Standard Motor Products - 10-Q quarterly report FY2025 Q1

000009338912-312025Q1falseAdoptedAdoptedTerminatedTerminatedthree monthsxbrli:sharesiso4217:USDiso4217:USDxbrli:sharessmp:segmentxbrli:pureiso4217:EURsmp:renewal_optioniso4217:PLNsmp:claim00000933892025-01-012025-03-3100000933892025-04-2800000933892024-01-012024-03-3100000933892025-03-3100000933892024-12-3100000933892023-12-3100000933892024-03-310000093389us-gaap:CommonStockMember2024-12-310000093389us-gaap:AdditionalPaidInCapitalMember2024-12-310000093389us-gaap:RetainedEarningsMember2024-12-310000093389us-gaap:AccumulatedOtherComprehensiveIncomeMember2024-12-310000093389us-gaap:TreasuryStockCommonMember2024-12-310000093389us-gaap:ParentMember2024-12-310000093389us-gaap:NoncontrollingInterestMember2024-12-310000093389us-gaap:RetainedEarningsMember2025-01-012025-03-310000093389us-gaap:ParentMember2025-01-012025-03-310000093389us-gaap:NoncontrollingInterestMember2025-01-012025-03-310000093389us-gaap:AccumulatedOtherComprehensiveIncomeMember2025-01-012025-03-310000093389us-gaap:AdditionalPaidInCapitalMember2025-01-012025-03-310000093389us-gaap:TreasuryStockCommonMember2025-01-012025-03-310000093389us-gaap:CommonStockMember2025-03-310000093389us-gaap:AdditionalPaidInCapitalMember2025-03-310000093389us-gaap:RetainedEarningsMember2025-03-310000093389us-gaap:AccumulatedOtherComprehensiveIncomeMember2025-03-310000093389us-gaap:TreasuryStockCommonMember2025-03-310000093389us-gaap:ParentMember2025-03-310000093389us-gaap:NoncontrollingInterestMember2025-03-310000093389us-gaap:CommonStockMember2023-12-310000093389us-gaap:AdditionalPaidInCapitalMember2023-12-310000093389us-gaap:RetainedEarningsMember2023-12-310000093389us-gaap:AccumulatedOtherComprehensiveIncomeMember2023-12-310000093389us-gaap:TreasuryStockCommonMember2023-12-310000093389us-gaap:ParentMember2023-12-310000093389us-gaap:NoncontrollingInterestMember2023-12-310000093389us-gaap:RetainedEarningsMember2024-01-012024-03-310000093389us-gaap:ParentMember2024-01-012024-03-310000093389us-gaap:NoncontrollingInterestMember2024-01-012024-03-310000093389us-gaap:AccumulatedOtherComprehensiveIncomeMember2024-01-012024-03-310000093389us-gaap:TreasuryStockCommonMember2024-01-012024-03-310000093389us-gaap:AdditionalPaidInCapitalMember2024-01-012024-03-310000093389us-gaap:CommonStockMember2024-03-310000093389us-gaap:AdditionalPaidInCapitalMember2024-03-310000093389us-gaap:RetainedEarningsMember2024-03-310000093389us-gaap:AccumulatedOtherComprehensiveIncomeMember2024-03-310000093389us-gaap:TreasuryStockCommonMember2024-03-310000093389us-gaap:ParentMember2024-03-310000093389us-gaap:NoncontrollingInterestMember2024-03-310000093389smp:NissensAutomotiveMember2024-11-012024-11-010000093389smp:NissensAutomotiveMember2025-01-012025-03-310000093389smp:SeparationProgramMember2025-03-310000093389smp:SeparationProgramMember2024-12-310000093389smp:SeparationProgramMember2025-01-012025-03-310000093389smp:SeparationProgramMemberus-gaap:OperatingSegmentsMembersmp:VehicleControlSegmentMember2025-01-012025-03-310000093389smp:SeparationProgramMemberus-gaap:OperatingSegmentsMembersmp:TemperatureControlSegmentMember2025-01-012025-03-310000093389smp:CostReductionInitiativeMember2025-03-310000093389us-gaap:EmployeeSeveranceMembersmp:CostReductionInitiativeMember2024-12-310000093389us-gaap:OtherRestructuringMembersmp:CostReductionInitiativeMember2024-12-310000093389smp:CostReductionInitiativeMember2024-12-310000093389us-gaap:EmployeeSeveranceMembersmp:CostReductionInitiativeMember2025-01-012025-03-310000093389us-gaap:OtherRestructuringMembersmp:CostReductionInitiativeMember2025-01-012025-03-310000093389smp:CostReductionInitiativeMember2025-01-012025-03-310000093389us-gaap:EmployeeSeveranceMembersmp:CostReductionInitiativeMember2025-03-310000093389us-gaap:OtherRestructuringMembersmp:CostReductionInitiativeMember2025-03-310000093389us-gaap:CustomerRelationshipsMember2025-03-310000093389us-gaap:CustomerRelationshipsMember2024-12-310000093389us-gaap:IntellectualPropertyMember2025-03-310000093389us-gaap:IntellectualPropertyMember2024-12-310000093389us-gaap:TrademarksAndTradeNamesMember2025-03-310000093389us-gaap:TrademarksAndTradeNamesMember2024-12-310000093389us-gaap:NoncompeteAgreementsMember2025-03-310000093389us-gaap:NoncompeteAgreementsMember2024-12-310000093389smp:SupplyAgreementMember2025-03-310000093389smp:SupplyAgreementMember2024-12-310000093389us-gaap:LeaseAgreementsMember2025-03-310000093389us-gaap:LeaseAgreementsMember2024-12-310000093389us-gaap:TrademarksAndTradeNamesMember2025-03-310000093389country:MX2025-01-012025-03-310000093389country:PL2025-01-012025-03-310000093389smp:MultiCurrencyRevolverMemberus-gaap:SecuredDebtMemberus-gaap:LineOfCreditMember2025-03-310000093389smp:MultiCurrencyRevolverMemberus-gaap:SecuredDebtMemberus-gaap:LineOfCreditMember2024-12-310000093389smp:U.S.DollarTermLoanMemberus-gaap:RevolvingCreditFacilityMemberus-gaap:LineOfCreditMember2025-03-310000093389smp:U.S.DollarTermLoanMemberus-gaap:RevolvingCreditFacilityMemberus-gaap:LineOfCreditMember2024-12-310000093389smp:EuroTermLoanMemberus-gaap:RevolvingCreditFacilityMemberus-gaap:LineOfCreditMember2025-03-310000093389smp:EuroTermLoanMemberus-gaap:RevolvingCreditFacilityMemberus-gaap:LineOfCreditMember2024-12-310000093389smp:DanishKronerRevolverMemberus-gaap:RevolvingCreditFacilityMemberus-gaap:LineOfCreditMember2025-03-310000093389smp:DanishKronerRevolverMemberus-gaap:RevolvingCreditFacilityMemberus-gaap:LineOfCreditMember2024-12-310000093389smp:PolishOverdraftFacilityAndOtherDebtMember2025-03-310000093389smp:PolishOverdraftFacilityAndOtherDebtMember2024-12-310000093389smp:A2024CreditAgreementMember2025-03-310000093389smp:A2024CreditAgreementMember2024-12-310000093389smp:EuroTermLoanMemberus-gaap:LineOfCreditMember2025-03-310000093389smp:EuroTermLoanMemberus-gaap:LineOfCreditMember2024-12-310000093389smp:PolishOverdraftFacilityMemberus-gaap:LineOfCreditMember2025-03-310000093389smp:PolishOverdraftFacilityMemberus-gaap:LineOfCreditMember2025-01-012025-03-310000093389smp:MultiCurrencyRevolvingCreditFacilityMemberus-gaap:RevolvingCreditFacilityMemberus-gaap:LineOfCreditMember2025-03-310000093389smp:TermLoanFacilityMemberus-gaap:RevolvingCreditFacilityMemberus-gaap:LineOfCreditMember2025-03-310000093389smp:PolishOverdraftFacilityAndOtherDebtMemberus-gaap:RevolvingCreditFacilityMemberus-gaap:LineOfCreditMember2025-03-310000093389us-gaap:AccumulatedTranslationAdjustmentMember2024-12-310000093389us-gaap:AccumulatedGainLossNetCashFlowHedgeParentMember2024-12-310000093389us-gaap:AccumulatedDefinedBenefitPlansAdjustmentMember2024-12-310000093389us-gaap:AccumulatedTranslationAdjustmentMember2025-01-012025-03-310000093389us-gaap:AccumulatedGainLossNetCashFlowHedgeParentMember2025-01-012025-03-310000093389us-gaap:AccumulatedDefinedBenefitPlansAdjustmentMember2025-01-012025-03-310000093389us-gaap:AccumulatedTranslationAdjustmentMember2025-03-310000093389us-gaap:AccumulatedGainLossNetCashFlowHedgeParentMember2025-03-310000093389us-gaap:AccumulatedDefinedBenefitPlansAdjustmentMember2025-03-310000093389us-gaap:AccumulatedTranslationAdjustmentMember2023-12-310000093389us-gaap:AccumulatedGainLossNetCashFlowHedgeParentMember2023-12-310000093389us-gaap:AccumulatedDefinedBenefitPlansAdjustmentMember2023-12-310000093389us-gaap:AccumulatedTranslationAdjustmentMember2024-01-012024-03-310000093389us-gaap:AccumulatedGainLossNetCashFlowHedgeParentMember2024-01-012024-03-310000093389us-gaap:AccumulatedDefinedBenefitPlansAdjustmentMember2024-01-012024-03-310000093389us-gaap:AccumulatedTranslationAdjustmentMember2024-03-310000093389us-gaap:AccumulatedGainLossNetCashFlowHedgeParentMember2024-03-310000093389us-gaap:AccumulatedDefinedBenefitPlansAdjustmentMember2024-03-310000093389smp:RestrictedAndPerformanceBasedSharesMember2024-12-310000093389smp:RestrictedAndPerformanceBasedSharesMember2025-01-012025-03-310000093389smp:RestrictedAndPerformanceBasedSharesMember2025-03-310000093389smp:RestrictedAndPerformanceBasedSharesMember2023-12-310000093389smp:RestrictedAndPerformanceBasedSharesMember2024-01-012024-03-310000093389smp:RestrictedAndPerformanceBasedSharesMember2024-03-310000093389smp:RestrictedAndPerformanceBasedSharesMembersmp:EmployeesMember2025-01-012025-03-310000093389smp:RestrictedAndPerformanceBasedSharesMembersrt:DirectorMember2025-01-012025-03-310000093389us-gaap:SupplementalEmployeeRetirementPlanDefinedBenefitMember2025-01-012025-03-310000093389smp:EmployeeStockOwnershipPlanAndTrustEsopMember2025-03-310000093389smp:EmployeeStockOwnershipPlanAndTrustEsopMember2025-01-012025-03-310000093389us-gaap:InterestRateSwapMember2025-03-310000093389us-gaap:InterestRateSwapMember2024-12-310000093389smp:NonDerivativeDebtInstrumentsMember2025-03-310000093389smp:NonDerivativeDebtInstrumentsMember2024-12-310000093389us-gaap:InterestRateSwapMemberus-gaap:CashFlowHedgingMember2025-03-310000093389us-gaap:InterestRateSwapMemberus-gaap:CashFlowHedgingMember2024-12-310000093389us-gaap:CashFlowHedgingMember2024-12-310000093389us-gaap:ForeignExchangeContractMemberus-gaap:NetInvestmentHedgingMemberus-gaap:DesignatedAsHedgingInstrumentMember2024-01-012024-12-310000093389us-gaap:ForeignExchangeContractMemberus-gaap:NetInvestmentHedgingMemberus-gaap:DesignatedAsHedgingInstrumentMember2024-12-310000093389smp:FairValueInputsLevel1AndLevel2Memberus-gaap:EstimateOfFairValueFairValueDisclosureMember2025-03-310000093389smp:FairValueInputsLevel1AndLevel2Memberus-gaap:CarryingReportedAmountFairValueDisclosureMember2025-03-310000093389smp:FairValueInputsLevel1AndLevel2Memberus-gaap:EstimateOfFairValueFairValueDisclosureMember2024-12-310000093389smp:FairValueInputsLevel1AndLevel2Memberus-gaap:CarryingReportedAmountFairValueDisclosureMember2024-12-310000093389us-gaap:FairValueInputsLevel1Memberus-gaap:EstimateOfFairValueFairValueDisclosureMember2025-03-310000093389us-gaap:FairValueInputsLevel1Memberus-gaap:CarryingReportedAmountFairValueDisclosureMember2025-03-310000093389us-gaap:FairValueInputsLevel1Memberus-gaap:EstimateOfFairValueFairValueDisclosureMember2024-12-310000093389us-gaap:FairValueInputsLevel1Memberus-gaap:CarryingReportedAmountFairValueDisclosureMember2024-12-310000093389us-gaap:FairValueInputsLevel2Memberus-gaap:EstimateOfFairValueFairValueDisclosureMember2025-03-310000093389us-gaap:FairValueInputsLevel2Memberus-gaap:CarryingReportedAmountFairValueDisclosureMember2025-03-310000093389us-gaap:FairValueInputsLevel2Memberus-gaap:EstimateOfFairValueFairValueDisclosureMember2024-12-310000093389us-gaap:FairValueInputsLevel2Memberus-gaap:CarryingReportedAmountFairValueDisclosureMember2024-12-310000093389smp:RestrictedAndPerformanceBasedSharesMember2025-01-012025-03-310000093389smp:RestrictedAndPerformanceBasedSharesMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:VehicleControlMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2025-01-012025-03-310000093389us-gaap:CorporateNonSegmentMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:VehicleControlMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2024-01-012024-03-310000093389us-gaap:CorporateNonSegmentMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:VehicleControlMember2025-03-310000093389us-gaap:OperatingSegmentsMembersmp:VehicleControlMember2024-12-310000093389us-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2025-03-310000093389us-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2024-12-310000093389us-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2025-03-310000093389us-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2024-12-310000093389us-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2025-03-310000093389us-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2024-12-310000093389us-gaap:CorporateNonSegmentMember2025-03-310000093389us-gaap:CorporateNonSegmentMember2024-12-310000093389us-gaap:OperatingSegmentsMembersmp:IgnitionEmissionsAndFuelDeliveryMembersmp:VehicleControlMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:IgnitionEmissionsAndFuelDeliveryMembersmp:VehicleControlMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:ElectricalAndSafetyMembersmp:VehicleControlMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:ElectricalAndSafetyMembersmp:VehicleControlMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:WireSetsAndOtherMembersmp:VehicleControlMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:WireSetsAndOtherMembersmp:VehicleControlMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:ACSystemComponentsMembersmp:TemperatureControlMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:ACSystemComponentsMembersmp:TemperatureControlMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:OtherThermalComponentsMembersmp:TemperatureControlMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:OtherThermalComponentsMembersmp:TemperatureControlMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:LightVehicleMembersmp:EngineeredSolutionsMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:LightVehicleMembersmp:EngineeredSolutionsMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:CommercialVehicleMembersmp:EngineeredSolutionsMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:CommercialVehicleMembersmp:EngineeredSolutionsMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:ConstructionAgricultureMembersmp:EngineeredSolutionsMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:ConstructionAgricultureMembersmp:EngineeredSolutionsMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:AllOtherMembersmp:EngineeredSolutionsMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:AllOtherMembersmp:EngineeredSolutionsMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:EngineCoolingMembersmp:NissensAutomotiveMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:EngineCoolingMembersmp:NissensAutomotiveMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:AirConditioningMembersmp:NissensAutomotiveMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:AirConditioningMembersmp:NissensAutomotiveMember2024-01-012024-03-310000093389us-gaap:OperatingSegmentsMembersmp:EngineEfficiencyMembersmp:NissensAutomotiveMember2025-01-012025-03-310000093389us-gaap:OperatingSegmentsMembersmp:EngineEfficiencyMembersmp:NissensAutomotiveMember2024-01-012024-03-310000093389country:USus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2025-01-012025-03-310000093389country:USus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2025-01-012025-03-310000093389country:USus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2025-01-012025-03-310000093389country:USus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2025-01-012025-03-310000093389country:USus-gaap:CorporateNonSegmentMember2025-01-012025-03-310000093389country:US2025-01-012025-03-310000093389smp:EuropeExcludingPolandMemberus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2025-01-012025-03-310000093389smp:EuropeExcludingPolandMemberus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2025-01-012025-03-310000093389smp:EuropeExcludingPolandMemberus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2025-01-012025-03-310000093389smp:EuropeExcludingPolandMemberus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2025-01-012025-03-310000093389smp:EuropeExcludingPolandMemberus-gaap:CorporateNonSegmentMember2025-01-012025-03-310000093389smp:EuropeExcludingPolandMember2025-01-012025-03-310000093389country:CAus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2025-01-012025-03-310000093389country:CAus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2025-01-012025-03-310000093389country:CAus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2025-01-012025-03-310000093389country:CAus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2025-01-012025-03-310000093389country:CAus-gaap:CorporateNonSegmentMember2025-01-012025-03-310000093389country:CA2025-01-012025-03-310000093389country:PLus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2025-01-012025-03-310000093389country:PLus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2025-01-012025-03-310000093389country:PLus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2025-01-012025-03-310000093389country:PLus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2025-01-012025-03-310000093389country:PLus-gaap:CorporateNonSegmentMember2025-01-012025-03-310000093389country:MXus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2025-01-012025-03-310000093389country:MXus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2025-01-012025-03-310000093389country:MXus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2025-01-012025-03-310000093389country:MXus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2025-01-012025-03-310000093389country:MXus-gaap:CorporateNonSegmentMember2025-01-012025-03-310000093389smp:OtherForeignMemberus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2025-01-012025-03-310000093389smp:OtherForeignMemberus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2025-01-012025-03-310000093389smp:OtherForeignMemberus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2025-01-012025-03-310000093389smp:OtherForeignMemberus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2025-01-012025-03-310000093389smp:OtherForeignMemberus-gaap:CorporateNonSegmentMember2025-01-012025-03-310000093389smp:OtherForeignMember2025-01-012025-03-310000093389country:USus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2024-01-012024-03-310000093389country:USus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2024-01-012024-03-310000093389country:USus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2024-01-012024-03-310000093389country:USus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2024-01-012024-03-310000093389country:USus-gaap:CorporateNonSegmentMember2024-01-012024-03-310000093389country:US2024-01-012024-03-310000093389smp:EuropeExcludingPolandMemberus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2024-01-012024-03-310000093389smp:EuropeExcludingPolandMemberus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2024-01-012024-03-310000093389smp:EuropeExcludingPolandMemberus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2024-01-012024-03-310000093389smp:EuropeExcludingPolandMemberus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2024-01-012024-03-310000093389smp:EuropeExcludingPolandMemberus-gaap:CorporateNonSegmentMember2024-01-012024-03-310000093389smp:EuropeExcludingPolandMember2024-01-012024-03-310000093389country:CAus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2024-01-012024-03-310000093389country:CAus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2024-01-012024-03-310000093389country:CAus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2024-01-012024-03-310000093389country:CAus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2024-01-012024-03-310000093389country:CAus-gaap:CorporateNonSegmentMember2024-01-012024-03-310000093389country:CA2024-01-012024-03-310000093389country:PLus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2024-01-012024-03-310000093389country:PLus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2024-01-012024-03-310000093389country:PLus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2024-01-012024-03-310000093389country:PLus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2024-01-012024-03-310000093389country:PLus-gaap:CorporateNonSegmentMember2024-01-012024-03-310000093389country:PL2024-01-012024-03-310000093389country:MXus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2024-01-012024-03-310000093389country:MXus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2024-01-012024-03-310000093389country:MXus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2024-01-012024-03-310000093389country:MXus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2024-01-012024-03-310000093389country:MXus-gaap:CorporateNonSegmentMember2024-01-012024-03-310000093389country:MX2024-01-012024-03-310000093389smp:OtherForeignMemberus-gaap:OperatingSegmentsMembersmp:VehicleControlMember2024-01-012024-03-310000093389smp:OtherForeignMemberus-gaap:OperatingSegmentsMembersmp:TemperatureControlMember2024-01-012024-03-310000093389smp:OtherForeignMemberus-gaap:OperatingSegmentsMembersmp:EngineeredSolutionsMember2024-01-012024-03-310000093389smp:OtherForeignMemberus-gaap:OperatingSegmentsMembersmp:NissensAutomotiveMember2024-01-012024-03-310000093389smp:OtherForeignMemberus-gaap:CorporateNonSegmentMember2024-01-012024-03-310000093389smp:OtherForeignMember2024-01-012024-03-310000093389smp:AsbestosRelatedDamagesMember2025-03-310000093389smp:AsbestosRelatedDamagesMember2001-09-012024-09-300000093389smp:AsbestosRelatedDamagesMembersrt:MinimumMember2024-08-310000093389smp:AsbestosRelatedDamagesMembersrt:MaximumMember2024-08-310000093389smp:AsbestosRelatedDamagesMembersrt:MinimumMember2023-09-012024-08-310000093389smp:AsbestosRelatedDamagesMembersrt:MaximumMember2023-09-012024-08-310000093389smp:AsbestosRelatedDamagesMember2024-09-300000093389smp:AsbestosRelatedDamagesMemberus-gaap:SegmentDiscontinuedOperationsMember2024-09-012024-09-300000093389smp:AsbestosRelatedLegalCostsMembersrt:MinimumMember2024-08-310000093389smp:AsbestosRelatedLegalCostsMembersrt:MaximumMember2024-08-310000093389smp:AsbestosRelatedDamagesAndLegalCostsMemberus-gaap:SegmentDiscontinuedOperationsMember2025-01-012025-03-310000093389smp:AsbestosRelatedDamagesAndLegalCostsMemberus-gaap:SegmentDiscontinuedOperationsMember2024-01-012024-03-31

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-Q

(Mark One)


þ			QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15 (d) OF THE SECURITIES EXCHANGE ACT OF 1934.

			For the quarterly period ended March 31, 2025

			or

o			TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934.

Commission file number: 001-04743

Standard Motor Products, Inc.

(Exact name of registrant as specified in its charter)

New York

11-1362020

(State or other jurisdiction of

incorporation or organization)

(I.R.S. Employer

Identification No.)


37-18 Northern Blvd., Long Island City, New York						11101
(Address of principal executive offices)						(Zip Code)

(718) 392-0200

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:


Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common Stock, par value $2.00 per share	SMP	New York Stock Exchange LLC

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes þ No o

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).

Yes þ No o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large Accelerated Filer

Accelerated Filer

Non-Accelerated Filer

Smaller reporting company

Emerging growth company

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes o No þ

As of the close of business on April 28, 2025, there were 21,981,023 outstanding shares of the registrant’s Common Stock, par value $2.00 per share.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

INDEX


	PART I - FINANCIAL INFORMATION

		Page No.
Item 1.	Consolidated Financial Statements:

	Consolidated Statements of Operations (Unaudited) for the Three Months Ended March 31, 2025 and 2024	3

	Consolidated Statements of Comprehensive Income (Unaudited) for the Three Months Ended March 31, 2025 and 2024	4

	Consolidated Balance Sheets as of March 31, 2025 (Unaudited) and December 31, 2024	5

	Consolidated Statements of Cash Flows (Unaudited) for the Three Months Ended March 31, 2025 and 2024	6

	Consolidated Statements of Changes in Stockholders’ Equity (Unaudited) for the Three Months Ended March 31, 2025 and 2024	7

	Notes to Consolidated Financial Statements (Unaudited)	8

Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	25

Item 3.	Quantitative and Qualitative Disclosures About Market Risk	36

Item 4.	Controls and Procedures	36

	PART II – OTHER INFORMATION

Item 1.	Legal Proceedings	37

Item 6.	Exhibits	37

Signatures		38

PART I – FINANCIAL INFORMATION

ITEM 1. CONSOLIDATED FINANCIAL STATEMENTS

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS


	Three Months Ended March 31,
(In thousands, except share and per share data, unaudited)	2025		2024
Net sales	$	413,379	$	331,403
Cost of sales	288,657		241,881
Gross profit	124,722		89,522
Selling, general and administrative expenses	99,845		74,733
Restructuring and integration expenses	673		192
Other income, net	258		22
Operating income	24,462		14,619
Other non-operating income, net	2,248		819
Interest expense	7,761		2,067
Earnings from continuing operations before income taxes	18,949		13,371
Provision for income taxes	5,069		3,342
Earnings from continuing operations	13,880		10,029
Loss from discontinued operations, net of income taxes	(1,139)		(1,039)
Net earnings	12,741		8,990
Net earnings attributable to noncontrolling interest	175		166
Net earnings attributable to SMP (a)	$	12,566	$	8,824

Net earnings (loss) attributable to SMP
Continuing operations	$	13,705	$	9,863
Discontinued operations	(1,139)		(1,039)
Net earnings attributable to SMP	$	12,566	$	8,824

Per common share data
Basic:
Continuing operations	$	0.63	$	0.45
Discontinued operations	(0.06)		(0.05)
Net earnings attributable to SMP per common share	$	0.57	$	0.40

Diluted:
Continuing operations	$	0.61	$	0.44
Discontinued operations	(0.05)		(0.05)
Net earnings attributable to SMP per common share	$	0.56	$	0.39

Dividend declared per common share	$	0.31	$	0.29

Weighted average number of common shares, basic	21,886,810		21,923,830
Weighted average number of common shares, diluted	22,319,868		22,372,543

(a)Throughout this Form 10-Q, “SMP” refers to Standard Motor Products, Inc. and subsidiaries.

See accompanying notes to consolidated financial statements (unaudited).

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME


	Three Months Ended March 31,
(In thousands, unaudited)	2025		2024
Net earnings	$	12,741	$	8,990
Other comprehensive income (loss), net of tax:
Foreign currency translation	12,979		(1,224)
Cash flow hedges	(836)		1,391
Postretirement benefit plans	(2)		(3)
Total other comprehensive income, net of tax	12,141		164
Total comprehensive income	24,882		9,154
Comprehensive income (loss) attributable to noncontrolling interest, net of tax:
Net earnings	175		166
Foreign currency translation	(36)		(4)
Comprehensive income attributable to noncontrolling interest, net of tax	139		162
Comprehensive income attributable to SMP	$	24,743	$	8,992

See accompanying notes to consolidated financial statements (unaudited).

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS


(In thousands, except share and per share data)	March 31, 2025		December 31, 2024
ASSETS	(Unaudited)
CURRENT ASSETS:
Cash and cash equivalents	$	50,276	$	44,426
Accounts receivable, less allowances for discounts and expected credit losses of $7,157 and $5,472 for 2025 and 2024, respectively	280,795		210,719
Inventories	641,131		624,913
Unreturned customer inventories	17,597		16,163
Prepaid expenses and other current assets	26,282		25,703
Total current assets	1,016,081		921,924

Property, plant and equipment, net of accumulated depreciation of $279,885 and $273,264 for 2025 and 2024, respectively	174,636		168,735
Operating lease right-of-use assets	112,022		109,899
Goodwill	246,115		241,418
Customer relationships intangibles, net	212,378		210,430
Other intangibles, net	93,087		90,540
Deferred income taxes	14,064		13,199
Investments in unconsolidated affiliates	26,013		24,842
Other assets	31,695		33,139
Total assets	$	1,926,091	$	1,814,126
LIABILITIES AND STOCKHOLDERS’ EQUITY
CURRENT LIABILITIES:
Current portion of revolving credit facility	$	4,350	$	10,800
Current portion of term loan and other debt	18,876		16,317
Accounts payable	151,206		148,009
Sundry payables and accrued expenses	81,036		84,936
Accrued customer returns	66,087		46,471
Accrued core liability	11,722		12,807
Accrued rebates	73,050		76,168
Payroll and commissions	31,050		40,964
Total current liabilities	437,377		436,472

Long-term debt	627,329		535,197
Noncurrent operating lease liabilities	99,885		98,214
Other accrued liabilities	29,135		29,593
Accrued asbestos liabilities	79,928		84,568
Total liabilities	1,273,654		1,184,044
Commitments and contingencies
Stockholders’ equity:
Common stock – par value $2.00 per share:
Authorized – 30,000,000 shares; issued 23,936,036 shares	47,872		47,872
Capital in excess of par value	99,547		100,135
Retained earnings	581,174		575,385
Accumulated other comprehensive income	(13,655)		(25,832)
Treasury stock – at cost (1,955,013 shares and 2,077,877 shares in 2025 and 2024, respectively)	(76,977)		(81,815)
Total SMP stockholders’ equity	637,961		615,745
Noncontrolling interest	14,476		14,337
Total stockholders’ equity	652,437		630,082
Total liabilities and stockholders’ equity	$	1,926,091	$	1,814,126

See accompanying notes to consolidated financial statements (unaudited).

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS


(In thousands, unaudited)	Three Months Ended March 31,
	2025		2024
CASH FLOWS FROM OPERATING ACTIVITIES:
Net earnings	$	12,741	$	8,990
Adjustments to reconcile net earnings to net cash used in operating activities:
Depreciation and amortization	10,267		7,301
Amortization of deferred financing cost	327		120
Increase to allowance for expected credit losses	1,614		191
Increase to inventory reserves	1,843		1,068
Equity income from joint ventures	(1,084)		(694)
Employee stock ownership plan allocation	675		697
Stock-based compensation	1,550		1,270
Increase in deferred income taxes	(16)		(180)
Loss on discontinued operations, net of tax	1,139		1,039
Change in assets and liabilities:
Increase in accounts receivable	(68,882)		(43,978)
Increase in inventories	(14,576)		(14,670)
Decrease in prepaid expenses and other current assets	1,438		1,649
Increase (decrease) in accounts payable	957		(9,274)
(Decrease) increase in sundry payables and accrued expenses	(3,185)		3,988
Net change in other assets and liabilities	(5,028)		(3,233)
Net cash used in operating activities	(60,220)		(45,716)

CASH FLOWS FROM INVESTING ACTIVITIES:
Capital expenditures	(9,132)		(10,086)
Other investing activities	2,923		15
Net cash used in investing activities	(6,209)		(10,071)

CASH FLOWS FROM FINANCING ACTIVITIES:
Repayments of term loans	(3,853)		(1,250)
Net borrowings under revolving credit facilities	80,962		59,950
Net borrowings (repayments) of other debt and lease obligations	1,985		(8)
Purchase of treasury stock	—		(2,235)
Increase in overdraft balances	191		315
Dividends paid	(6,777)		(6,392)
Net cash provided by financing activities	72,508		50,380
Effect of exchange rate changes on cash	(229)		(6)
Net increase (decrease) in cash and cash equivalents	5,850		(5,413)
CASH AND CASH EQUIVALENTS at beginning of period	44,426		32,526
CASH AND CASH EQUIVALENTS at end of period	$	50,276	$	27,113

Supplemental disclosure of cash flow information:
Cash paid during the period for:
Interest	$	7,846	$	2,241
Income taxes	$	3,866	$	3,532

See accompanying notes to consolidated financial statements (unaudited).

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENT OF CHANGES IN STOCKHOLDERS’ EQUITY

Three Months Ended March 31, 2025


(In thousands, unaudited)	Common Stock		Capital in Excess of Par Value		Retained Earnings		Accumulated Other Comprehensive Income (Loss)		Treasury Stock		Total SMP		Non- Controlling Interest		Total
Balance at December 31, 2024	$	47,872	$	100,135	$	575,385	$	(25,832)	$	(81,815)	$	615,745	$	14,337	$	630,082
Net earnings	—		—		12,566		—		—		12,566		175		12,741
Other comprehensive income (loss), net of tax	—		—		—		12,177		—		12,177		(36)		12,141
Cash dividends paid	—		—		(6,777)		—		—		(6,777)		—		(6,777)
Stock-based compensation	—		149		—		—		1,401		1,550		—		1,550
Employee Stock Ownership Plan	—		(737)		—		—		3,437		2,700		—		2,700
Balance at March 31, 2025	$	47,872	$	99,547	$	581,174	$	(13,655)	$	(76,977)	$	637,961	$	14,476	$	652,437

Three Months Ended March 31, 2024


(In thousands, unaudited)	Common Stock		Capital in Excess of Par Value		Retained Earnings		Accumulated Other Comprehensive Income (Loss)		Treasury Stock		Total SMP		Non- Controlling Interest		Total
Balance at December 31, 2023	$	47,872	$	101,751	$	573,226	$	(5,974)	$	(81,811)	$	635,064	$	15,809	$	650,873
Net earnings	—		—		8,824		—		—		8,824		166		8,990
Other comprehensive income (loss), net of tax	—		—		—		168		—		168		(4)		164
Cash dividends paid	—		—		(6,392)		—		—		(6,392)		—		(6,392)
Purchase of treasury stock	—		—		—		—		(2,571)		(2,571)		—		(2,571)
Stock-based compensation	—		950		—		—		320		1,270		—		1,270
Employee Stock Ownership Plan	—		3		—		—		2,784		2,787		—		2,787
Balance at March 31, 2024	$	47,872	$	102,704	$	575,658	$	(5,806)	$	(81,278)	$	639,150	$	15,971	$	655,121

See accompanying notes to consolidated financial statements (unaudited).

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 1. Basis of Presentation

Standard Motor Products, Inc. and its subsidiaries (referred to hereinafter in these notes to the consolidated financial statements as “we,” “us,” “our,” “SMP,” or the “Company”) is a leading manufacturer and distributor of premium replacement parts in the automotive aftermarket, and a custom-engineered solutions provider to vehicle and equipment manufacturers in diverse non-aftermarket end markets. Our automotive aftermarket is comprised of three segments, Vehicle Control, Temperature Control and Nissens Automotive, while our Engineered Solutions segment offers a broad array of conventional and future-oriented technologies in markets for commercial and light vehicles, construction, agriculture, power sports, marine, hydraulics and lawn and garden. We sell our products primarily to retailers, warehouse distributors, original equipment manufacturers and original equipment service part operations in the United States, Europe, Canada, Mexico, and other foreign countries. In addition to our legacy SMP business, we acquired our fourth business segment, European automotive aftermarket parts supplier AX V Nissens III ApS (now known as SMP Nissens III ApS) and its direct and indirect subsidiaries (“Nissens Automotive”), in the fourth quarter of 2024. Nissens Automotive develops, manufactures and markets products within the areas of engine cooling, air conditioning climate systems, and engine efficiency within the automotive aftermarket industry, primarily in Europe. For further information and disclosures regarding the Nissens Automotive acquisition, refer to Note 3, “Business Combinations.”

These unaudited consolidated financial statements include our accounts and all entities that we control. In addition, we use the equity method to include our share of the results of investments in unconsolidated affiliates in which we do not have a controlling financial interest but have the ability to exercise significant influence. Generally our ownership in these unconsolidated affiliates is 50% or less. All significant inter-company items have been eliminated.

These unaudited consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States (“U.S. GAAP”) for interim financial information and with the instructions to Form 10-Q and Rule 10-01 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by U.S. GAAP for complete financial statements and should be read in conjunction with the audited consolidated financial statements and the notes thereto included in our Annual Report on Form 10-K for the year ended December 31, 2024. In the opinion of management, all adjustments (consisting of normal recurring adjustments) considered necessary for a fair statement have been included. The results of operations for the interim periods are not necessarily indicative of the results of operations for the entire year.

Note 2. Summary of Significant Accounting Policies

The preparation of consolidated annual and quarterly financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amount of assets and liabilities, the disclosure of contingent assets and liabilities at the date of our consolidated financial statements, and the reported amounts of revenue and expenses during the reporting periods. We have made a number of estimates and assumptions in the preparation of these consolidated financial statements. We can give no assurance that actual results will not differ from those estimates. Although we do not believe that there is a reasonable likelihood that there will be a material change in the future estimates, or in the assumptions that we use in calculating the estimates, the uncertain future effects, if any, of disruptions in the supply chain caused by geo-political risks, future increases in interest rates, inflation, macroeconomic uncertainty, and other unforeseen changes in the industry, or business, could materially impact the estimates, and may have a material adverse effect on our business, financial condition and results of operations. Some of the more significant estimates include allowances for expected credit losses, cash discounts, valuation of inventory, valuation of long-lived assets, goodwill and other intangible assets, depreciation and amortization of long-lived assets, product liability exposures, asbestos, environmental and litigation matters, valuation of deferred tax assets, share based compensation and sales returns and other allowances.

There have been no material changes to our critical accounting policies and estimates from the information provided in Note 1 of the notes to our consolidated financial statements in our Annual Report on Form 10-K for the year ended December 31, 2024.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Recently Issued Accounting Pronouncements

Standards not yet adopted as of March 31, 2025

Improvements to Income Tax Disclosures

In December 2023, the FASB issued ASU 2023-09, Income Taxes (Topic 270): Improvements to Income Tax Disclosures. This accounting standards update will improve transparency and decision making usefulness of income tax disclosures primarily with the expansion of the:

(a)annual income effective tax rate reconciliation to include disclosure of (i) eight specific categories of rate reconciling items; (ii) additional information for reconciling items that meet or exceed a quantitative threshold; and (iii) expand the required disclosures to include reconciling percentages as well as reported amounts; and

(b)annual disclosures of income taxes paid to include the disaggregation by federal, state and foreign jurisdictions.

The ASU is effective for annual reporting periods beginning after December 15, 2024, which for us is January 1, 2025, with full retrospective application required to all prior periods presented. Early adoption is permitted.

We are currently evaluating the full impact of adopting ASU 2023-09 on our consolidated financial statements, disclosures, processes and controls. We will adopt the guidance with our annual reporting for the year ended December 31, 2025.

Disaggregation of Income Statement Expenses

In November 2024, the FASB issued ASU 2024-03, Income Statement - Reporting Comprehensive Income - Expense Disaggregation Disclosures (Subtopic 220-40). This accounting standards update seeks to provide investors and users of the financial statements with clearer information regarding companies' cost structures by disaggregating expense line items in the income statement. ASU 2024-03 requires tabular disclosure in the notes to the financial statements, at each interim and annual reporting period, of certain types of expenses (including purchases of inventory, employee compensation, depreciation and intangible asset amortization) that are already included in commonly presented expense captions on the income statement within continuing operations, and qualitative description of remaining amounts not separately disaggregated quantitatively. Furthermore, the guidance requires disclosure of the total amount of selling expenses and, in annual reporting periods, an entity’s definition of selling expenses.

ASU 2024-03 is effective for annual reporting periods beginning after December 15, 2026 and interim periods beginning after December 15, 2027, which for us is January 1, 2027 and January 1, 2028, respectively. The requirements will be applied prospectively with the option for retrospective application. Early adoption is permitted.

This new standard, once adopted, will require us to disclose expenses in a more detailed and granular way than we do in these consolidated financial statements. We are currently evaluating the full impact of adopting ASU 2024-03 on our consolidated financial statements, disclosures, processes and controls. We will adopt the guidance when it becomes effective.

We have reviewed all other recently issued accounting pronouncements and concluded they were either not applicable or not expected to have a material impact on the Company’s consolidated financial statements.

Note 3. Business Combinations

Acquisition of Nissens Automotive

On November 1, 2024, we acquired all the issued and outstanding shares of European automotive aftermarket parts supplier, Nissens Automotive for €366.8 million (approximately $397.1 million). The purchase price allocation was finalized during the quarter ended March 31, 2025, and there were no adjustments to amounts previously disclosed in Note 2 of the notes to our consolidated financial statements in our Annual Report on Form 10-K for the year ended December 31, 2024.

During the quarter ended March 31, 2025, we incurred additional closing and other acquisition related costs of $0.6 million recorded as selling, general and administrative costs within the statements of operations.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Note 4. Restructuring and Integration Expenses

Separation Program

During the second quarter of 2024 we offered a voluntary retirement incentive package of severance and other benefit enhancements to eligible employees in the United States and Canada as part of our commitment to optimizing our cost structure and providing professional development opportunities to our employees. The offer period ended on June 14, 2024. In the third quarter of 2024, we expanded the program to include involuntary separations. Costs primarily comprise of compensation expense and enhanced medical benefits, and are charged to restructuring and integration expenses in our statements of operations as a one-time termination benefit. Voluntary retirement incentive costs were recognized when the employee accepted the offer or over their remaining period of service based on the agreed retirement date. Involuntary separation costs were recognized when the respective criteria were met and costs were recorded either during the third quarter of 2024 or over the remaining service period for the affected employees. We anticipate that the program will be substantially complete by the end of 2027. Additional restructuring costs related to the initiative are expected to be immaterial. The total restructuring expenses recorded to date are $7.5 million.

Activity for the three months ended March 31, 2025 related to the separation program workforce reduction consisted of the following (in thousands):


Exit activity liability at December 31, 2024	$	4,776
Restructuring and integration costs:
Amounts provided for during 2025 (a)	385
Cash payments	(1,898)
Exit activity liability at March 31, 2025	$	3,263

(a)Restructuring and integration expenses incurred during the three months ended March 31, 2025 consist of $0.3 million in our Vehicle Control segment, and $0.1 million in our Temperature Control segment.

Cost Reduction Initiative

During the fourth quarter of 2022, to further our ongoing efforts to improve operating efficiencies and reduce costs, we announced plans for a reduction in our sales force, and initiated plans to relocate certain product lines from our Independence, Kansas manufacturing facility and from our St. Thomas, Canada manufacturing facility to our manufacturing facilities in Reynosa, Mexico. In 2025, we extended the program for plans to relocate additional product lines from certain plants in the United States and Canada to our existing manufacturing facilities in Mexico. We anticipate that the Cost Reduction Initiative will be substantially complete by the end of 2026. Additional restructuring costs related to the initiative are expected to be immaterial. The total restructuring expenses recorded to date are $4.9 million.

Activity for the three months ended March 31, 2025 related to the cost reduction initiative consisted of the following (in thousands):


	Workforce Reduction		Other Exit Costs		Total
Exit activity liability at December 31, 2024	$	232	$	—	$	232
Restructuring and integration costs:
Amounts provided for during 2025 (a)	178		110		288
Cash payments	(57)		(110)		(167)
Exit activity liability at March 31, 2025	$	353	$	—	$	353

(a)All the restructuring and integration expenses incurred during the three months ended March 31, 2025 were in our Vehicle Control segment.

Restructuring and integration activities are included within “sundry payables and accrued expenses” and “other accrued liabilities” in the consolidated balance sheet.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Note 5. Sale of Receivables

We are party to several supply chain financing arrangements, in which we may sell certain of our customers’ trade accounts receivable to such customers’ financial institutions. We sell our undivided interests in certain of these receivables at our discretion when we determine that the cost of these arrangements is less than the cost of servicing our receivables with existing debt. Under the terms of the agreements, we retain no rights or interest, have no obligations with respect to the sold receivables, and do not service the receivables after the sale. As such, these transactions are accounted for as a sale.

Pursuant to these agreements, we sold $184.6 million and $170.8 million of receivables during the three months ended March 31, 2025 and 2024, respectively. Receivables presented at financial institutions and not yet collected as of March 31, 2025 were approximately $4.7 million and remained in our accounts receivable balance as of that date. All receivables sold were reflected as a reduction of accounts receivable in the consolidated balance sheet at the time of sale. A charge in the amount of $9.3 million and $10 million related to the sale of receivables was included in selling, general and administrative expenses in our consolidated statements of operations for the three months ended March 31, 2025 and 2024, respectively.

To the extent that these arrangements are terminated, our financial condition, results of operations, cash flows and liquidity could be adversely affected by extended payment terms, or delays or failures in collecting trade accounts receivable. The utility of the supply chain financing arrangements also depends upon a benchmark reference rate for the purpose of determining the discount rate applicable to each arrangement. If the benchmark reference rate increases significantly, we may be negatively impacted as we may not be able to pass these added costs on to our customers, which could have a material and adverse effect upon our financial condition, results of operations and cash flows.

Note 6. Inventories

Inventories, which are stated at the lower of cost (determined by means of the first-in, first-out method) and net realizable value, consist of the following (in thousands):


	March 31, 2025		December 31, 2024
Finished goods	$	406,286	$	394,852
Work in process	22,330		22,053
Raw materials	212,515		208,008
Subtotal	641,131		624,913
Unreturned customer inventories	17,597		16,163
Total inventories	$	658,728	$	641,076

Note 7. Acquired Intangible Assets

Acquired identifiable intangible assets consist of the following (in thousands):


	March 31, 2025		December 31, 2024
Customer relationships	$	309,140	$	303,547
Patents, developed technology and intellectual property	14,123		14,123
Trademarks and trade names	85,248		82,220
Non-compete agreements	3,292		3,308
Supply agreements	800		800
Leaseholds	160		160
Total acquired intangible assets	412,763		404,158
Less: accumulated amortization (a)	(110,227)		(106,304)
Net acquired intangible assets	$	302,536	$	297,854

(a)Applies to all intangible assets, except for trademarks and trade names totaling $77.9 million, which have indefinite useful lives and, as such, are not being amortized.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Total amortization expense for acquired intangible assets was $4.4 million and $2.1 million for the three months ended March 31, 2025 and 2024, respectively. Based on the current estimated useful lives assigned to our intangible assets, amortization expense is estimated to be $13.1 million for the remainder of 2025, $17.5 million in 2026, $17.5 million in 2027, $17.5 million in 2028 and $159.0 million in the aggregate for the years 2029 through 2041.

Note 8. Leases

We have operating and finance leases for our manufacturing facilities, warehouses, office space, automobiles, and certain equipment. Our leases have remaining lease terms of up to nine years, some of which may include one or more five-year renewal options. We have not included any of the renewal options in our operating lease payments as we concluded that it is not reasonably certain that we will exercise any of these renewal options. Leases with an initial term of twelve months or less are not recorded on the balance sheet. Operating lease expense is recognized on a straight-line basis over the lease term. Finance leases are not material.

The following tables provide quantitative disclosures related to our operating leases and include all operating leases acquired from the date of acquisition (in thousands, except where otherwise indicated):


Balance Sheet Information	March 31, 2025			December 31, 2024
Assets
Operating lease right-of-use assets	$	112,022		$	109,899

Liabilities
Sundry payables and accrued expenses	$	20,767		$	19,992
Noncurrent operating lease liabilities	99,885			98,214
Total operating lease liabilities	$	120,652		$	118,206

Weighted Average Remaining Lease Term	7.5 Years			7.7 Years
Weighted Average Discount Rate	5.1		%	5.0		%


	Three Months Ended March 31,
Lease Expense	2025		2024
Lease expense	$	6,223	$	4,820
Variable and other lease expense (a)	1,728		780
Total lease costs	$	7,951	$	5,600

(a)Variable and other lease expense relate to non-lease components such as maintenance, property taxes, etc., and operating lease expense for leases with an initial term of 12 months or less which are not material.


	Three Months Ended March 31,
	2025		2024
Supplemental Cash Flow Information
Cash paid for the amounts included in the measurement of lease liabilities	$	5,819	$	4,131
Right-of-use assets obtained in exchange for new lease obligations (a)	$	6,420	$	5,628

(a)Includes $5.7 million related to the lease modification and extension for our manufacturing facility in Reynosa, Mexico and $4.7 million of right-of-use assets related to the lease modification and extension for our manufacturing facility in Bialystok, Poland during the three months ended March 31, 2025 and 2024 respectively

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Minimum Lease Payments

At March 31, 2025, we are obligated to make minimum lease payments through 2034, under operating leases, which are as follows:


2025	$	16,132
2026	20,572
2027	18,286
2028	15,722
2029	15,041
Thereafter	61,674
Total lease payments	$	147,427
Less: Interest	(26,775)
Present value of lease liabilities	$	120,652

Note 9. Credit Facilities and Long-Term Debt

Total debt outstanding is summarized as follows (in thousands):


	March 31,		December 31,
	2025		2024
2024 Credit Agreement (a)
Multi-currency revolver	324,736		244,171
U.S. dollar term loan(b)	195,924		198,287
Euro term loan(b)	105,973		102,908
Danish revolver	4,350		—
Other	19,572		16,948
Total debt	$	650,555	$	562,314

Current maturities of debt	$	23,226	$	27,117
Long-term debt	627,329		535,197
Total debt	$	650,555	$	562,314

(a) Weighted average interest rate, adjusted for the impact of interest rate swap agreements, is 5.4% and 5.6% at March 31, 2025 and December 31, 2024, respectively. Interest rates primarily consist of Term SOFR for borrowings in U.S. dollars and EURIBOR for borrowings in euros.

(b) Amounts are shown net of unamortized deferred financing costs of $2.5 million at March 31, 2025 and $2.7 million at December 31, 2024.

2024 Credit Agreement

Outstanding borrowings at March 31, 2025 under the 2024 Credit Agreement were $631 million, net of deferred financing costs, consisting of current borrowings of $19.1 million and long-term debt of $611.9 million; while outstanding borrowings at December 31, 2024 were $545.4 million, net of deferred financing costs, consisting of current borrowings of $25.2 million and long-term debt of $520.1 million. Letters of credit outstanding under the credit agreements were $2.5 million at both March 31, 2025 and December 31, 2024.

The 2024 Credit Agreement contains customary covenants limiting, among other things, the incurrence of additional indebtedness, the creation of liens, mergers, consolidations, liquidations and dissolutions, sales of assets, dividends and other payments in respect of equity interests, acquisitions, investments, loans and guarantees, subject, in each case, to customary exceptions, thresholds and baskets. The Company is in compliance with its debt covenants. The 2024 Credit Agreement also contains customary events of default.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Polish Overdraft Facility

The Company has an overdraft facility that provides for borrowings of up to Polish zloty 30 million (approximately $7.8 million) if borrowings are solely in Polish zloty, or up to 85% of the Polish zloty 30 million limit (approximately $6.6 million) if borrowings are in euros and/or U.S. dollars. The overdraft facility automatically renews every three months until June 2027, subject to cancellation by either party, at its sole discretion, at least 30 days prior to the commencement of the three-month renewal period. There were no borrowings outstanding under the overdraft facility at March 31, 2025 and December 31, 2024.

Maturities of Debt

As of March 31, 2025, maturities of debt, net of unamortized deferred financing costs, through 2038, assuming no prepayments, are as follows (in thousands):


	Multi-Currency Revolver		U.S. Dollar Term Loan		Euro Term Loan		Danish Revolver		Other Debt		Total
Remainder of 2025	$	—	$	7,153	$	3,864	$	—	$	3,872	$	14,889
2026	—		9,606		5,190		—		1,192		15,988
2027	—		14,655		7,923		—		1,296		23,874
2028	—		19,703		10,655		—		1,225		31,583
2029	324,736		144,807		78,340		4,350		1,264		553,497
Thereafter	—		—		—		—		10,724		10,724
Total	$	324,736	$	195,924	$	105,973	$	4,350	$	19,572	$	650,555
Less: current maturities	—		(9,549)		(5,158)		(4,350)		(4,169)		(23,226)
Long-term debt	$	324,736	$	186,375	$	100,814	$	—	$	15,404	$	627,329

Deferred Financing Costs

Deferred financing costs of $4.5 million related to our term loans and revolving credit facilities as of March 31, 2025, assuming no prepayments, are being amortized in the amounts of $0.9 million for the remainder of 2025, $1.1 million in 2026, $1.0 million in 2027, $0.9 million in 2028, and $0.6 million in 2029.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Note 10. Accumulated Other Comprehensive Income Attributable to SMP


	Three Months Ended March 31, 2025
(in thousands)	Foreign Currency Translation			Cash Flow Hedges			Postretirement Benefit Plans			Total
Balance at December 31, 2024	$	(29,769)		$	3,924		$	13		$	(25,832)
Other comprehensive income (loss) before reclassifications	10,881		(d)	(1,542)		(a)	—			9,339
Amounts reclassified from accumulated other comprehensive income	—			412		(b)	(4)		(c)	408
Net other comprehensive income (loss)	10,881			(1,130)			(4)			9,747
Tax amounts	2,134			294			2			2,430
Balance at March 31, 2025	$	(16,754)		$	3,088		$	11		$	(13,655)


	Three Months Ended March 31, 2024
(in thousands)	Foreign Currency Translation		Cash Flow Hedges			Postretirement Benefit Plans			Total
Balance at December 31, 2023	$	(8,897)	$	2,899		$	24		$	(5,974)
Other comprehensive income (loss) before reclassifications	(1,220)		1,209		(a)	—			(11)
Amounts reclassified from accumulated other comprehensive income	—		671		(b)	(4)		(c)	667
Net other comprehensive income (loss)	(1,220)		1,880			(4)			656
Tax amounts	—		(489)			1			(488)
Balance at March 31, 2024	$	(10,117)	$	4,290		$	21		$	(5,806)

(a)Consists of the unrecognized loss relating to the change in fair value of cash flow interest rate hedges of $1.1 million ($0.8 million, net of tax) and $1.9 million ($1.4 million, net of tax) in the three months ended March 31, 2025 and 2024, respectively and cash settlement receipts of $0.4 million ($0.3 million, net of tax) and $0.7 million ($0.5 million, net of tax) in the three months ended March 31, 2025 and 2024, respectively.

(b)Unrecognized accumulated other comprehensive income (loss) related to cash flow interest rate hedges are reclassified to earnings and reported in interest expense in our consolidated statements of operations when the interest payments on the underlying borrowings are recognized.

(c)Unrecognized accumulated other comprehensive income (loss) related to our postretirement benefit plans is reclassified to earnings and included in the computation of net periodic postretirement benefit costs, which are included in other non-operating income, net in our consolidated statements of operations.

(d)Foreign currency translation primarily reflects the appreciation of the Danish kroner and the Polish zloty.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Note 11. Stock-Based Compensation Plans

Our restricted and performance-based share activity was as follows for the three months ended March 31, 2025 and 2024:


	Shares	Weighted Average Grant Date Fair Value Per Share
Balance at December 31, 2024	929,024	$	26.82
Granted	—	—
Vested	(35,564)	27.15
Forfeited	(1,721)	27.87
Balance at March 31, 2025	891,739	$	26.86


	Shares	Weighted Average Grant Date Fair Value Per Share
Balance at December 31, 2023	880,976	$	29.48
Granted	—	—
Vested	(7,928)	27.70
Forfeited	(7,150)	32.47
Balance at March 31, 2024	865,898	$	29.47

We recorded compensation expense related to restricted shares and performance-based shares of $1.6 million ($1.1 million, net of tax) and $1.3 million ($1 million, net of tax) for the three months ended March 31, 2025 and 2024, respectively, primarily in selling, general and administrative expenses within our consolidated statements of operations. The unrecognized compensation expense related to our restricted and performance-based shares was $11.9 million at March 31, 2025, and is expected to be recognized as they vest over a weighted average period of 3.5 years and 1 month for employees and directors, respectively.

Note 12. Employee Benefits

We maintain a defined contribution Supplemental Executive Retirement Plan for key employees. Under the plan, these employees may elect to defer a portion of their compensation and, in addition, we may at our discretion make contributions to the plan on behalf of the employees. In the three months ended March 31, 2025, we made company contributions to the plan of $0.3 million related to calendar year 2024.

We also have an Employee Stock Ownership Plan and Trust for employees who are not covered by a collective bargaining agreement. In connection therewith, we maintain an employee benefits trust to which we contribute shares of treasury stock. We are authorized to instruct the trustees to distribute such shares toward the satisfaction of our future obligations under the plan. The shares held in trust are not considered outstanding for purposes of calculating earnings per share until they are committed to be released. The trustees will vote the shares in accordance with their fiduciary duties. During the three months ended March 31, 2025, we contributed to the trust an additional 87,300 shares from our treasury and released 87,300 shares from the trust leaving 200 shares remaining in the trust as of March 31, 2025.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Note 13. Derivative Instruments

As part of our risk management strategy, we occasionally use derivative instruments, including interest rate swaps, forward foreign exchange contracts and non-derivative instruments such as foreign currency denominated debt, to reduce our market risk for changes in interest rates and to manage foreign exchange rate risk. There have been no material changes during the three months ended March 31, 2025 to our risk management policies, strategies, types of instruments and valuation techniques used in measuring fair value from the information provided in Note 17 of the notes to our consolidated financial statements in our Annual Report on Form 10-K for the year ended December 31, 2024.

The notional amounts of financial instruments used to hedge the above risks are as follows (in millions):


	March 31, 2025		December 31, 2024
Interest rate swaps	$	208	$	204
Non-derivative debt instruments	$	206	$	203

We do not offset derivative assets against liabilities in master netting agreements and there were no receivables or payables recognized on receipt or payment of cash collateral at March 31, 2025 and December 31, 2024.

Cash Flow Hedges

The fair value of interest rate swap agreements designated as cash flow hedges of interest rate risk are as follows (in thousands):


	March 31, 2025		December 31, 2024
Derivative assets	$	4,249	$	5,409
Derivative liabilities	$	71	$	101

Gains/losses are deferred and recorded in accumulated other comprehensive income, net of income taxes, in our consolidated balance sheet. When the hedged interest payment on the underlying borrowing is recognized in interest expense, the respective deferred gain/loss in accumulated other comprehensive income is reclassified to earnings as interest expense in the consolidated statements of operations. We expect to reclassify a net gain of $1.2 million from accumulated other comprehensive income in the next twelve months. We perform quarterly hedge effectiveness assessments and anticipate that the interest rate swap will be highly effective throughout its term. If it becomes probable that the hedged interest payment(s) will not occur, we immediately recognize the related deferred hedging gains/losses in earnings. There were no such reclassifications during the three months ended March 31, 2025.

Net Investment Hedge

Foreign exchange remeasurement gains/losses on euro-denominated debt designated as a hedge of our net investment in Nissens Automotive's foreign operations whose functional currency is Danish kroner, are recorded as a currency translation adjustment in accumulated other comprehensive income in the consolidated balance sheet, provided the net investment hedge is highly effective. The gains/losses will subsequently be reclassified into earnings when the hedged net investment is either sold or substantially liquidated. We recognized a loss of $8.2 million as a currency translation adjustment in other comprehensive income in the three months ended March 31, 2025. No gains or losses related to the net investment hedge were recognized in earnings in 2024.

Note 14. Fair Value Measurements

We follow a three-level fair value hierarchy that prioritizes the inputs to measure fair value. This hierarchy requires entities to maximize the use of “observable inputs” and minimize the use of “unobservable inputs.” The three levels of inputs used to measure fair value are as follows:

Level 1: Quoted prices (unadjusted) for identical assets or liabilities in active markets as of the measurement date.

Level 2: Significant other observable inputs other than Level 1 prices such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Level 3: Significant unobservable inputs that reflect assumptions that market participants would use in pricing an asset or liability.

The following is a summary of the estimated fair values, carrying amounts, and classification under the fair value hierarchy of our financial instruments (in thousands):


		March 31, 2025				December 31, 2024
	Fair Value Hierarchy Level	Fair Value		Carrying Amount		Fair Value		Carrying Amount
Cash and cash equivalents (a)	1/2	$	50,276	$	50,276	$	44,426	$	44,426
Deferred compensation	1	25,958		25,958		26,333		26,333
Short-term investments	2	—		—		6,956		6,956
Long-term investments	2	93		93		93		93
Cash flow hedge interest rate swaps	2	4,178		4,178		5,409		5,409
Short-term borrowings	2	23,226		23,226		27,117		27,117
Long-term debt	2	627,329		627,329		535,197		535,197

(a)As of March 31, 2025 cash and cash equivalents consist of cash of $43.4 million and cash equivalents of $6.9 million, which are classified as Level 1 and Level 2, respectively, under the fair value hierarchy. As of December 31, 2024 cash and cash equivalents consist of $44.4 million in cash, which is classified as Level 1 under the fair value hierarchy.

Cash equivalents consist of certificates of deposit with original maturities of three months, or less. These securities are accounted for as held-to-maturity and recorded at amortized cost, which approximates their fair values. The fair value of the underlying assets held by the deferred compensation plan are based on the quoted market prices of the underlying funds which are held by registered investment companies. The carrying value of our variable rate short-term borrowings and long-term debt under our credit facilities approximates fair value as the variable interest rates in the facilities reflect current market rates. The fair value of our cash flow interest rate swap agreements are obtained from independent third parties, are based upon market quotes, and represent the net amount required to terminate the interest rate swap, taking into consideration market rates and counterparty credit risk. Short-term and long-term investments consist of certificates of deposit with original maturities occurring within the next twelve months or in excess of twelve months, respectively. These certificates of deposit are securities accounted for as held-to-maturity and recorded at amortized cost, which approximates their fair values.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Note 15. Earnings Per Share

The following are reconciliations of the net earnings attributable to SMP and the shares used in calculating basic and diluted net earnings per common share attributable to SMP (in thousands, except shares and per share data):


	Three Months Ended March 31,
	2025		2024
Net earnings (loss) attributable to SMP
Continuing operations	$	13,705	$	9,863
Discontinued operations	(1,139)		(1,039)
Net earnings attributable to SMP	$	12,566	$	8,824

Basic net earnings (loss) per common share attributable to SMP
Continuing operations	$	0.63	$	0.45
Discontinued operations	$	(0.06)	$	(0.05)

Diluted net earnings (loss) per common share attributable to SMP
Continuing operations	$	0.61	$	0.44
Discontinued operations	$	(0.05)	$	(0.05)

Weighted average common shares outstanding, basic	21,886,810		21,923,830
Dilutive effect of restricted stock and performance-based stock	433,058		448,713
Weighted average common shares outstanding, diluted	22,319,868		22,372,543

The shares listed below were not included in the computation of diluted net earnings per common share attributable to SMP because to do so would have been anti-dilutive for the periods presented or because they were excluded under the treasury method (in thousands):


	Three Months Ended March 31,
	2025	2024
Restricted and performance-based shares	342	281

Note 16. Industry Segments

Our business is organized into four operating segments, Vehicle Control, Temperature Control, Engineered Solutions and Nissens Automotive, each of which focuses on a specific line of business. Our automotive aftermarket business is comprised of three operating segments, Vehicle Control, Temperature Control and Nissens Automotive, while our Engineered Solutions operating segment offers a broad array of conventional and future-oriented technologies. Nissens Automotive is a new operating segment created in the fourth quarter of 2024 comprising of our acquisition in November 2024.

There are no intersegment sales among our operating segments. Other consists of financial information related to the activities of our corporate headquarters function. The accounting policies of each segment are the same as those described in Note 1, "Summary of Significant Accounting Policies" in our Form 10-K for the year-ended December 31, 2024.

The following tables contain financial information for each reportable operating segment (in thousands):

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES


Three Months Ended March 31, 2025	Vehicle Control		Temperature Control		Engineered Solutions		Nissens Automotive		Other		Total
Net sales	$	192,342	$	88,883	$	65,972	$	66,182	$	—	$	413,379
Cost of sales	130,181		61,285		54,263		42,928		—		288,657
Gross profit	62,161		27,598		11,709		23,254		—		124,722

Selling and marketing expenses	12,335		4,197		1,930		2,763		—		21,225
Distribution expenses	15,447		8,113		1,496		9,347		487		34,890
General and administration expenses	9,667		4,325		5,087		8,130		6,369		33,578
Supply chain financing expenses	6,404		2,927		—		—		—		9,331
Restructuring and integration expenses	526		136		20		—		(9)		673
Other expenses	—		—		—		427		136		563
Total operating expenses	44,379		19,698		8,533		20,667		6,983		100,260

Operating income (loss)	$	17,782	$	7,900	$	3,176	$	2,587	$	(6,983)	$	24,462

Other non-operating income, net											2,248
Interest expense											7,761
Earnings from continuing operations before income taxes											$	18,949


Three Months Ended March 31, 2024	Vehicle Control		Temperature Control		Engineered Solutions		Nissens Automotive		Other		Total
Net sales	$	185,524	$	71,608	$	74,271	$	—	$	—	$	331,403
Cost of sales	126,625		51,919		63,337		—		—		241,881
Gross profit	58,899		19,689		10,934		—		—		89,522

Selling and marketing expenses	12,136		3,981		1,856		—		—		17,973
Distribution expenses	14,173		7,513		1,547		—		1,073		24,306
General and administration expenses	9,205		3,820		5,266		—		4,111		22,402
Supply chain financing expenses	7,744		2,286		—		—		—		10,030
Restructuring and integration expenses	101		58		33		—		—		192
Other expenses	—		—		—		—		—		—
Total operating expenses	43,359		17,658		8,702		—		5,184		74,903

Operating income (loss)	$	15,540	$	2,031	$	2,232	$	—	$	(5,184)	$	14,619

Other non-operating income, net											819
Interest expense											2,067
Earnings from continuing operations before income taxes											$	13,371

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES


	Three Months Ended March 31,
	2025		2024
Depreciation and amortization
Vehicle Control	$	3,670	$	3,524
Temperature Control	778		898
Engineered Solutions	2,500		2,469
Nissens Automotive	2,987		—
Other	332		410
Total depreciation and amortization	$	10,267	$	7,301
Capital expenditures
Vehicle Control	$	5,379	$	5,385
Temperature Control	1,301		458
Engineered Solutions	1,656		2,300
Nissens Automotive	136		—
Other	660		1,943
Total capital expenditures	$	9,132	$	10,086


	March 31, 2025		December 31, 2024
Investment in unconsolidated affiliates
Vehicle Control	$	2,550	$	2,447
Temperature Control	21,340		20,396
Engineered Solutions	2,123		1,999
Nissens Automotive	—		—
Other	—		—
Total investment in unconsolidated affiliates	$	26,013	$	24,842
Total assets
Vehicle Control	$	685,575	$	659,607
Temperature Control	321,550		276,216
Engineered Solutions	309,517		285,866
Nissens Automotive	497,865		482,773
Other	111,584		109,664
Total assets	$	1,926,091	$	1,814,126

For the disaggregation of our net sales from contracts with customers by major product group and geographic area within each of our operating segments, see Note 17, “Net Sales.”

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

Note 17. Net Sales

We disaggregate our net sales from contracts with customers by major product group and geographic area within each of our segments, as we believe it best depicts how the nature, amount, timing and uncertainty of our net sales are affected by economic factors.

Major Product Group

The Vehicle Control operating segment generates its revenues from core aftermarket sales of ignition, emissions, and fuel delivery, electrical and safety, and wire sets and other product categories primarily in the United States. The Temperature Control operating segment generates its revenue from aftermarket sales of air conditioning system components and other thermal products. The Engineered Solutions operating segment generates revenues from custom-engineered products to vehicle and equipment manufacturers in highly diversified global end-markets such as commercial and light vehicles, construction, agriculture, power sports and marine. The Nissens Automotive operating segment generates its revenues from aftermarket sales of engine cooling, air conditioning system components and engine efficiency products primarily in Europe.

The following table summarizes consolidated net sales by major product group within each operating segment (in thousands):


	Three Months Ended March 31,

	2025		2024
Vehicle Control
Engine Management (Ignition, Emissions and Fuel Delivery)	$	118,366	$	116,085
Electrical and Safety	58,319		52,407
Wire Sets and Other	15,657		17,032
Total Vehicle Control	192,342		185,524

Temperature Control
AC System Components	67,191		49,960
Other Thermal Components	21,692		21,648
Total Temperature Control	88,883		71,608

Engineered Solutions
Light Vehicle	21,404		21,803
Commercial Vehicle	18,605		22,908
Construction/Agriculture	9,408		10,076
All Other	16,555		19,484
Total Engineered Solutions	65,972		74,271

Nissens Automotive
Engine Cooling	27,773		—
Air Conditioning	27,166		—
Engine Efficiency	11,243		—
Total Nissens Automotive	66,182		—

Other	—		—

Total	$	413,379	$	331,403

Geographic Area

We sell our line of products primarily in the United States, with additional sales in Europe, Canada, Mexico, and other foreign countries. Sales are attributed to countries based upon the location of the customer. Our sales are substantially denominated in U.S. dollars.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

The following tables provide disaggregation of net sales information by geographic area within each operating segment (in thousands):


Three Months Ended March 31, 2025	Vehicle Control		Temperature Control		Engineered Solutions		Nissens Automotive		Other		Total
United States	$	172,333	$	84,458	$	37,299	$	3,507	$	—	$	297,597
Europe, excluding Poland	200		7		12,299		43,105		—		55,611
Canada	9,390		4,091		7,603		71		—		21,155
Poland	7		—		699		16,387		—		17,093
Mexico	9,064		2		2,226		24		—		11,316
Other foreign	1,348		325		5,846		3,088		—		10,607
Total	$	192,342	$	88,883	$	65,972	$	66,182	$	—	$	413,379


Three Months Ended March 31, 2024	Vehicle Control		Temperature Control		Engineered Solutions		Nissens Automotive		Other		Total
United States	$	164,821	$	64,665	$	40,454	$	—	$	—	$	269,940
Europe, excluding Poland	271		16		13,859		—		—		14,146
Canada	9,158		6,632		8,182		—		—		23,972
Poland	12		—		347		—		—		359
Mexico	10,020		5		2,207		—		—		12,232
Other foreign	1,242		290		9,222		—		—		10,754
Total	$	185,524	$	71,608	$	74,271	$	—	$	—	$	331,403

Note 18. Commitments and Contingencies

Asbestos

In 1986, we acquired a brake business, which we subsequently sold in March 1998 and which is accounted for as a discontinued operation in the accompanying statements of operations. When we originally acquired this brake business, we assumed future liabilities relating to any alleged exposure to asbestos-containing products manufactured by the seller of the acquired brake business. In accordance with the related purchase agreement, we agreed to assume the liabilities for all new claims filed on or after September 2001. Our ultimate exposure will depend upon the number of claims filed against us on or after September 2001, and the amounts paid for settlements, awards of asbestos-related damages, and defense of such claims. At March 31, 2025, approximately 1,195 cases were outstanding for which we may be responsible for any related liabilities. Since inception in September 2001 through March 31, 2025, the amounts paid for settled claims and awards of asbestos-related damages, including interest, were approximately $96 million. We do not have insurance coverage for the indemnity and defense costs associated with the claims we face.

In evaluating our potential asbestos-related liability, we have considered various factors including, among other things, an actuarial study of the asbestos related liabilities performed by an independent actuarial firm, our settlement amounts and whether there are any co-defendants, the jurisdiction in which lawsuits are filed, and the status and results of such claims. As is our accounting policy, we consider the advice of actuarial consultants with experience in assessing asbestos-related liabilities to estimate our potential claim liability; and perform an actuarial evaluation in the third quarter of each year and whenever events or changes in circumstances indicate that additional provisions may be necessary. The methodology used to project asbestos-related liabilities and costs in our actuarial study considered: (1) historical data available from publicly available studies; (2) an analysis of our recent claims history to estimate likely filing rates into the future; (3) an analysis of our pending claims; (4) an analysis of our settlements and awards of asbestos-related damages to date; and (5) an analysis of closed claims with pay ratios and lag patterns in order to develop average future settlement values. Based on the information contained in the actuarial study and all other available information considered by us, we have concluded that no amount within the range of settlement payments and awards of asbestos-related damages was more likely than any other and, therefore, in assessing our asbestos liability we compare the low end of the range to our recorded liability to determine if an adjustment is required.

In accordance with our policy to perform an annual actuarial evaluation in the third quarter of each year, an actuarial study was performed as of August 31, 2024. The results of the August 31, 2024 study included an estimate of our undiscounted liability for settlement payments and awards of asbestos-related damages, excluding legal costs, ranging from $99.6 million

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

to $210.8 million for the period through 2065. The change from the prior year study, which was as of August 31, 2023, was a $15.6 million increase for the low end of the range and a $75.5 million increase for the high end of the range. The increase in the estimated undiscounted liability from the prior year study at both the low end and high end of the range reflects our actual experience, our historical data and certain assumptions with respect to events that may occur in the future.

Based upon the results of the August 31, 2024 actuarial study, in September 2024 we increased our asbestos liability to $99.6 million, the low end of the range, and recorded an incremental pre-tax provision of $29.3 million in loss from discontinued operations in the accompanying consolidated statements of operations. Future legal costs, which are expensed as incurred and reported in loss from discontinued operations in the accompanying consolidated statements of operations, are estimated, according to the August 31, 2024 study, to range from $49.8 million to $115.9 million for the period through 2065. Total operating cash outflows related to discontinued operations, which include settlements, awards of asbestos-related damages and legal costs, net of taxes, were $4.4 million and $3 million for the three months ended March 31, 2025 and 2024, respectively.

We plan to perform an annual actuarial evaluation during the third quarter of each year for the foreseeable future and whenever events or changes in circumstances indicate that additional provisions may be necessary. Given the uncertainties associated with projecting such matters into the future and other factors outside our control, we can give no assurance that additional provisions will not be required. We will continue to monitor events and changes in circumstances surrounding these potential liabilities in determining whether to perform additional actuarial evaluations and whether additional provisions may be necessary. At the present time, however, we do not believe that any additional provisions would be reasonably likely to have a material adverse effect on our liquidity or consolidated financial position.

Other Litigation

We are currently involved in various other legal claims and legal proceedings (some of which may involve substantial amounts), including claims related to commercial disputes, product liability, employment, and environmental. Although these legal claims and legal proceedings are subject to inherent uncertainties, based on our understanding and evaluation of the relevant facts and circumstances, we believe that the ultimate outcome of these matters will not, either individually or in the aggregate, have a material adverse effect on our business, financial condition or results of operations. We may at any time determine that settling any of these matters is in our best interests, which settlement may include substantial payments. Although we cannot currently predict the specific amount of any liability that may ultimately arise with respect to any of these matters, we will record provisions when the liability is considered probable and reasonably estimable. Significant judgment is required in both the determination of probability and the determination as to whether an exposure can be reasonably estimated. As additional information becomes available, we reassess our potential liability related to these matters. Such revisions of the potential liabilities could have a material adverse effect on our business, financial condition or results of operations.

Warranties

We generally warrant our products against certain manufacturing and other defects. These product warranties are provided for specific periods of time of the product depending on the nature of the product. The accrued product warranty costs are based primarily on historical experience of actual warranty claims and included in accrued customer returns.

The following table provides the changes in our product warranties (in thousands):


	Three Months Ended March 31,
	2025		2024
Balance, beginning of period	$	24,715	$	21,134
Liabilities accrued for current year sales	32,625		28,677
Settlements of warranty claims	(25,989)		(26,719)
Balance, end of period	$	31,351	$	23,092

ITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

This Report contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. Forward-looking statements in this Report are indicated by words such as “anticipates,” “expects,” “believes,” “intends,” “plans,” “estimates,” “projects,” “strategies” and similar expressions. These statements represent our expectations based on current information and assumptions and are inherently subject to risks and uncertainties. Our actual results could differ materially from those which are anticipated or projected as a result of certain risks and uncertainties, including, but not limited to, changes or loss in business relationships with our major customers and in the timing, size and continuation of our customers’ programs; changes in our supply chain financing arrangements, such as changes in terms, termination of contracts and/or the impact of rising interest rates; increases in production or material costs, including procurement costs resulting from higher customs duties and tariffs; the ability of our customers to achieve their projected sales; competitive product and pricing pressures, and inflationary cost increases in raw materials, labor and transportation, that cannot be recouped in product pricing; the performance of the automotive aftermarket and/or other end-markets that we supply; changes in the product mix and distribution channel mix; economic and market conditions; successful integration of acquired businesses; our ability to achieve benefits from our cost savings initiatives; product liability matters (including, without limitation, those related to asbestos-related contingent liabilities); the effects of disruptions in the supply chain caused by geopolitical risks;uncertainties in U.S. trade policy, particularly as it relates to Mexico, Canada and China; as well as other risks and uncertainties, such as those described under Risk Factors, Quantitative and Qualitative Disclosures About Market Risk and those detailed herein and from time to time in the filings of the Company with the SEC. Forward-looking statements are made only as of the date hereof, and the Company undertakes no obligation to update or revise the forward-looking statements, whether as a result of new information, future events or otherwise. In addition, historical information should not be considered as an indicator of future performance. The following discussion should be read in conjunction with the unaudited consolidated financial statements, including the notes thereto, included elsewhere in this Report.

Overview

We are a leading manufacturer and distributor of premium replacement parts in the automotive aftermarket and a custom-engineered solutions provider to vehicle and equipment manufacturers in diverse non-aftermarket end markets. Our business is organized into four operating segments. Our automotive aftermarket business is comprised of three segments, Vehicle Control, Temperature Control and Nissens Automotive while our Engineered Solutions Segment offers a broad array of conventional and future-oriented technologies. We sell our products primarily to retailers, warehouse distributors, original equipment manufacturers and original equipment service part operations in the United States, Europe, Canada, Mexico, and other foreign countries.

Our Vehicle Control operating segment services our core automotive aftermarket customers, deriving its sales from three major product groups:– (1) Ignition, Emissions & Fuel Delivery, which includes the traditional internal combustion engine (ICE) dependent categories; (2) Electrical & Safety, which includes powertrain neutral vehicle technologies such as electrical switches/relays, safety related products such as anti-lock brake and vehicle speed sensors, tire pressure monitoring, park assist sensors, and advanced driver assistance components; and (3) Wire Sets & Other, which includes spark plug wire sets and other related products, and are product categories we have noted to be in secular decline based upon product life cycle.

Our Temperature Control operating segment services our core automotive aftermarket customers with thermal products, and is poised to benefit from the broader adoption of more complex air conditioning and other thermal systems. These systems will provide passenger comfort regardless of the vehicles’ powertrain, and are being developed to cool batteries and other products used on electric vehicles. Segment offerings include sales from thermal products in the aftermarket business under two major product groups:– (1) AC System Components, which includes compressors, connecting lines, heat exchangers, and expansion devices; and (2) Other Thermal Components, which includes parts that provide engine, transmission, electric drive motor, and battery temperature management.

Our Engineered Solutions operating segment supplies custom-engineered solutions to vehicle and equipment manufacturers in highly diversified global end-markets such as commercial and light vehicles, construction, agriculture, power sports and marine. Segment offerings include product categories that offer a broad array of conventional and future-oriented technologies, including those that are specific to vehicle electrification as well as those that are powertrain-neutral.

Our Nissens Automotive Segment was created in the fourth quarter of 2024 following the completion of our previously-disclosed acquisition of Nissens Automotive, a leading European supplier of thermal management and engine efficiency products for the automotive aftermarket. Segment offerings include premium replacement parts within the following major product groups:- (1) Engine Cooling, which includes radiators and oil coolers, electronics, such as electric water pumps and temperature sensors, and related components, such as expansion tanks and fan clutches; (2) Air Conditioning, which includes compressors and condensers, electronics, such as blowers, fans and pressure sensors, and related components, such as evaporators, expansion valves and heaters; and (3) Engine Efficiency, which includes turbochargers and intercoolers, electronics, such as exhaust gas recirculation (EGR) valves and modules, and related components, such as EGR coolers and oil feed pipes.

Overview of Financial Performance

The following discussion should be read in conjunction with our consolidated financial statements and the notes thereto. This discussion summarizes the significant factors affecting our results of operations and the financial condition of our business during the three months ended March 31, 2025 and 2024.


	Three Months Ended March 31,
(In thousands, except per share data)	2025			2024

Net sales	$	413,379		$	331,403
Gross profit	124,722			89,522
Gross profit %	30.2		%	27		%
Operating income	24,462			14,619
Operating income %	5.9		%	4.4		%
Earnings from continuing operations before income taxes	18,949			13,371
Provision for income taxes	5,069			3,342
Earnings from continuing operations	13,880			10,029
Loss from discontinued operations, net of income taxes	(1,139)			(1,039)
Net earnings	12,741			8,990
Net earnings attributable to noncontrolling interest	175			166
Net earnings attributable to SMP	12,566			8,824
Earnings per share data attributable to SMP – Diluted:
Continuing operations	$	0.61		$	0.44
Discontinued operations	(0.05)			(0.05)
Net earnings per common share	$	0.56		$	0.39

Consolidated net sales for the three months ended March 31, 2025 were $413.4 million, an increase of $82 million, or 24.7%, compared to net sales of $331.4 million in the same period in 2024. Net sales increased in all our operating segments, except for our Engineered Solutions operating segment, when compared to the comparable period in the prior year.

The increase in net sales in the three months ended March 31, 2025 when compared to the same period in the prior year reflects the impact of multiple factors including:

•inclusion of $66.2 million of net sales in our new segment, Nissens Automotive, created with the acquisition of Nissens Automotive in the fourth quarter of 2024,

•earlier timing and strong volume of pre-season customer orders in our Temperature Control operating segment. Overall, full year results at Temperature Control will be dependent upon summer weather conditions and customer inventory levels, and

•stable demand in the automotive aftermarket business across our major product groups in our Vehicle Control operating segment, offset by

•decreased net sales in our Engineered Solutions operating segment as growth from business wins and successful cross-selling efforts was more than offset by general softness in end markets.

Gross margins, as a percentage of net sales, increased to 30.2% in the first quarter of 2025 compared to 27% in the first quarter of 2024. Overall, the gross margin increase as a percentage of sales in the first quarter of 2025 primarily reflects the positive impact of higher sales volumes leading to higher fixed manufacturing cost absorption, improved operating performance including the impact of cost control measures, as well as, some benefit from movements in foreign currency exchange rates, which more than offset slowing market demand in our Engineered Solutions operating segment. Gross margin percentage in our newly acquired operating segment, Nissens Automotive, was consistent with our expectations and contributed to the higher overall consolidated gross margin percentage. Looking ahead we expect additional tariffs on imports into the United States to begin to impact our business in the second quarter of 2025, which we expect to partially mitigate with a combination of price increases and cost reduction efforts.

Operating margin as a percentage of net sales for the three months ended March 31, 2025 increased to 5.9% as compared to 4.4% for the same period in 2024. Included in our operating margin were selling, general and administrative expenses of $99.8 million, or 24.2% of net sales for the three months ended March 31, 2025 compared to $74.7 million, or 22.6% of net sales, for the same period in 2024. The $25.1 million increase in selling, general and administrative expenses in the first quarter of 2025 as compared to the first quarter of 2024 is principally due to (i) $20.7 million of selling, general and administrative expenses in our newly acquired operating segment, Nissens Automotive, and (ii) higher general and administrative expenses in the remainder of our business.

Overall, our core automotive aftermarket business remains strong, and we are both excited and optimistic for the growth potential in our newly acquired operating segment, Nissens Automotive, and the long-term growth potential of the complementary markets served in our Engineered Solutions operating segment.

Restructuring Programs

During the first quarter of 2025, we recorded expenses related to our separation program and cost reduction initiative of $0.4 million and $0.3 million, respectively. In addition we expanded our cost reduction initiative to encompass the relocation of additional product lines from certain plants in the United States and Canada to our existing manufacturing facilities in Mexico. Additional expenses related to these programs are expected to be immaterial.

Expenses incurred pursuant to the program are recorded in restructuring and integration expenses in our statements of operations. We continue to realize the benefits of these programs through reduced operating costs in 2025 and continue to look for opportunities to reduce our operating cost structure to remain competitive while continuing to grow our business.

United States Trade Policy

Since February 2025, the United States government imposed new tariffs on imports to the United States from certain countries and regions, including Canada, Mexico, China, the European Union and many other countries. Certain foreign governments have implemented retaliatory actions in response to the change in United States trade policy. We operate manufacturing plants in, and rely on imports from Canada, Mexico, China and the European Union to serve our customers in the United States, and therefore, we are exposed to the adverse impacts of higher tariffs on imported raw materials, components and finished goods. In response, we have taken, and will continue to take actions to optimize our operations to minimize the impact of such tariffs and maintain our profitability through cost and pricing measures. We believe our diverse global footprint provides a competitive advantage and resiliency within our supply chain. More than one-half of our sales in the United States are from products manufactured in North America, which are currently mostly exempt from tariffs under the United States-Mexico-Canada Agreement. Products sourced from China represent approximately one-quarter of our sales in the United States, with the remainder of our sales in the United States from products sourced from other regions of the world which are currently subject to lower tariffs. Furthermore, our recent acquisition of Nissens Automotive provides sales diversification outside of the United States. The extent and duration of tariffs and the resulting impact on macroeconomic conditions and on our business are uncertain and may depend on various factors, including negotiations between the United States and affected countries, retaliation imposed by other countries, tariff exemptions, and decisions to pause, reimpose or increase tariffs. We will continue to actively monitor international trade developments and evaluate the potential impact on our results of operations and financial condition.

Sustainability

Our Company was founded in 1919 on the values of integrity, common decency and respect for others. These values are embodied in our Code of Ethics, which has been adopted by the Board of Directors of the Company to serve as a statement of principles to guide our decision-making and reinforce our commitment to these values in all aspects of our business. These values also serve as the foundation for our continued focus on many important sustainability issues.

We have made significant strides with respect to our sustainability initiatives, building awareness of the environmental impact of our operations, and challenging ourselves to reduce our impact by reducing our usage of energy and water, reducing our generation of waste, increasing our recycling efforts and reducing our Scope 1 and Scope 2 greenhouse gas emissions. Additionally, we believe our product offering contributes to a greener car parc through several key product categories that are critical components in automotive systems designed to improve fuel economy and reduce harmful emissions, such as fuel injectors, exhaust gas recirculation valves, sensors and tubes, and evaporative emission control system components. We also bring to market alternative energy products, which utilize cleaner burning fuels or are designed for electric or hybrid electric vehicles, and we remanufacture key categories within our product portfolio, such as air conditioning compressors, diesel injectors and diesel pumps, through processes that save energy and reduce waste.

With each year, we seek to enhance our commitment to sustainability initiatives, improve our employee engagement, and find ways to give back to our communities. Information on our sustainability initiatives can be found in our most current sustainability report and on our corporate website at ir.smpcorp.com under “Sustainability” and at smpcares.smpcorp.com. Information in our sustainability report and on our corporate websites regarding our sustainability initiatives are referenced for general information only and are not incorporated by reference in this Report.

Interim Results of Operations

Comparison of the Three Months Ended March 31, 2025 to the Three Months Ended March 31, 2024

Sales. Consolidated net sales for the three months ended March 31, 2025 were $413.4 million, an increase of $82.0 million, or 24.7%, compared to $331.4 million in the same period of 2024, with the majority of our net sales to customers located in the United States. Net sales increased in all our operating segments, except for our Engineered Solutions operating segment, when compared to the comparable period in the prior year.

The following table summarizes consolidated net sales by segment and by major product group within each segment for the three months ended March 31, 2025 and 2024 (in thousands):


	Three Months Ended March 31,

	2025		2024
Vehicle Control
Engine Management (Ignition, Emissions and Fuel Delivery)	$	118,366	$	116,085
Electrical and Safety	58,319		52,407
Wire Sets and Other	15,657		17,032
Total Vehicle Control	192,342		185,524

Temperature Control
AC System Components	67,191		49,960
Other Thermal Components	21,692		21,648
Total Temperature Control	88,883		71,608

Engineered Solutions
Light Vehicle	21,404		21,803
Commercial Vehicle	18,605		22,908
Construction/Agriculture	9,408		10,076
All Other	16,555		19,484
Total Engineered Solutions	65,972		74,271

Nissens Automotive
Engine Cooling	27,773		—
Air Conditioning	27,166		—
Engine Efficiency	11,243		—
Total Nissens Automotive	66,182		—

Other	—		—

Total	$	413,379	$	331,403

Vehicle Control’s net sales for the three months ended March 31, 2025 increased $6.8 million, or 3.7%, to $192.3 million compared to $185.5 million in the same period of 2024. Demand in the Vehicle Control aftermarket segment remains stable across our major product groups.

Temperature Control’s net sales for the three months ended March 31, 2025 increased $17.3 million, or 24.1%, to $88.9 million compared to $71.6 million in the same period of 2024. Temperature Control’s net sales for the first quarter of 2025 reflect the earlier timing of and strong pre-season customer orders compared to the same period in 2024. Overall, full year results at Temperature Control will be dependent upon ongoing weather conditions and customer inventory levels.

Engineered Solutions’ net sales for the three months ended March 31, 2025 decreased $8.3 million, or 11.2%, to $66 million compared to $74.3 million in the same period of 2024. Overall, net sales in our Engineered Solutions operating segment declined year-over-year as growth from business wins and successful cross-selling efforts was more than offset by slowing demand from existing customers.

Nissens Automotive's net sales of $66.2 million for the three months ended March 31, 2025 are consistent with our expectations. We expect Nissens Automotive's net sales to follow a similar annual seasonal pattern as the Temperature Control segment, as demand for many of Nissens Automotive's products increase with warmer weather. We also expect to benefit from revenue synergies resulting from the acquisition starting in 2026 and beyond.

Gross Margins. Gross margins, as a percentage of consolidated net sales, increased to 30.2% in the first quarter of 2025, compared to 27.0% in the first quarter of 2024. The following table summarizes gross margins by segment for the three months ended March 31, 2025 and 2024, respectively (in thousands):


Three Months Ended March 31,	Vehicle Control			Temperature Control			Engineered Solutions			Nissens Automotive			Other		Total
2025
Net sales	$	192,342		$	88,883		$	65,972		$	66,182		$	—	$	413,379
Gross margins	62,161			27,598			11,709			23,254			—		124,722
Gross margin percentage	32.3		%	31.1		%	17.7		%	35.1		%	—		30.2		%

2024
Net sales	$	185,524		$	71,608		$	74,271		$	—		$	—	$	331,403
Gross margins	58,899			19,689			10,934			—			—		89,522
Gross margin percentage	31.7		%	27.5		%	14.7		%	—			—		27		%

Compared to the first quarter of 2024, gross margin percentage increased at our Vehicle Control, Temperature Control and Engineered Solutions operating segments by 0.6 percentage points from 31.7% to 32.3%, 3.6 percentage points from 27.5% to 31.1%, and 3 percentage points from 14.7% to 17.7%, respectively. Gross margin percentage at our Nissens Automotive operating segment was 35.1%.

Our Vehicle Control and Temperature Control operating segments primarily benefited from favorable manufacturing cost absorption due to higher production levels, as well as the impact of cost saving measures, and favorable customer sales mix.

Despite lower net sales, the gross margin percentage in our Engineered Solutions operating segment increased in the first quarter of 2025 when compared to the comparable period in 2024 primarily due to favorable customer sales mix and foreign exchange movements. While we anticipate continued margin pressure resulting from tariffs, market competition and lingering inflation, we believe that our cost savings initiatives and pricing actions should help to offset much of this impact to our gross margins.

The gross margin percentage at our Nissens Automotive operating segment was negatively impacted by $4.6 million of amortization for inventory fair value adjustments related to the application of accounting for business combinations. Amortization of the remaining inventory fair value adjustment will continue through the second quarter of 2025.

Selling, General and Administrative Expenses. Selling, general and administrative expenses were $99.8 million, or 24.2% of consolidated net sales, in the first quarter of 2025, as compared to $74.7 million, or 22.6% of consolidated net sales, in the first quarter of 2024. The $25.1 million increase in selling, general and administrative expenses in the first quarter of 2025 as compared to the first quarter of 2024 is principally due to (i) $20.7 million of selling, general and administrative expenses in our newly acquired operating segment, Nissens Automotive, and (ii) higher general and administrative expenses in the remainder of our business.

Restructuring and Integration Expenses. Restructuring and integration expenses, primarily consisting of severance and other benefit enhancements, were $0.7 million for the three months ended March 31, 2025 compared to $0.2 million in the same period of 2024. Restructuring and integration expenses incurred in the first quarter of 2025 relate primarily to the Separation Program initiated in the second quarter of 2024. We anticipate that the program will be substantially complete by the end of 2027.

Restructuring and integration expenses of $0.2 million in the first quarter of 2024 relate to the Cost Reduction Initiative initiated in the fourth quarter of 2022. We anticipate that the Cost Reduction Initiative will be substantially complete by the end of 2026.

Operating Income. Operating income was $24.5 million, or 5.9% of consolidated net sales, in the first quarter of 2025, compared to $14.6 million, or 4.4% of consolidated net sales, in the first quarter of 2024. The year-over-year increase in operating income of $9.8 million is primarily the result of higher net sales and gross margin percentage, partly offset by higher selling, general and administrative expenses.

Other Non-Operating Income, Net. Other non-operating income, net was $2.2 million in the first quarter of 2025, compared to $0.8 million in the first quarter of 2024. The year-over-year increase in other non-operating income, net primarily results

from the favorable impact of changes in foreign currency exchange rates in addition to higher equity income from our joint ventures.

Interest Expense. Interest expense was $7.8 million in the first quarter of 2025, compared to $2.1 million in the first quarter of 2024. The year-over-year increase in interest expense primarily reflects the impact of higher average outstanding borrowings in the first quarter of 2025 when compared to the first quarter of 2024 due to borrowings to fund our acquisition of Nissens Automotive in the fourth quarter of 2024.

Income Tax Provision. The income tax provision in the first quarter of 2025 was $5.1 million at an effective tax rate of 26.8% compared to $3.3 million at an effective tax rate of 25% for the same period in 2024. The increase in the effective tax rate is due to higher earnings and taxes in foreign jurisdictions, primarily related to the inclusion of our new operating segment, Nissens Automotive.

Loss from Discontinued Operations. Loss from discontinued operations, net of income taxes, during the first quarter of 2025 and 2024 of $1.1 million and $1.0 million, respectively, reflects legal and other administrative expenses associated with our asbestos-related liability. As discussed more fully in Note 18, “Commitments and Contingencies” in the notes to our consolidated financial statements (unaudited), we are responsible for certain future liabilities relating to alleged exposure to asbestos containing products.

Net Earnings Attributable to Noncontrolling Interest. Net earnings attributable to noncontrolling interest relates to the minority shareholders’ interest in Trombetta Asia, Ltd., our 70% owned joint venture in Hong Kong, with operations in China and, in Foshan GWO YNG SMP Vehicle Climate Control & Cooling Products Co. Ltd., our 80% owned joint venture in China. Net earnings attributable to noncontrolling interest were $0.2 million during each of the three months ended March 31, 2025 and 2024, respectively.

Restructuring and Integration Programs

For a detailed discussion on the restructuring and integration costs, see Note 4, “Restructuring and Integration Expenses,” of the notes to our consolidated financial statements (unaudited).

Liquidity and Capital Resources

Our primary cash requirements include working capital, capital expenditures, quarterly dividend payments, stock repurchases, principal and interest payments on indebtedness and acquisitions. The following table summarizes our primary sources of funds including ongoing net cash flows from operating activities and borrowing availability under our credit agreement ("2024 Credit Agreement") (in thousands):


	March 31,				December 31,
	2025		2024		2024

Operating cash flows	$	(60,220)	$	(45,716)	$	76,693
Total debt	$	650,555	$	214,902	$	562,314
Cash and cash equivalents	50,276		27,113		44,426
Net debt	$	600,279	$	187,789	$	517,888
Remaining borrowing capacity	$	108,463	$	274,230	$	193,379
Total liquidity	158,739		301,343		237,805

Operating Activities. During the first quarter of 2025, cash used in operating activities was $60.2 million compared to $45.7 million in the same period of 2024.

Net earnings during the first quarter of 2025 were $12.7 million compared to $9 million in the same period of 2024. The decrease in cash provided by operating activities resulted primarily from the higher year-over-year increase in accounts receivable of $68.9 million compared to $44 million in the same period of 2024 due to higher net sales, partially offset by an increase in accounts payable of $1 million as compared to a decrease of $9.3 million in the same period of 2024, also due to higher net sales.

During the year ended December 31, 2024, we generated operating cash flow by actively managing our payables and accounts receivable despite increased inventories due to higher sales. We continue to actively manage our working capital to maximize our operating cash flow.

Investing Activities. Cash used in investing activities was $6.2 million during the first quarter of 2025, as compared to $10.1 million in the same period of 2024. Investing activities during the three months ended March 31, 2025 and 2024 primarily consisted of capital expenditures of $9.1 million and $10.1 million, respectively. Capital expenditures remain elevated due to continued investment in the start-up of our new distribution facility in Shawnee, Kansas.

Financing Activities. Cash provided by financing activities was $72.5 million during the first quarter of 2025, as compared to $50.4 million in the same period of 2024. During the first quarter of 2025, we (i) increased our borrowings under our 2024 Credit Agreement by $77.1 million, and (ii) paid dividends to SMP shareholders of $6.8 million. Cash provided by borrowings under our 2024 Credit Agreement in the three months ended March 31, 2025 was primarily used to fund our operating activities and capital expenditures, and pay dividends.

During the first quarter of 2024, we (i) increased our borrowings under our 2022 Credit Agreement by $58.7 million; and (ii) paid dividends to SMP shareholders of $6.4 million. Cash provided by borrowings under our 2022 Credit Agreement in the three months ended March 31, 2024 was primarily used to fund our operating activities and capital expenditures, and pay dividends.

In February 2025, we raised our quarterly dividend to SMP shareholders from $0.29 to $0.31 per share of common stock. We anticipate that we will continue to pay quarterly cash dividends in the future. However, the payment and amount of future dividends remain within the discretion of the Board and will depend upon our future earnings, financial condition, capital requirements, legal requirements, and other factors.

Liquidity.

Our primary sources of funds are ongoing net cash flows from operating activities and availability under our available financing arrangements, primarily our 2024 Credit Agreement, as described below and further in Note 9, “Credit Facilities and Long-Term Debt,” of the notes to our consolidated financial statements (unaudited) and Note 11 of the Notes to our Consolidated Financial Statements in our Annual Report on Form 10-K for the year ended December 31, 2024.

Our 2024 Credit Agreement matures in September 2029 and provides for an approximately $750 million credit facility, comprised of (i) a $430 million multi-currency revolving credit facility ("global tranche"); (ii) a $10 million multi-currency revolving credit facility, available to one or more wholly-owned Danish subsidiaries of the Company ("Danish tranche"); (iii) a $200 million delayed draw term loan facility in U.S. dollars; and (iv) a 100 million euros delayed draw term loan facility. The revolving credit facility has a $25 million sublimit for the issuance of letters of credit, and a $30 million sublimit for the borrowing of swingline loans.

The term loans amortize in quarterly installments of 1.25% in each of the first two years following the funding in 2024, 1.875% for the next year, and 2.50% in each quarter thereafter. The Company may request up to two one-year extensions of the maturity date.

The Company may, subject to customary conditions, increase the global tranche or obtain incremental term loans in an aggregate amount not to exceed (x) the greater of (i) $168 million and (ii) 100% of consolidated EBITDA for the four fiscal quarters ended most recently before such date, plus (y) any voluntary prepayment of term loans, plus (z) any amount that, after giving effect to the increase, the pro forma First Lien Net Leverage Ratio (as defined in the 2024 Credit Agreement) does not exceed 2.75 to 1.00. The Company may also, subject to customary conditions, request to increase the Danish tranche by up to $5 million.

Borrowings bear interest at the applicable interest rate index selected by the Company based on the particular currency borrowed plus a credit spread adjustment depending on the index, and a margin ranging from 1.25% to 2.25% per annum based on the total net leverage ratio of the Company and its restricted subsidiaries. The Company may select interest periods of one, three or six months depending on the index. Interest is payable at the end of the selected interest period, but no less frequently than quarterly.

The Company may prepay the borrowings, in whole or in part, at any time without premium or penalty, subject to certain conditions.

The weighted average interest rate under the 2024 Credit Agreement, adjusted for the impact of interest rate swap agreements, was 5.4% and 5.6% at March 31, 2025 and December 31, 2024, respectively, primarily consisting of Term SOFR for borrowings in U.S. dollars and EURIBOR for borrowings in euros.

customary exceptions, thresholds and baskets. The Company is in compliance with its debt covenants. The 2024 Credit Agreement also contains customary events of default.

In order to reduce our accounts receivable balances and improve our cash flow, we are party to several supply chain financing arrangements, in which we may sell certain of our customers’ trade accounts receivable to such customers’ financial institutions. We sell our undivided interests in certain of these receivables at our discretion when we determine that the cost of these arrangements is less than the cost of servicing our receivables with existing debt. Under the terms of the agreements, we retain no rights or interest, have no obligations with respect to the sold receivables, and do not service the receivables after the sale. As such, these transactions are accounted for as a sale.

In 2022, our Board of Directors authorized the purchase of up to $30 million of our common stock under a stock repurchase program. Stock will be purchased from time to time in the open market, or through private transactions, as market conditions warrant. Under this program, there were no repurchases of common stock during the three months ended March 31, 2025. In the three months ended March 31, 2024, we repurchased 79,922 shares of our common stock at a total cost of $2.6 million. As of March 31, 2025, there was approximately $19.6 million available for future stock purchases under the program.

Material Cash Commitments

Material cash commitments as of March 31, 2025 consist of required cash payments to service our outstanding borrowings of $631 million under our 2024 Credit Agreement, the future minimum cash requirements of $147.4 million through 2034 under operating leases, and expected future cash payments relating to our restructuring activities of $4.2 million with approximately $3.7 million paid in the remainder of 2025, approximately $0.4 million in 2026 and approximately $0.1 million thereafter. All of our other known cash commitments as of March 31, 2025 are not material. For additional information related to our material cash commitments, see Note 4, “Restructuring and Integration Expenses”, Note 8, “Leases,” and Note 9, “Credit Facilities and Long-Term Debt,” in the notes to our consolidated financial statements (unaudited).

We anticipate that our cash flow from operations, available cash, and available borrowings under our 2024 Credit Agreement will be adequate to meet our future liquidity needs for at least the next twelve months. Significant assumptions underlie this belief, including, among other things, that we will be able to mitigate the future impact, if any, of disruptions in the supply chain caused by geo-political risks, future increases in interest rates, and significant inflationary cost increases in raw materials, labor and transportation that we are unable to pass through our customers, macroeconomic uncertainty, and that there will be no material adverse developments in our business, liquidity or capital requirements. If material adverse developments were to occur in any of these areas, there can be no assurance that our business will generate sufficient cash flow from operations, or that future borrowings will be available to us under our 2024 Credit Agreement in amounts sufficient to enable us to pay the principal and interest on our indebtedness, or to fund our other liquidity needs.

In addition, if we default on any of our indebtedness, or breach any financial covenant in our 2024 Credit Agreement, our business could be adversely affected.

For further information regarding the risks in our business, refer to Item 1A “Risk Factors” of our Annual Report on Form 10-K for the year ended December 31, 2024.

Critical Accounting Policies and Estimates

We have identified the accounting policies and estimates surrounding the “Valuation of Long-Lived and Intangible Assets and Goodwill,” and “Asbestos Litigation” as critical to our business operations and the understanding of our results of operations. The impact and any associated risks related to these policies and estimates on our business operations is discussed throughout “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” where such policies and estimates affect our reported and expected financial results. There have been no material changes to these and other accounting policies and estimates from the information provided in Note 1 of the Notes to our Consolidated Financial Statements in our Annual Report on Form 10-K for the year ended December 31, 2024.

You should be aware that preparation of our consolidated financial statements requires us to make estimates and assumptions that affect the reported amount of assets and liabilities, the disclosure of contingent assets and liabilities at the date of our consolidated financial statements, and the reported amounts of revenue and expenses during the reporting periods. We can give no assurances that actual results will not differ from those estimates. Although we do not believe that there is a reasonable likelihood that there will be a material change in the future estimates, or in the assumptions that we use in calculating the estimates, the uncertain future effects, if any, of the disruptions in the supply chain caused by geo-political risks, future increases in interest rates, inflation, macroeconomic uncertainty, and other unforeseen changes in the industry, or business, could materially impact the estimates, and may have a material adverse effect on our business, financial condition and results of operations.

Recently Issued Accounting Pronouncements

For a detailed discussion on recently issued accounting pronouncements and their impact on our consolidated financial statements, see Note 2, “Summary of Significant Accounting Policies” of the notes to our consolidated financial statements (unaudited).

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are exposed to market risk, primarily related to foreign currency exchange and interest rates. These exposures are actively monitored by management. Our exposure to foreign exchange rate risk is due to certain costs, revenues and borrowings being denominated in currencies other than one of our subsidiary’s functional currency, and net investments in our foreign subsidiaries. Similarly, we are exposed to market risk as the result of changes in interest rates, which may affect the cost of our financing. It is our policy and practice to use derivative financial instruments only to the extent necessary to manage exposures. We do not hold or issue derivative financial instruments for trading or speculative purposes.

Foreign Exchange Rate Risk

We have foreign exchange rate exposure primarily with respect to the Canadian dollar, the euro, the British pound, the Polish zloty, the Hungarian forint, the Mexican peso, the Danish Kroner, the Taiwan dollar, the Chinese yuan renminbi and the Hong Kong dollar. As of March 31, 2025 and December 31, 2024, our monetary assets and liabilities which are subject to this exposure, after consideration of the use of monetary liabilities in a net investment hedge of our investment in Nissens Automotive's foreign operations, are immaterial, therefore, the potential immediate loss to us that would result from a hypothetical 10% change in foreign currency exchange rates would not be expected to have a material impact on our earnings or cash flows. This sensitivity analysis assumes an unfavorable 10% fluctuation in the exchange rates affecting the foreign currencies in which monetary assets and liabilities are denominated and does not take into account the incremental effect of such a change on our foreign currency denominated revenues.

Interest Rate Risk

We manage our exposure to interest rate risk through the proportion of fixed rate debt and variable rate debt in our debt portfolio. To reduce our market risk to changes in interest rates on our variable rate borrowings, and to manage a portion of our exposure to changes in interest rates, we occasionally enter into interest rate swap agreements to synthetically convert all or a portion of our variable rate debt to a fixed rate. As of March 31, 2025, we had interest rate swap agreements with a total notional amount of $208.2 million.

As of March 31, 2025, we had approximately $631 million of outstanding borrowings under our 2024 Credit Agreement, net of deferred financing costs, of which approximately $422.8 million bears interest at variable rates of interest and $208.2 million bears interest at fixed rates, after consideration of the interest rate swap agreements. Additionally, we invest our excess cash in highly liquid short-term investments. Based upon our current level of borrowings under our 2024 Credit Agreement and our excess cash, the effect of a hypothetical, instantaneous and unfavorable change of 100 basis points in the interest rate may have an approximate $3.7 million annualized negative impact on our earnings before income taxes or cash flows.

In addition, we are party to several supply chain financing arrangements, in which we may sell certain of our customers’ trade accounts receivable to such customers’ financial institutions. We sell our undivided interests in certain of these receivables at our discretion when we determine that the cost of these arrangements is less than the cost of servicing our receivables with existing debt. During the three months ended March 31, 2025 we sold $184.6 million of receivables. Depending upon the level of sales of receivables, the effect of a hypothetical, instantaneous and unfavorable change of 100 basis points in the margin rate may have an approximate $1.8 million negative impact on our earnings before income taxes or cash flows. The charge related to the sale of receivables is included in selling, general and administrative expenses in our consolidated statements of operations.

Other than the aforementioned, there have been no significant changes to the information presented in Item 7A (Market Risk) of our Annual Report on Form 10-K for the year ended December 31, 2024.

ITEM 4. CONTROLS AND PROCEDURES

(a)Evaluation of Disclosure Controls and Procedures.

We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.

Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of our disclosure controls and procedures, as such term is defined under Rule 13a-15(e) and Rule 15d-15(e) promulgated under the Exchange Act, as of the end of the period covered by this Report. Based upon that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures were effective as of the end of the period covered by this Report.

(b)Changes in Internal Control Over Financial Reporting.

During the quarter ended March 31, 2025, we have not made any changes in the Company’s internal control over financial reporting that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting. We review, document and test our internal control over financial reporting using the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in the 2013 Internal Control – Integrated Framework. We may from time to time make changes aimed at enhancing their effectiveness and to ensure that our systems evolve with our business. These efforts may lead to various changes in our internal control over financial reporting.

PART II – OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS

The information required by this Item is incorporated herein by reference to the information set forth in Item 1, “Consolidated Financial Statements” of this Report under the caption “Asbestos” appearing in Note 18, “Commitments and Contingencies,” of the notes to our consolidated financial statements (unaudited).

ITEM 6. EXHIBITS


Exhibit Number
31.1			Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

31.2			Certification of Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

32.1			Certification of Chief Executive Officer furnished pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

32.2			Certification of Chief Financial Officer furnished pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

*			Certain schedules have been omitted pursuant to Item 601(b)(2) of Regulation S-K. The Company hereby undertakes to furnish supplemental copies of any of the omitted schedules upon request by the Securities and Exchange Commission.

101.INS**			Inline XBRL Instance Document (the instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document).
101.SCH**			Inline XBRL Taxonomy Extension Schema Document.
101.CAL**			Inline XBRL Taxonomy Extension Calculation Linkbase Document.
101.LAB**			Inline XBRL Taxonomy Extension Label Linkbase Document.
101.PRE**			Inline XBRL Taxonomy Extension Presentation Linkbase Document.
101.DEF**			Inline XBRL Taxonomy Extension Definition Linkbase Document.
104			Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101).

**In accordance with Regulation S-T, the XBRL-related information in Exhibit 101 to the Original Filing shall be deemed to be “furnished” and not “filed.”

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.


						STANDARD MOTOR PRODUCTS, INC.
						(Registrant)


Date: April 30, 2025						/s/ Nathan R. Iles
						Nathan R. Iles
						Chief Financial Officer
						(Principal Financial and Accounting Officer)

Standard Motor Products - 10-Q quarterly report FY2025 Q1

What is the market capitalization of a company?

DISCLAIMER

Contact

Links