designs that may require extensive testing and qualification to meet contract obligations. This could result in adverse consequences to our financial position, results of operations and/or cash flows.

Risks Related to Our Common Stock

Our stock price may continue to be volatile.

The trading price of our common stock has been, and may continue to be volatile and subject to wide fluctuations in response to various factors, many of which we cannot control. As a result, investors in our common stock may experience substantial losses. This volatility may or may not be related to our operating performance. Our operating results, from time to time, may be below the expectations of public market analysts and investors, which could have a material adverse effect on the market price of our common stock.

If significant existing stockholders sell large numbers of shares of our common stock, our common stock price could decline.

Approximately 38.5% of our outstanding common stock is held by 5 individuals or entities. The market price of our common stock could decline if a large number of our shares of outstanding common stock are sold in the public market by our existing stockholders or as a result of the perception that such sales could occur.

Item 1B. Unresolved Staff Comments

Not Applicable.

Item 1C. Cybersecurity

Risk Management and Strategy

Governance

Our Chief Information Officer (CIO) leads our cybersecurity program and reports directly to our Chief Executive Officer. Our CIO is supported by our internal IT team that assists our CIO in the day-to-day management of the cybersecurity program, including the cybersecurity incident response plan, training initiatives and third-party assessments. Our CIO has over two decades of experience in various cybersecurity functions, including implementing stringent cybersecurity measures to protect sensitive information and meet established security standards, extensive work in IT governance and operations, network intrusion and critical systems protection, Enterprise Resource Planning (ERP) systems, and data analytics. He has a B.S. in Computer Information Systems, and additional training in Risk Management Framework 2, COMSEC, and APICS.

Item 2. Properties

The Company operates out of several facilities located around the U.S. Each facility is used for manufacturing its products and for administrative activities. The following table presents the location, size and terms of ownership/occupation:

The Company’s facility located in Mitchel Field, Long Island, New York, is part of the building that the Company constructed in 1981 and expanded in 1988 on land leased from Nassau County. In January 1998, the Company sold the building and the related land lease to Reckson Associates Realty Corp. (“Reckson”), leasing back the space that it presently occupies.

The Company leases its manufacturing and office space from RA 55 CLB LLC (as successor-in-interest to Reckson). The lease expires on September 30, 2029. Pursuant to the lease agreement, the Company pays a gradually increasing annual rent of $1,046,810 in 2019 to $1,276,056 in 2029. The Company believes the leased space is adequate to meet the Company’s domestic operational needs which encompass the principal operations of the FEI-NY segment and also serves as the Company’s corporate headquarters.

The Garden Grove, California facility is leased by the Company’s subsidiary, FEI-Zyfer. The facility consists of a combination office and test/assembly areas. The Company signed a third amendment to the lease, which expanded the square footage rented, and extended the lease an additional 62 months, beginning February 1, 2025 and expiring March 30, 2030. The average annual rent over the period of the amendment is approximately $672,000. The Company believes the leased space is adequate to meet FEI-Zyfer’s operational needs.

FEI-Elcom entered into a new lease agreement on January 12, 2022 regarding its Northvale, New Jersey facility. The facility consists of a combination office and manufacturing space. The Company signed a third amendment to the lease, which extended the lease an additional 36 months beginning February 1, 2022 and expiring January 31, 2025, and reduced the square footage rented. Until a new lease is signed, the Company will make monthly payments of $13,491; all other terms and conditions of the previous lease shall remain in full force and effect. As of April 30, 2026, the Company has not signed a fourth amendment to the lease with the landlord, however, the Company continues to utilize the space for FEI-Elcom’s operational needs.

The Boulder, Colorado facility is leased by the Company and is used as a satellite facility for the FEI-NY segment. The facility consists of a combination office and test/assembly areas. The Company signed the lease for a period of 62 months, beginning August 1, 2025 and expiring September 30, 2030. The average annual rent over the period of the lease is approximately $71,100. The Company believes the leased space is adequate to meet operational needs.

Item 3. Legal Proceedings

From time to time, the Company may become a defendant in litigation arising out of the ordinary course of business. As of July 16, 2026, the Company was not party to any material pending legal proceedings.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

The common stock of the Company is listed on The Nasdaq Global Market (“NASDAQ”) under the ticker symbol “FEIM.” As of July 8, 2026, the approximate number of holders of record of common stock was 613.

DIVIDEND POLICY

No dividends were declared or paid during fiscal year 2026. In the past, we have declared special dividends from time to time; however, any future determinations as to the declaration of dividends on our common stock will be made at the discretion of the Board of Directors and will depend on our earnings, operating and financial conditions, capital requirements, Credit Agreement restrictions, and other factors deemed relevant by the Board of Directors.

The Credit Agreement currently restricts our ability to declare and pay dividends on our common stock if certain total leverage and minimum fixed charge coverage covenants are not met, and our ability to declare and pay dividends on our common stock may further be restricted by the provisions of other financing documents that we may enter into in the future or the terms of securities that we may issue from time to time.

PURCHASES OF EQUITY SECURITIES

There were no sales of unregistered equity securities during the quarter ended April 30, 2026.

The following table presents the share-repurchase activity for the quarter ended April 30, 2026:

Item 6. [Reserved]

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

“Safe Harbor” Statement under the Private Securities Litigation Reform Act of 1995:

The statements in this Annual Report on Form 10-K regarding future earnings and operations and other statements relating to the future constitute “forward-looking” statements pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995.  Forward-looking statements inherently involve risks and uncertainties that could cause actual results to differ materially from the forward-looking statements.  Factors that would cause or contribute to such differences include, but are not limited to, the risks associated with reliance on key customers, including the U.S. government, the Company’s use of estimates when accounting for contracts, actions by significant customers or competitors, competitive factors, new products and technological changes, continued acceptance of the Company’s products in the marketplace, dependence upon third-party vendors, product prices and raw material costs, the Company’s ability to attract and retain key employees, general domestic and international economic conditions, health epidemics and pandemics, external disruptions to the Company’s facilities or supply chain, the Company’s operations in a highly regulated industry, the outcome of any litigation and arbitration proceedings, cybersecurity attacks, noncompliance with any of the covenants in the Credit Agreement, volatility in the Company’s stock price, including due to the relatively low trading volume of its common stock, and failure to maintain an effective system of internal controls over financial reporting. The factors listed above are not exhaustive. Other sections of this Form 10-K include additional factors that could materially and adversely impact the Company’s business, financial condition and results of operations.  Moreover, the Company operates in a very competitive and rapidly changing environment.  New factors emerge from time to time and it is not possible for management to predict the impact of all these factors on the Company’s business, financial condition or results of operations or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements.  Given these risks and uncertainties, investors should not rely on forward-looking statements as a prediction of actual results.  Any or all of the forward-looking statements contained in this Form 10-K and any other public statement made by the Company or its management may turn out to be incorrect.  The Company expressly disclaims any obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

Critical Accounting Estimates

The Company’s significant accounting policies are described in Note 1 to the Consolidated Financial Statements. The Company believes its most critical accounting policies to be the recognition of revenue and costs on production contracts, income taxes and the valuation of inventories. Each of these areas requires the Company to make use of reasonable estimates, including estimating the cost to complete a contract, the realizable value of its inventories or the market value of its products. Changes in estimates can have a material impact on the Company’s financial position and results of operations.

Revenue Recognition

Revenues for most contracts are reported in operating results over time using the cost-to-cost method. Under this method, revenue is recorded based upon the ratio that incurred costs bear to total estimated contract costs with related cost of revenues recorded as the costs are incurred. Each month management reviews estimated contract costs through a process of aggregating actual costs incurred and estimating additional costs to completion based upon the current available information regarding labor, outside services, materials, overhead costs and status of the contract. The effect of any change in the estimated gross margin rate for a contract is reflected in revenues in the period in which the change is known. Provisions for the full amount of anticipated losses on contracts are made in the period in which they become determinable.

Significant judgment is used in evaluating the financial information for certain contracts to determine an appropriate budget and estimated cost. The Company evaluates this information continuously and bases its judgments on historical experience, design specifications, and expected costs for material and labor.

Income Taxes

On July 4, 2025, President Trump signed H.R.1, the One Big Beautiful Bill Act (“OBBBA”) into law. In accordance with U.S. GAAP, the Company accounted for the tax effects of changes in tax law in the period of enactment during the first quarter of fiscal year 2026. The OBBBA made changes to the U.S. tax code, including, but not limited to: (1) allowing taxpayers to fully deduct domestic research expenditures for tax years beginning after December 31, 2024, (2) provides a catch-up relief provision for taxpayers to accelerate deductions for unamortized domestic research expenditures, (3) provides a permanent provision for 100% bonus depreciation deductions for most tangible personal property with a recovery period of 20 years or less, acquired and placed in service after January 19, 2025, and (4) for tax years beginning after December 31, 2024, restores Adjusted Taxable Income by adding back amortization and depreciation to calculate the limitation on interest deductions (effectively returning to EBITDA). The enactment of the OBBBA did not have a material impact on our provision or effective tax rate as of April 30, 2026. We continue to evaluate the OBBBA and its requirements, as well as its application to our business and its impact on cash taxes and our effective tax rate.

Our income tax expense, deferred tax asset and liabilities, and liabilities for unrecognized tax benefits reflect management’s best estimate of current and future taxes to be paid. Significant judgments and estimates are required in the determination of the consolidated income tax expense.

Deferred income taxes arise from temporary differences between the tax basis of assets and liabilities and their reported amounts in the financial statements, which will result in taxable or deductible amounts in the future. Accounting for income taxes requires that a valuation allowance be established when it is more likely than not that all or a portion of the deferred tax assets will not be realized. In evaluating our ability to recover deferred tax assets in the jurisdiction from which they arise, we consider all positive and negative evidence, including the reversal of deferred tax liabilities, projected future taxable income, tax planning strategies, and results of recent operations. In circumstances where there is sufficient negative evidence indicating that the deferred tax assets will not be realizable, we establish a valuation allowance.

The Company maintains a valuation allowance of approximately $1.4 million against certain deferred tax assets including state tax credits and capital loss carryforwards because the realization of these tax attributes requires sufficient taxable income be sourced to the respective state jurisdiction and capital gain income is required to utilize capital losses. The Company will continue to evaluate the realizability of its deferred tax assets quarterly. Any further increases or decreases in the valuation allowance could have an unfavorable or favorable impact on the Company’s income tax provision and net income in the period in which such determination is made. As of April 30, 2026, the deferred tax asset is recorded at its more-likely-than-not realizable amount.

Tax benefits are recognized for an uncertain tax position when, in the Company’s judgment, it is more likely than not that the position will be sustained upon examination by a taxing authority. For a tax position that meets the more-likely-than-not recognition threshold, the tax benefit is measured as the largest amount that is judged to have a greater than 50% likelihood of being realized upon ultimate settlement with a taxing authority. The liability associated with unrecognized tax benefits is adjusted periodically due to changing circumstances and when new information becomes available. Such adjustments are recognized entirely in the period in which they are identified. The effective tax rate includes the net impact of changes in the liability for unrecognized tax benefits and subsequent adjustments as considered appropriate by the Company. While it is often difficult to predict the final outcome or the timing of resolution of any particular tax matter, the Company believes its liability for unrecognized tax benefits is adequate.

RESULTS OF OPERATIONS

Consolidated Results

The table below sets forth for the fiscal years ended April 30, 2026 and 2025, the percentage of consolidated net sales represented by certain items in the Company’s consolidated statements of operations:

Revenues

For the fiscal year ended April 30, 2026 revenue decreased by approximately $6.6 million, or 9%, compared to the prior fiscal year. Fiscal 2026 was a year of digestion from a revenue standpoint, as the Company pulled forward some revenue into last year’s Fiscal 2025. As a result of the shutdown of the FEI-Elcom manufacturing business, the Company sacrificed some near-term revenue in the fourth quarter. By doing so, the Company believes it is the right long-term decision to better align its capital and growth potential as it focuses on the much larger addressable markets it is starting to sell into: alternative position, navigation and timing (ALT-PNT) solutions; quantum sensing, including magnetometers; space defense and exploration; and, proliferated satellite programs.

Satellite program revenues for Government end-use were 31% and 53% of total revenues for fiscal years 2026 and 2025, respectively. Satellite program revenues for commercial end-use were 6% of total revenue for both fiscal years 2026 and 2025.

Revenues on satellite program contracts are recorded in the FEI-NY segment and are recognized primarily under the percentage-of-completion (“POC”) method. Revenues from non-space U.S. Government/DOW customers increased by approximately $11.5 million, or 43.2%, in fiscal year 2026 compared to fiscal year 2025. These revenues are recorded in both the FEI-NY and FEI-Zyfer segments and accounted for approximately 60% and 38% of consolidated revenues for fiscal years 2026 and 2025, respectively. Other commercial and industrial sales accounted for approximately 3% of consolidated revenues for both fiscal years 2026 and 2025. Sales in the other commercial and industrial sales area were $2.1 million and $2.4 million for the fiscal year ended April 30, 2026 and the fiscal year ended April 30, 2025, respectively.

Gross Profit

For the fiscal year ended April 30, 2026, the gross profit and gross profit percentage decreased as a result of several factors. The Company invested significantly in the business during Fiscal 2026 in order to better prepare for the anticipated strong growth ahead. The majority of this investment was focused on hiring engineering talent in advance of the large ramp-up in production and revenue that is expected, based in part on the historically high existing backlog. This had near-term dampening effects on gross margin, as engineering costs flowed through the manufacturing overhead portion of our cost of revenues, raising this expense before the generation of revenue. Another meaningful investment was a business process improvement investment, which should allow the Company to improve turnaround time; these expenses flowed through overhead and had a similar impact on gross margins. With the orders and demand coming in, the Company believes it is a prudent long-term decision to be ready for that business and to super-serve customers, who increasingly want more work done more quickly. Additionally, the Company has increased the internal focus on the largest and most profitable market opportunities, and de-emphasized or discontinued products with lower growth potential and lower margin profiles that have historically been part of the business. Specifically, the Company chose to restructure FEI-Elcom effective April 30, 2026. The Company believes FEI-Elcom did not have the growth or margin potential of the Company’s core space and defense markets, nor those of the much larger addressable markets the Company is starting to sell into: alternative position, navigation and timing (ALT-PNT) solutions; quantum sensing, including magnetometers and Rydberg sensors; space defense and exploration; and, proliferated satellite programs. The FEI-Elcom restructuring included a $3.8 million inventory write-down, a non-cash charge which flowed through cost of revenues further depressed gross margins for this reported period, but which, we believe is not reflective of ongoing business trends. The Company had several non-recurring charges that flowed through operating expenses this quarter, the majority of which was a non-cash charge for an accrual related to a one-time change in employee sick/paid-time-off policies. Most of this charge flowed through cost of revenues, impacting gross margins, and the balance flowed through selling and administrative expenses.

Selling and Administrative Expenses

In fiscal years ended April 30, 2026 and 2025, selling and administrative expenses (“SG&A”) were 24% and 18% of consolidated revenues, respectively. Both SG&A expenses in total and as a percentage of revenue increased in fiscal year 2026, as compared to the prior fiscal year. As mentioned above, there were also significant investments in the future and one-time charges that were included in SG&A. The largest and most important is the opening of the Colorado facility and all the associated costs. The Company believes this facility will be a key contributor to the future growth of the Company. Additional expenses were recorded for the restructuring of FEI-Elcom. The majority of the remaining increase was non-recuring charges related to a change in sick/paid-time off policies and legal expenses related to the various items the Company has instituted for the future growth of the Company. Going forward, the Company expects to demonstrate operating leverage on its SG&A expenses as revenue increases.

Research and Development Expenses

As a percentage of consolidated revenue, R&D expense for the fiscal years ended April 30, 2026 and 2025 were 10% and 9%, respectively. The Company funded R&D as a percentage of consolidated revenue was slightly higher in fiscal year 2026 as compared to the previous fiscal year, partially because the previous fiscal year R&D expenditures were lower than planned and some of the expenses were subsequently captured in fiscal year 2026. The increase in R&D expense as a percentage of consolidated revenue, also reflects the Company’s commitment to maintaining its technical excellence. The Company expects future R&D investment to be in line with, or even potentially above, historical spending, but the Company expects to demonstrate operating leverage on its R&D expenses as revenue increases.

The funds received in connection with customer funded R&D appear in revenues and the associated expenses are included in cost of revenues and are not included in the table above. The Company believes that internally generated cash and cash reserves are adequate to fund its future R&D activity.

Operating (loss) income

For the fiscal year ended April 30, 2026, the Company recorded an operating loss of $3.0 million compared to an operating income of $11.7 million in the prior fiscal year. As mentioned in the revenue, gross profit, and SG&A sections above, the Company’s fiscal 2026 was a critically important year for the future of the Company. Going forward the Company expects to demonstrate significant operating leverage as revenue increases.

Other Income, net

The change from the prior fiscal year was mainly caused by a gain on the sale of the Company’s available-for sale marketable securities and a loss on investment due to the restructuring of FEI-Elcom. Additionally, interest expense was approximately 16% lower in fiscal year 2026, as compared to the prior fiscal year.

Income Tax Benefit

For the fiscal year ended April 30, 2026, the Company recorded an income tax benefit of $2.0 million. For the fiscal year ended April 30, 2025, the Company recorded an income tax benefit of $11.5 million.

The Company’s effective tax rate of 69.0% for fiscal year 2026 differs from the statutory rate primarily due to state income taxes, tax credits and the tax effects of stock-based compensation windfall benefits recognized during the fiscal year partially offset by an Internal Revenue Code Section 162(m) limitation on compensation deductions.

As of April 30, 2026, the Company has U.S. federal net operating losses of $10.9 million of which $1.7 million begins to expire in fiscal year 2027 through fiscal year 2031. The U.S. federal net operating losses of $10.9 million includes $1.7 million which is subject to an annual limitation under Internal Revenue Code Section 382. The remaining U.S. federal net operating losses of $9.2 million have an indefinite carry-forward period. The U.S. federal capital loss carry-forward of $0.7 million expires in fiscal years 2028. U.S. federal R&D credits of $0.8 million begin to expire in fiscal year 2038 through fiscal year 2046. The Company also has state net operating loss carryforwards, and state tax credits that expire in various years and amounts.

LIQUIDITY AND CAPITAL RESOURCES

Net cash provided by operations was $1.3 million in fiscal year 2026 compared to net cash used in operations of $1.4 million in fiscal year 2025. The Company’s balance sheet continues to reflect a highly liquid position with working capital of $27.0 million at April 30, 2026 as compared to $29.7 million at April 30, 2025.  Included in working capital at April 30, 2026 was $1.6 million consisting of cash and cash equivalents.  The Company’s current ratio was 2.3 to 1 at both April 30, 2026 and at April 30, 2025.

During fiscal years 2026 and 2025, the Company incurred $9.3 million and $3.9 million, respectively, in non-cash charges to earnings, including adjustments relating to amortization of ROU assets, loss provision accrual, deferred tax assets, depreciation and amortization expense, inventory adjustments, warranty and accounts receivable reserves and certain employee benefit plan expenses, including accounting for stock-based compensation. During fiscal year 2026, cash provided by operations was mainly due to increases in deferred tax assets, accounts payable, accrued liabilities, and decreases in inventory, which were partially offset by a decrease in contract liabilities and an increase in the net loss. During fiscal year 2025, cash used in operations was mainly due to increases in net income, mainly in the U.S. Government/DOW Satellite market, and deferred tax assets primarily due to the reduction of the valuation allowance, partially offset by a decrease in contract liabilities and contract assets.

Net cash used in investing activities for the fiscal year ended April 30, 2026 was $2.9 million compared to $1.8 million used in investing activities for the fiscal year ended April 30, 2025 all relating to purchases of capital expenditures.

Net cash used in financing activities for the fiscal year ended April 30, 2026 was $1.6 million, all related to purchase of treasury stock. Net cash used in financing activities for the fiscal year ended April 30, 2025 was $9.9 million, of which $9.6 million was related to a special cash dividend payment of $1.00 per share of common stock paid on August 29, 2024.

The Company will continue to expend resources for R&D to develop, improve and acquire products for space applications, guidance and targeting systems, and communication systems that management believes will result in future growth and profitability. The Company anticipates securing additional customer funding for a portion of its R&D activities and will allocate internal funds depending on market conditions and identification of new opportunities.  The Company expects internally generated cash will be adequate to fund these R&D efforts.  The Company may also pursue acquisitions to expand its range of products and may use internally generated cash and external funding in connection with such acquisitions.

During fiscal year 2026, as in fiscal year 2025, the impact of inflation on the Company’s business was an increase in costs for materials and services. The Company believes inflation may continue to impact expenses in fiscal year 2027 and future years.

As of April 30, 2026, the Company had retained earnings of $2.8 million. The Company believes that its cash, as of April 30, 2026, cash flows from operations, and borrowings available under the Credit Agreement (as defined below) will provide sufficient liquidity to meet its operating needs in the normal course of business in both the short-term (next twelve months from the date of issuance of these consolidated financial statements) and in the long-term (beyond the next twelve months).

On June 12, 2026, the Company entered into a senior, secured revolving credit facility with JPMorgan Chase Bank, N.A., as the lender (the “Credit Agreement”). The Credit Agreement provides for a three-year revolving credit facility of $10.0 million, of which up to $5.0 million is available for the issuance of letters of credit. The Credit Agreement provides that the Company may, at its option, increase the aggregate amount of the revolving credit facility in an amount up to $10.0 million, subject to certain customary conditions and on the terms set forth in the Credit Agreement. There can be no assurance that additional funding will become available. Commitments under the revolving credit facility are subject to a commitment fee of 0.35% per annum on the daily amount of the undrawn portion of the revolving credit facility. The Company’s obligations under the Credit Agreement are guaranteed by FEI-Zyfer, Inc., a wholly-owned subsidiary of the Company. The revolving credit facility matures on June 12, 2029. For more information regarding the Credit Agreement, see Note 7 to the Consolidated Financial Statements.

RECENT ACCOUNTING PRONOUNCEMENTS

In December 2023, the Financial Accounting Standards Board (the “FASB”) issued ASU No. 2023-09, “Income Taxes (Topic 740): Improvements to Income Tax Disclosures” (“ASU 2023-09”). ASU 2023-09 is intended to enhance the transparency and decision usefulness of income tax disclosures. The amendments in ASU 2023-09 address investor requests for enhanced income tax information primarily through changes to the rate reconciliation and income taxes paid information. Early adoption is permitted. A public entity can apply the amendments in ASU 2023-09 prospectively or retrospectively to all annual periods beginning after December 15, 2024. The guidance was adopted by the Company prospectively for the year ended April 30, 2026, and the Company, accordingly, made the required changes in its income tax related disclosure (Refer to “Note 12. Income Taxes”). The adoption of ASU 2023-09 did not have any material impact on the Company’s audited consolidated financial statements.

In November 2024, the FASB issued ASU No. 2024-03, Income Statement – Reporting Comprehensive Income – Expense Disaggregation Disclosures (Subtopic 220-40): Disaggregation of Income Statement Expenses. This ASU requires entities to disclose certain expenses, including purchases of inventory, employee compensation, depreciation, and intangible asset amortization, by caption. Additionally, entities must provide a qualitative description of the amounts remaining in relevant expense captions that are not separately disaggregated quantitatively. The amendments are effective for annual reporting periods beginning after December 15, 2026 and interim reporting periods beginning after December 15, 2027, with early adoption permitted. The Company is currently evaluating the impact this standard will have on the consolidated financial statements.

In December 2025, the FASB issued ASU No. 2025-11, Interim Reporting (Topic 270): Narrow Scope Improvements, an amendment of the FASB Accounting Standards Codification. The amendments in this ASU primarily provide clarification on interim reporting requirements and enhanced disclosure requirements. The amendments also include a disclosure principle to disclose all events since the end of the last annual reporting period that have a material impact on the Company. The ASU is effective for fiscal years beginning after December 15, 2027, and all interim reporting periods within applicable annual periods, with early adoption permitted. The Company is currently evaluating the effect that this standard will have on its consolidated financial statements and related disclosures.

OTHER MATTERS

The financial information reported herein is not necessarily indicative of future operating results or of the future financial condition of the Company.

Item 7A. Quantitative and Qualitative Disclosure about Market Risk

Not applicable.

Item 8. Financial Statements and Supplementary Data

Report of Independent Registered Public Accounting Firm

Board of Directors and Shareholders

Frequency Electronics, Inc.

Opinion on the financial statements

We have audited the accompanying consolidated balance sheets of Frequency Electronics, Inc. (a Delaware corporation) and subsidiaries (the “Company”) as of April 30, 2026 and 2025, the related consolidated statements of operations, changes in stockholders’ equity, and cash flows for each of the two years in the period ended April 30, 2026, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of April 30, 2026 and 2025, and the results of its operations and its cash flows for each of the two years in the period ended April 30, 2026, in conformity with accounting principles generally accepted in the United States of America.

Basis for opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical audit matter

The critical audit matter communicated below is a matter arising from the current period audit of the financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Revenue recognized using the percentage-of-completion cost-to-cost method

As described further in note 1 to the consolidated financial statements, the Company generates a majority of its revenue from contracts with its customers where revenue is recognized over time using the percentage-of-completion cost-to-cost method. Under this method, the Company measures progress towards completion based on the ratio of costs incurred to date to total estimated costs to satisfy the Company’s performance obligation. The percentage-of-completion cost-to-cost method requires management to use significant estimates and assumptions to estimate costs associated with its contracts with customers. These costs are estimated at contract inception and are monitored and updated throughout the duration of the contract. We identified revenue recognized using the percentage-of-completion cost-to-cost method as a critical audit matter.

The principal consideration for our determination that revenue recognized using the percentage-of-completion cost-to-cost method is a critical audit matter is management’s use of significant estimates and assumptions in determining the total estimated costs at completion. Auditing these estimates and assumptions required especially challenging, subjective, and complex auditor judgment. Table of Contents

Our audit procedures related to cost estimates used in recognizing revenue under the percentage-of-completion cost-to-cost method included the following, among others:

/s/ GRANT THORNTON LLP

We have served as the Company’s auditor since 2023.

Melville, New York

July 16, 2026

FREQUENCY ELECTRONICS, INC. and SUBSIDIARIES

Consolidated Balance Sheets

(In thousands, except par value)

The accompanying notes are an integral part of these consolidated financial statements.

FREQUENCY ELECTRONICS, INC. and SUBSIDIARIES

Consolidated Statements of Operations

(In thousands, except per share data)

The accompanying notes are an integral part of these consolidated financial statements.

FREQUENCY ELECTRONICS, INC. and SUBSIDIARIES

Consolidated Statements of Cash Flows

(In thousands)

The accompanying notes are an integral part of these consolidated financial statements.

FREQUENCY ELECTRONICS, INC. and SUBSIDIARIES

Consolidated Statements of Cash Flows

(In thousands)

(Continued)

The accompanying notes are an integral part of these consolidated financial statements.

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

Consolidated Statements of Changes in Stockholders’ Equity

Years ended April 30, 2026 and 2025

(In thousands, except share data)

The accompanying notes are an integral part of these consolidated financial statements.

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025

FREQUENCY ELECTRONICS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

April 30, 2026 and 2025