FORM 10-K SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 [X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 (FEE REQUIRED) FOR THE FISCAL YEAR ENDED JUNE 30, 1995 [ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 (NO FEE REQUIRED) For the transition period from to Commission File Number 1-5318 KENNAMETAL INC. (Exact name of registrant as specified in its charter) Pennsylvania 25-0900168 (State or other jurisdiction of (I.R.S. Employer incorporation or organization) Identification No.) Route 981 at Westmoreland County Airport P. O. Box 231 Latrobe, Pennsylvania 15650 (Address of principal executive offices) Registrant's telephone number, including area code: (412) 539-5000 Securities registered pursuant to Section 12(b) of the Act: Name of each exchange Title of each class on which registered ------------------- ----------------------- Capital Stock, par value $1.25 per share New York Stock Exchange Preferred Stock Purchase Rights New York Stock Exchange Securities registered pursuant to Section 12(g) of the Act: None. Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, and (2) has been subject to such filing requirements for the past 90 days. YES [X] NO [ ] Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X] As of August 31, 1995, the aggregate market value of the registrant's Capital Stock held by non-affiliates of the registrant, estimated solely for the purposes of this Form 10-K, was approximately $891,200,000. For purposes of the foregoing calculation only, all directors and executive officers of the registrant and each person who may be deemed to own beneficially more than 5% of the registrant's Capital Stock, have been deemed affiliates. As of August 31, 1995, there were 26,606,068 shares of Capital Stock outstanding. DOCUMENTS INCORPORATED BY REFERENCE Portions of the 1995 Annual Report to Shareholders are incorporated by reference into Parts I, II, and IV. Portions of the Proxy Statement for the 1995 Annual Meeting of Shareholders are incorporated by reference into Parts III and IV.
TABLE OF CONTENTS Item No. -------- PART I 1. Business 2. Properties 3. Legal Proceedings 4. Submission of Matters to a Vote of Security Holders Officers of the Registrant PART II 5. Market for the Registrant's Capital Stock and Related Stockholder Matters 6. Selected Financial Data 7. Management's Discussion and Analysis of Financial Condition and Results of Operations 8. Financial Statements and Supplementary Data 9. Changes in and Disagreements on Accounting and Financial Disclosure PART III 10. Directors and Executive Officers of the Registrant 11. Executive Compensation 12. Security Ownership of Certain Beneficial Owners and Management 13. Certain Relationships and Related Transactions PART IV 14. Exhibits, Financial Statement Schedules and Reports on Form 8-K
PART I ITEM 1. BUSINESS Overview -------- Kennametal Inc. was incorporated in Pennsylvania in 1943. Kennametal Inc. and subsidiaries ("Kennametal" or the "company") manufacture, purchase and distribute a broad range of tools, tooling systems, supplies and services for the metalworking, mining and highway construction industries. Kennametal specializes in developing and manufacturing metalcutting tools and wear resistant parts using a specialized type of powder metallurgy. Kennametal's metalcutting tools are made of cemented carbides, ceramics, cermets and other hard materials. The company manufactures a complete line of toolholders and toolholding systems by machining and fabricating steel bars and other metal alloys. Kennametal's mining and construction cutting tools are tipped with cemented carbide and are used for underground coal mining and highway construction, repair and maintenance. Metallurgical products consist of powders made from ore concentrates, compounds and secondary materials. Business Segment and Product Classes ------------------------------------ The company operates predominantly as a tooling supplier specializing in powder metallurgy, which represents a single business segment. While many of the company's products are similar in composition, sales are classified into three major categories: metalworking products, mining and construction products and metallurgical products. The company's sales by product class are presented on page 23 of the 1995 Annual Report to Shareholders, and such information is incorporated herein by reference. Additional information about the company's operations by geographic area is presented on page 31 of the 1995 Annual Report to Shareholders, and such information is incorporated herein by reference. Metalworking Products --------------------- Kennametal markets, manufactures and distributes a full line of products and services for the metalworking industry. The company provides metalcutting tools, abrasives, precision measuring devices, power tools, hand tools and machine tool accessories to manufacturing companies in a wide range of industries. A Kennametal tooling system usually consists of a steel toolholder and an indexable cutting tool called an insert. During a metalworking operation, the toolholder is positioned in a machine tool which provides the turning power. While the workpiece or toolholder is rapidly rotating, the cutting tool insert contacts the workpiece and cuts or shapes the workpiece. The cutting tool insert is consumed during use and must be replaced periodically. Metalcutting operations include turning, boring, threading, grooving, milling and drilling. The company also makes wear resistant parts for use in abrasive environments and specialty applications. Mining and Construction Products -------------------------------- Mining and construction cutting tools are fabricated from steel parts and tipped with cemented carbide. Mining tools, used primarily in the coal industry, include longwall shearer and continuous miner drums, blocks, bits, pinning rods, augers and a wide range of mining tool accessories. The company also supplies compacts for mining, quarrying, water well drilling and oil and gas exploration. Construction cutting tools include carbide-tipped bits for ditching, trenching and road planing; grader blades for site preparation and routine roadbed control and snowplow blades and shoes for winter road plowing. Metallurgical Products ---------------------- The company makes proprietary metallurgical powders for use as a basic material in many of its metalworking, mining and construction products. In addition, the company produces a variety of metallurgical powders and related materials for specialized markets. These products include intermediate carbide powders, hardfacing materials and matrix powders which are sold to manufacturers of cemented carbide products, oil and gas drilling equipment and diamond drill bits. Recent Acquisition ------------------- In August 1993, the company acquired an 81 percent interest in Hertel AG ("Hertel") for $43 million in cash and $55 million of assumed debt. Hertel, based in Fuerth, Germany, is a manufacturer and marketer of cemented carbide tools and tooling systems which are similar to the metalcutting tools and tooling systems produced by the company. The acquisition of Hertel has not materially changed the product lines offered by the company. While the company's primary market is the United States, Hertel's primary market is Germany and western Europe. The acquisition of Hertel significantly increased the company's market share in these markets. Hertel had consolidated sales of approximately $201 million for the year ended December 31, 1992. Since January 1, 1994, the company purchased additional shares of Hertel for $12 million, thereby increasing the company's ownership interest to 91 percent at June 30, 1995. International Operations ------------------------ The company's principal international operations are conducted in western Europe and Canada. In addition, the company has joint ventures in Japan, India and Italy, sales offices and sales agents in Asia-Pacific and sales agents and distributors in eastern Europe and other areas of the world. The company's international operations are subject to the usual risks of doing business in those countries, including currency fluctuations and changes in social, political and economic environments. In management's opinion, the company's business is not materially dependent upon any one international location involving significant risk. The company's international sales are presented on page 23 of the 1995 Annual Report to Shareholders, and such information is incorporated herein by reference. Information pertaining to the effects of foreign currency fluctuations is contained under the caption "Foreign Currency Translation" in the notes to the consolidated financial statements on page 24 of the 1995 Annual Report to Shareholders, and such information is incorporated herein by reference. Marketing and Distribution -------------------------- The company's products are sold through three distinct channels: direct sales, full-service supply and mail order catalogs. The company's manufactured products are sold to end-users primarily through a direct sales force. Service engineers and technicians directly assist customers with product design, selection and application. In addition, Kennametal- manufactured products, together with a broad range of purchased products, are sold through full-service supply programs and mail order catalogs. The company also uses independent distributors and sales agents in the United States and certain international markets. The company's products are marketed under various trademarks and tradenames, such as Kennametal*, Hertel*, the letter K combined with other identifying letters and/or numbers, Block Style K*, Kendex*, Kenloc*, Top Notch*, Erickson*, Kyon*, KM*, Drill-Fix* and Fix-Perfect*. Purchased products are sold under the manufacturer's name or a private label. Competition ----------- Kennametal is one of the world's leading producers of cemented carbide tools and maintains a strong competitive position, especially in the United States and Canada. There is active competition in the sale of all products made by the company, with approximately 30 companies engaged in the cemented carbide business in the United States and many more outside the U.S. Several competitors are divisions of larger corporations. In addition, several hundred fabricators and toolmakers in the United States, many of whom operate out of relatively small shops, produce tools similar to those made by the company and buy the cemented carbide components for such tools from cemented carbide producers, including the company. Major domestic competition exists from both U.S.-based and international-based concerns. In addition, the company competes with thousands of industrial supply companies in the United States. The principal methods of competition in the company's business are service, product innovation, quality, availability and price. The company believes that its competitive strength rests on its customer service capabilities including its multiple distribution channels, its ability to develop new and improved tools responsive to the needs of its customers and the consistent high quality of its products. These factors frequently permit the company to sell such products based on the value added for the customer rather than strictly on competitive prices. Seasonality ----------- Seasonal variations do not have a major effect on the company's business. However, to varying degrees, traditional summer vacation shutdowns of metalworking customers' plants and holiday shutdowns often affect the company's sales levels during the first and second quarters of its fiscal year. Backlog ------- The company's backlog of orders is generally not significant to its operations. Approximately 80 percent of all orders are filled from stock and the balance is generally filled within short lead-times. Research and Development ------------------------ The company is involved in research and development of new products and processes. Research and development expenses totaled $18.7 million, $15.2 million and $14.7 million in 1995, 1994 and 1993, respectively. Additionally, certain costs associated with improving manufacturing processes are included in cost of goods sold. The company holds a number of patents and licenses which, in the aggregate, are not material to the operation of the business. The company has brought a number of new or improved products to market during the past few years. These include metalcutting inserts that incorporate innovative tool geometries for improved chip control and productivity, grade KC994M* multi-coated metalcutting inserts for milling applications, grades KC9010* and KC9025* multi-coated metalcutting inserts for turning applications, grade Kyon 3500* ceramic metalcutting inserts and grade KCD25* diamond-coated metalcutting inserts. Raw Materials and Supplies -------------------------- Major metallurgical raw materials consist of ore concentrates, compounds and secondary materials containing tungsten, tantalum, titanium, niobium and cobalt. Although these raw materials are in relatively adequate supply, major sources are located abroad and prices at times have been volatile. For these reasons, the company exercises great care in the selection, purchase and inventory availability of these materials. The company also purchases substantial quantities of steel bars and forgings for making toolholders and other tool parts and accessories. Products purchased for resale are obtained from hundreds of suppliers located in the U.S. and abroad. Employees --------- The company employed approximately 7,000 persons at June 30, 1995, of which 4,400 were located in the United States and 2,600 in other parts of the world, principally Europe and Canada. Approximately 1,200 employees were represented by labor unions, of which 140 were hourly-rated employees located at plants in the Latrobe, Pennsylvania area. The remaining 1,060 employees represented by labor unions were employed at eight plants located outside of the United States. The company considers its labor relations to be generally good. Regulation ---------- Compliance with government laws and regulations pertaining to the discharge of materials or pollutants into the environment or otherwise relating to the protection of the environment, did not have a material effect on the company's capital expenditures, earnings or competitive position for the year covered by this report, nor is such compliance expected to have a material effect in the future. ------------------------------------- * Trademark owned by Kennametal Inc.
ITEM 2. PROPERTIES Presented below is a summary of principal manufacturing facilities used by the company and its majority-owned subsidiaries. <TABLE> <CAPTION> Owned/ Location Leased Principal Products -------- ------ ------------------ <S> <C> <C> UNITED STATES: Troy, Michigan Leased Metalworking Toolholders Fallon, Nevada Owned Metallurgical Powders Henderson, North Carolina Owned Metallurgical Powders Roanoke Rapids, North Carolina Owned Metalworking Inserts Orwell, Ohio Owned Metalworking Inserts Solon, Ohio Owned Metalworking Toolholders Bedford, Pennsylvania Owned Mining and Construction Tools and Wear Parts Latrobe, Pennsylvania Owned Metallurgical Powders and Wear Parts Johnson City, Tennessee Owned Metalworking Inserts New Market, Virginia Owned Metalworking Toolholders INTERNATIONAL: Port Coquitlam, Canada Owned Metallurgical Powders Victoria, Canada Owned Wear Parts Shanxi, China Owned Mining Tools Kingswinford, England Leased Metalworking Toolholders Ebermannstadt, Germany Owned Metalworking Inserts Mistelgau, Germany Owned Metallurgical Powders, Metalworking Inserts and Wear Parts Nabburg, Germany Owned Metalworking Toolholders Vohenstrauss, Germany Leased Metalworking Carbide Drills Arnhem, Netherlands Owned Wear Products </TABLE> The company also has a network of warehouses and customer service centers located throughout North America, western Europe, Asia and Australia, a significant portion of which are leased. The majority of the company's research and development efforts are conducted in a corporate technology center located adjacent to corporate headquarters in Latrobe, Pennsylvania. All significant properties are used in the company's dominant business of powder metallurgy, tools, tooling systems and supplies. The company's production capacity is adequate for its present needs. The company believes that its properties have been adequately maintained, are generally in good condition and are suitable for the company's business as presently conducted. ITEM 3. LEGAL PROCEEDINGS (a) On August 13, 1993, the company was served with a Notice of Violation dated August 9, 1993, issued by the United States Environmental Protection Agency ("EPA"). The EPA alleges violations concerning visible emissions from the company's Fallon, Nevada facility. On October 6, 1993, the EPA issued an interim compliance order with respect to this matter. On April 26, 1994, the company was served with a second Notice of Violation dated April 19, 1994, which relates to the first Notice of Violation. The EPA alleges in the second but related notice the violation of a regulation concerning the allowable particulate emission rate. The company has agreed with EPA to pay a civil fine of $425,000 to settle those alleged violations without an admission of liability. (b) In connection with a Domination Contract with Hertel, under German law, the company is required to offer to minority shareholders to purchase their shares for a reasonable compensation and to guarantee dividends during the term of the Domination Contract (ending June 30, 1996, subject to annual renewals) and to pay to Hertel any net cumulative losses it sustains during the term and has liability to Hertel creditors as if Hertel merged with the company. Minority shareholders are contesting the reasonableness of the purchase price for minority shares and the minimum dividend on minority shares offered by the company in connection with the Domination Contract. It is management's opinion that Hertel has viable defenses to the contest of the reasonableness of the minority share purchase price and minimum dividend and, in any event, that the ultimate outcome of this matter will not have a material adverse effect on the results of operations or financial position of the company. (c) There are no other material pending legal proceedings, other than litigation incidental to the ordinary course of business, to which the company or any of its subsidiaries is a party or of which any of their property is the subject. ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS During the fourth quarter of fiscal year 1995, there were no matters submitted to a vote of security holders through the solicitation of proxies or otherwise. <TABLE> <CAPTION> OFFICERS OF THE REGISTRANT Name, Age, and Position Experience During Past Five Years (2) ----------------------- ------------------------------------- <S> <C> Robert L. McGeehan, 58 (1) President and Director since 1989. Chief President Executive Officer since October 1, 1991. Chief Executive Officer Director David B. Arnold, 56 (1) Vice President since 1979. Chief Technical Vice President Officer since 1988. Chief Technical Officer James R. Breisinger, 45 Vice President since 1990. Renamed Vice President Controller in 1994. Managing Director of Controller Europe from 1991 to 1994. Controller from 1983 to 1991. David T. Cofer, 50 (1) Vice President since 1986. Secretary and Vice President General Counsel since 1982. Secretary and General Counsel Richard P. Gibson, 60 Assistant Treasurer since 1985. Director Assistant Treasurer of Taxes since 1980. Director of Taxes James W. Heaton, 63 Senior Vice President and Director of Senior Vice President Customer Satisfaction since 1990. Director of Customer Satisfaction Richard C. Hendricks, 56 (1) Vice President since 1982. Director of Vice President Corporate Business Development since 1992. Director of Corporate Business General Manager of the Mining and Development Metallurgical Division from 1990 to 1992. Timothy D. Hudson, 49 Vice President since 1994. Director Vice President of Human Resources since 1992. Corporate Director of Human Resources Manager of Human Resources from 1978 to 1992. H. Patrick Mahanes, Jr., 52 (1) Vice President since 1987. Named Chief Vice President Operating Officer in 1995. Director of Chief Operating Officer Operations from 1991 to 1995. Director of Metalworking Manufacturing from 1988 to 1991. Richard V. Minns, 57 Vice President since 1990. Director of Vice President Sales for the Metalworking Systems Division Director of Metalworking Sales, since 1985. North America James E. Morrison, 44 Vice President since 1994. Treasurer Vice President since 1987. Treasurer Kevin G. Nowe, 43 Joined the company as Assistant General Assistant Secretary Counsel in 1992 and was elected Assistant Assistant General Counsel Secretary in 1993. Previously was Senior Counsel and Corporate Secretary of Emro Marketing Company in Enon, Ohio. Richard J. Orwig, 54 (1) Vice President since 1987. Named Chief Vice President Financial and Administrative Officer in Chief Financial and Administrative 1994. Director of Administration from Officer 1991 to 1994. Director of Human Resources from 1989 to 1991. Alan G. Ringler, 45 (1) Vice President since 1989. Director of Vice President Metalworking Systems Division since 1992. Director of Metalworking Systems Director of Metalworking, North America, Division from 1991 to 1992. Managing Director, Europe, from 1990 to 1991. Michael W. Ruprich, 39 (1) Vice President and President of J&L Vice President, Kennametal Inc. America Inc. since 1994. General Manager President, J&L America Inc. of J&L from 1993 to 1994. National Sales and Marketing Manager from 1992 to 1993. General Manager-East Coast Region from 1990 to 1992. P. Mark Schiller, 47 Vice President since 1992. Director of Vice President Kennametal Distribution Services since Director of Kennametal Distribution 1990. Services <FN> Notes: ----- (1) Executive officer of the Registrant. (2) Each officer has been elected by the Board of Directors to serve until removed or until a successor is elected and qualified, and has served continuously as an officer since first elected. </FN> </TABLE> PART II The information required under Items 5 through 8 is included in the 1995 Annual Report to Shareholders and such information is incorporated herein by reference as indicated by the following table. <TABLE> <CAPTION> Incorporated by Reference to Captions and Pages of the 1995 Annual Report ------------------------------------- <S> <C> Item 5. Market for the Registrant's Quarterly Financial Information Capital Stock and Related (Unaudited) on page 32. Stockholder Matters Item 6. Selected Financial Data Ten-Year Financial Highlights (information with respect to the years 1991 to 1995) on pages 34 and 35. Item 7. Management's Discussion and Management's Discussion & Analysis Analysis of Financial Condition on pages 15 to 23. and Results of Operations Item 8. Financial Statements and Item 14(a)1. herein and Quarterly Supplementary Data Financial Information (Unaudited) on page 32. Item 9. Changes in and Disagreements Not applicable. on Accounting and Financial Disclosure </TABLE> PART III ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT Incorporated herein by reference is the information set forth in Part I under the caption "Officers of the Registrant," and the information set forth under the caption "Election of Directors" in the company's definitive proxy statement to be filed with the Securities and Exchange Commission within 120 days after June 30, 1995 ("1995 Proxy Statement"). ITEM 11. EXECUTIVE COMPENSATION Incorporated herein by reference is the information set forth under the caption "Compensation of Executive Officers" and certain information regarding directors' fees under the caption "Board of Directors and Board Committees" in the 1995 Proxy Statement. ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT Incorporated herein by reference is the information set forth under the caption "Ownership of Capital Stock by Directors, Nominees and Executive Officers" with respect to the directors' and officers' shareholdings and under the caption "Principal Holders of Voting Securities" with respect to other beneficial owners in the 1995 Proxy Statement. ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS Incorporated herein by reference is certain information set forth in the notes to the table under the caption "Election of Directors" and under the caption "Certain Transactions" in the 1995 Proxy Statement. PART IV ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES, AND REPORTS ON FORM 8-K (a) Documents filed as part of this Form 10-K report. 1. Financial Statements The consolidated balance sheets as of June 30, 1995 and 1994, the consolidated statements of income, shareholders' equity, and cash flows for each of the three years in the period ended June 30, 1995,and the notes to consolidated financial statements, together with the report thereon of Arthur Andersen LLP dated July 24, 1995, presented in the company's 1995 Annual Report to Shareholders, are incorporated herein by reference. 2. Financial Statement Schedules The financial statement schedules shown below should be read in conjunction with the financial statements contained in the 1995 Annual Report to Shareholders. Other schedules are omitted because they are not applicable or the required information is shown in the financial statements or notes thereto. Separate financial statements of the company are omitted because the company is primarily an operating company and all significant subsidiaries included in the consolidated financial statements are wholly-owned, with the exception of Kennametal Hertel AG, in which the company has a 91 percent interest. Financial Statement Schedules: Report of Independent Public Accountants II - Valuation and Qualifying Accounts for the Three Years Ended June 30, 1995 3. Exhibits (3) Articles of Incorporation and Bylaws (3.1) Amended and Restated Exhibit 3.1 of the company's Articles of Incorporation September 30, 1994 Form 10-Q as Amended is incorporated herein by reference. (3.2) Bylaws Exhibit 3.1 of the company's March 31, 1991 Form 10-Q is incorporated herein by reference. (4) Instruments Defining the Rights of Security Holders, Including Indentures (4.1) Rights Agreement dated Exhibit 4 of the company's October 25, 1990 Form 8-K dated October 23, 1990 is incorporated herein by reference. (4.2) Form of Note Agreement Exhibit 4.3 of the company's with various creditors 1990 Form 10-K is incorporated dated as of May 1, 1990 herein by reference. Note: Copies of instruments with respect to long-term debt or capitalized lease obligations which do not exceed 10% of consolidated assets will be furnished to the Securities and Exchange Commission upon request. (10) Material Contracts (10.1)* Management Performance The discussion regarding Bonus Plan the Management Performance Bonus Plan under the caption "Report of the Board of Directors Committee on Executive Compensation" contained in the company's 1995 Proxy Statement is incorporated herein by reference. (10.2)* Stock Option Plan Exhibit 10.3 of the company's of 1982, as amended December 31, 1985 Form 10-Q is incorporated herein by reference. (10.3)* Stock Option and Exhibit 10.1 of the company's Incentive Plan of 1988 December 31, 1988 Form 10-Q is incorporated herein by reference. (10.4)* Form of Stock Option Exhibit 10.2 of the company's Agreement with respect December 31, 1988 Form 10-Q to the Plan set forth is incorporated herein by as Exhibit 10.3 hereof reference. (10.5)* Officer employment Exhibit 10.3 of the company's agreements, as amended 1988 Form 10-K is incorporated and restated herein by reference. (10.6)* Deferred Fee Plan for Exhibit 10.4 of the company's Outside Directors 1988 Form 10-K is incorporated herein by reference. (10.7)* Executive Deferred Exhibit 10.5 of the company's Compensation Trust 1988 Form 10-K is incorporated Agreement herein by reference. (10.8)* Form of Employment Exhibit 10.8 of the company's Agreement with certain 1990 Form 10-K is incorporated executive officers herein by reference. (10.9)* Stock Option and Exhibit 10.1 of the company's Incentive Plan of 1992 September 30, 1992 Form 10-Q is incorporated herein by reference. (10.10)* Directors Stock Exhibit 10.2 of the company's Incentive Plan September 30, 1992 Form 10-Q is incorporated herein by reference. (10.11)* Severance Agreement Exhibit 10.11 of the company's executed by and between 1993 Form 10-K is incorporated Kennametal Inc. and herein by reference. H. L. Dykema (10.12) Credit Agreement dated Exhibit 10.12 of the company's as of July 29, 1993 1993 Form 10-K is incorporated by and among Kennametal herein by reference. Inc. and Deutsche Bank AG, Mellon Bank N.A. and PNC Bank, National Association (10.13) Underwriting Agreement Exhibit 1.1 of the company's (U.S. Version) March 31, 1994 Form 10-Q is incorporated herein by reference. (10.14) Underwriting Agreement Exhibit 1.2 of the company's (International Version) March 31, 1994 Form 10-Q is incorporated herein by reference. (10.15) Amendment No. 1 dated Exhibit 10.15 of the company's as of October 26, 1993 June 30, 1994 Form 10-K is to Credit Agreement incorporated herein by dated as of July 29, 1993 reference. by and among Kennametal Inc. and Deutsche Bank AG, Mellon Bank N.A. and PNC Bank, National Association (10.16) Amendment No. 2 dated Exhibit 10.16 of the company's as of June 15, 1994 to June 30, 1994 Form 10-K is Credit Agreement dated incorporated herein by as of July 29, 1993 by reference. and among Kennametal Inc. and Deutsche Bank AG, Mellon Bank N.A. and PNC Bank, National Association (13) Annual Report to Shareholders Portions of the 1995 Annual Report are filed herewith. (21) Subsidiaries of the Registrant Filed herewith. (23) Consent of Independent Public Filed herewith. Accountants (27) Financial Data Schedule Filed herewith. (b) Reports on Form 8-K. No reports on Form 8-K were filed during the quarter ended June 30, 1995. ------------------------------------------- * Denotes management contract or compensatory plan or arrangement.
SIGNATURES Pursuant to the requirements of Section 13 or 15 (d) of the Securities Exchange Act of 1934, the company has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized. KENNAMETAL INC. By RICHARD J. ORWIG ------------------------------- Richard J. Orwig Vice President, Chief Financial and Administrative Officer Date: September 19, 1995 Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated. <TABLE> <CAPTION> Signature Title Date --------- ----- ---- <S> <C> <C> QUENTIN C. MCKENNA ------------------------------ Quentin C. McKenna Chairman of the Board September 19, 1995 ROBERT L. MCGEEHAN ------------------------------ Robert L. McGeehan President, Chief Executive September 19, 1995 Officer and Director JAMES R. BREISINGER ------------------------------ James R. Breisinger Vice President, Controller September 19, 1995 and Chief Accounting Officer RICHARD J. ORWIG ------------------------------ Richard J. Orwig Vice President, Chief September 19, 1995 Financial and Administrative Officer RICHARD C. ALBERDING ------------------------------ Richard C. Alberding Director September 19, 1995 PETER B. BARTLETT ------------------------------ Peter B. Bartlett Director September 19, 1995 ROBERT N. ESLYN ------------------------------ Robert N. Eslyn Director September 19, 1995 A. PETER HELD ------------------------------ A. Peter Held Director September 19, 1995 WARREN H. HOLLINSHEAD ------------------------------ Warren H. Hollinshead Director September 19, 1995 ALOYSIUS T. MCLAUGHLIN, JR. ------------------------------ Aloysius T. McLaughlin, Jr. Director September 19, 1995 WILLIAM R. NEWLIN ------------------------------ William R. Newlin Director September 19, 1995 LARRY YOST ------------------------------ Larry Yost Director September 19, 1995 </TABLE>
REPORT OF INDEPENDENT PUBLIC ACCOUNTANTS ON FINANCIAL STATEMENT SCHEDULES To the Board of Directors and Shareholders of Kennametal Inc. We have audited, in accordance with generally accepted auditing standards, the financial statements included in Kennametal Inc.'s annual report to shareholders incorporated by reference in this Form 10-K, and have issued our report thereon dated July 24, 1995. Our audit was made for the purpose of forming an opinion on those statements taken as a whole. The schedules listed in the index in Item 14(a)2 of this Form 10-K are the responsibility of the Company's management and are presented for purposes of complying with the Securities and Exchange Commission's rules and are not a part of the basic financial statements. These schedules have been subjected to the auditing procedures applied in the audit of the basic financial statements and, in our opinion, fairly state in all material respects the financial data required to be set forth therein in relation to the basic financial statements taken as a whole. ARTHUR ANDERSEN LLP Pittsburgh, Pennsylvania July 24, 1995
<TABLE> KENNAMETAL INC. SCHEDULE II VALUATION AND QUALIFYING ACCOUNTS FOR THE THREE YEARS ENDED JUNE 30, 1995 ---------------------------------------------------------------------------------------------------------------------- (Dollars in thousands) <CAPTION> Additions ---------------------------------------- Balance at Charged to Deductions Balance at Beginning of Costs and Other from End of Description Year Expenses Recoveries Adjustments Reserves (c) Year ----------- ------------ ---------- ---------- ----------- ------------- ---------- <S> <C> <C> <C> <C> <C> <C> 1995 ---- Allowance for doubtful accounts $9,328 $1,477 $237 $2,131 (a) $1,067 $12,106 ====== ====== ==== ====== ====== ======= 1994 ---- Allowance for doubtful accounts $2,062 $ 608 $334 $6,682 (b) $ 358 $ 9,328 ====== ===== ==== ====== ====== ======= 1993 ---- Allowance for doubtful accounts $2,054 $ 754 $247 $ - $ 993 $ 2,062 ====== ====== ==== ====== ====== ======= <FN> (a) Represents foreign currency translation adjustment. (b) Represents the allowance recognized in connection with the purchase of an 81 percent interest in Hertel AG. (c) Represents uncollected accounts charged against the allowance. </FN> </TABLE>
<TABLE> <CAPTION> EXHIBIT INDEX Exhibit No. Reference ------- ------------------------------------ <S> <C> <C> 3.1 Amended and Restated Articles Exhibit 3.1 of the company's of Incorporation as Amended September 30, 1994 Form 10-Q is incorporated herein by reference. 3.2 Bylaws Exhibit 3.1 of the company's March 31, 1991 Form 10-Q is incorporated herein by reference. 4.1 Rights Agreement dated Exhibit 4 of the company's October 25, 1990 Form 8-K dated October 23, 1990 is incorporated herein by reference. 4.2 Form of Note Agreement with Exhibit 4.3 of the company's 1990 various creditors dated as Form 10-K is incorporated herein of May 1, 1990 by reference. 10.1 Management Performance The discussion regarding the Bonus Plan Management Performance Bonus Plan under the caption "Report of the Board of Directors Committee on Executive Compensation" contained in the company's 1995 Proxy Statement is incorporated herein by reference. 10.2 Stock Option Plan of 1982, Exhibit 10.3 of the company's as amended December 31, 1985 Form 10-Q is incorporated herein by reference. 10.3 Stock Option and Exhibit 10.1 of the company's Incentive Plan of 1988 December 31, 1988 Form 10-Q is incorporated herein by reference. 10.4 Form of Stock Option Exhibit 10.2 of the company's Agreement with respect to December 31, 1988 Form 10-Q is the Plan set forth as incorporated herein by reference. Exhibit 10.3 hereof 10.5 Officer employment agreements, Exhibit 10.3 of the company's 1988 as amended and restated Form 10-K is incorporated herein by reference. 10.6 Deferred Fee Plan for Exhibit 10.4 of the company's 1988 Outside Directors Form 10-K is incorporated herein by reference. 10.7 Executive Deferred Exhibit 10.5 of the company's 1988 Compensation Trust Form 10-K is incorporated herein by Agreement reference. 10.8 Form of Employment Agreement Exhibit 10.8 of the company's 1990 with certain executive officers Form 10-K is incorporated herein by reference. 10.9 Stock Option and Exhibit 10.1 of the company's Incentive Plan of 1992 September 30, 1992 Form 10-Q is incorporated herein by reference. 10.10 Directors Stock Incentive Plan Exhibit 10.2 of the company's September 30, 1992 Form 10-Q is incorporated herein by reference. 10.11 Severance Agreement executed Exhibit 10.11 of the company's 1993 by and between Kennametal Inc. Form 10-K is incorporated herein by and H.L. Dykema reference. 10.12 Credit Agreement dated as of Exhibit 10.12 of the company's 1993 July 29, 1993 by and among Form 10-K is incorporated herein by Kennametal Inc. and Deutsche reference. Bank AG, Mellon Bank N.A. and PNC Bank, National Association 10.13 Underwriting Agreement Exhibit 1.1 of the company's (U.S. Version) March 31, 1994 Form 10-Q is incorporated herein by reference. 10.14 Underwriting Agreement Exhibit 1.2 of the company's (International Version) March 31, 1994 Form 10-Q is incorporated herein by reference. 10.15 Amendment No. 1 dated as of Exhibit 10.15 of the company's October 26, 1993 to Credit June 30, 1994 Form 10-K is Agreement dated as of incorporated herein by reference. July 29, 1993 by and among Kennametal Inc. and Deutsche Bank AG, Mellon Bank N.A. and PNC Bank, National Association 10.16 Amendment No. 2 dated as of Exhibit 10.16 of the company's June 15, 1994 to Credit June 30, 1994 Form 10-K is Agreement dated as of incorporated herein by reference. July 29, 1993 by and among Kennametal Inc. and Deutsche Bank AG, Mellon Bank N.A. and PNC Bank, National Association 13 Annual Report to Shareholders Portions of the 1995 Annual Report are filed herewith. 21 Subsidiaries of the Registrant Filed herewith. 23 Consent of Independent Public Filed herewith. Accountants 27 Financial Data Schedule Filed herewith. </TABLE>