Plexus
PLXS
#2879
Rank
A$8.06 B
Marketcap
A$301.11
Share price
0.06%
Change (1 day)
59.81%
Change (1 year)

Plexus - 10-Q quarterly report FY


Text size:
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549

FORM 10-Q


(X) Quarterly Report Under Section 13 or 15 (d) of the Securities Exchange
Act of 1934

For the Quarter ended December 31, 2001

or

( ) Transition Report Pursuant to Section 13 or 15(d) of the Securities
Exchange Act of 1934


Commission File Number 000-14824


PLEXUS CORP.
(Exact name of registrant as specified in charter)


Wisconsin 39-1344447
(State of Incorporation) (IRS Employer Identification No.)



55 Jewelers Park Drive
Neenah, Wisconsin 54957-0156
(Address of principal executive offices)(Zip Code)
Telephone Number (920) 722-3451
(Registrant's telephone number, including Area Code)

Indicate by check mark whether the registrant (1) has filed all reports
required to be filed by Section 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months (or for such reports), and (2) has been
subject to such filing requirements for the past 90 days.

Yes X No
--- ---

As of February 7, 2002 there were 41,870,985 of Common Stock of the
Company outstanding.
PLEXUS CORP.
TABLE OF CONTENTS
December 31, 2001
<TABLE>
<S> <C>
PART I. FINANCIAL INFORMATION....................................................................................3

Item 1. Consolidated Financial Statements...............................................................3

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME AND (LOSS).............3

CONDENSED CONSOLIDATED BALANCE SHEETS...........................................................4

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS.................................................5

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS............................................6

Item 2. Management's Discussion and Analysis of Financial Condition and Results of Operations...........9

SAFE HARBOR.....................................................................................9

OVERVIEW.......................................................................................10

MERGERS AND ACQUISITIONS.......................................................................10

RESULTS OF OPERATIONS..........................................................................10

LIQUIDITY AND CAPITAL RESOURCES................................................................12

DISCLOSURE ABOUT CRITICAL ACCOUNTING POLICIES..................................................13

ADDITIONAL DISCLOSURES CONCERNING LIQUIDITY AND CAPITAL RESOURCES, INCLUDING "OFF-BALANCE
SHEET" ARRANGEMENTS............................................................................14

NEW ACCOUNTING PRONOUNCEMENTS..................................................................16

RISK FACTORS...................................................................................17

Item 3. Quantitative and Qualitative Disclosures about Market Risk.....................................23



PART II - OTHER INFORMATION......................................................................................24

Item 6. Exhibits and Reports on Form 8-K...............................................................24



SIGNATURE........................................................................................................24
</TABLE>





2
PART I. FINANCIAL INFORMATION

ITEM 1. CONSOLIDATED FINANCIAL STATEMENTS

PLEXUS CORP.
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
AND COMPREHENSIVE INCOME AND (LOSS)
(in thousands, except per share data)
Unaudited
<TABLE>
<CAPTION>
Three Months Ended
December 31,
------------------------------------------------
2001 2000
-------------------- ------------------
<S> <C> <C>
Net sales $ 200,218 $ 272,097
Cost of sales 184,747 233,745
--------- ---------

Gross profit 15,471 38,352

Operating expenses:
Selling and administrative expenses 13,970 12,767
Amortization of goodwill 1,296 888
Restructuring costs 2,800 -
Acquisition and merger costs - 1,014
--------- ---------
18,066 14,669
--------- ---------

Operating income (loss) (2,595) 23,683

Other income (expense):
Interest expense (1,352) (1,827)
Miscellaneous 630 799
--------- ---------

Income (loss) before income taxes (3,317) 22,655

Income taxes (1,294) 9,442
--------- ---------

Net income (loss) $ (2,023) $ 13,213
========= =========

Earnings per share:
Basic $ (0.05) $ 0.33
========= =========
Diluted $ (0.05) $ 0.31
========= =========

Weighted average shares outstanding:
Basic 41,782 40,290
========= =========
Diluted 41,782 42,902
========= =========

Comprehensive income and (loss):
Net income (loss) $ (2,023) $ 13,213
Foreign currency hedges and translation adjustments (354) 307
--------- ---------
Comprehensive income (loss) $ (2,377) $ 13,520
========= =========
</TABLE>



See notes to condensed consolidated financial statements.




3
PLEXUS CORP.
CONDENSED CONSOLIDATED BALANCE SHEETS
(in thousands, except per share data)
Unaudited
<TABLE>
<CAPTION>
December 31, September 30,
2001 2001
------------- -------------
<S> <C> <C>
ASSETS
Current assets:
Cash and cash equivalents $ 133,160 $ 84,591
Short-term investments 475 20,775
Accounts receivable, net of allowance of $7,109 87,692 114,055
and $6,500, respectively
Inventories 114,360 135,409
Deferred income taxes 15,644 13,662
Prepaid expenses and other 20,439 10,317
--------- ---------

Total current assets 371,770 378,809

Property, plant and equipment, net 145,263 145,928
Goodwill, net 69,104 70,514
Deferred income taxes 3,708 3,624
Other 3,792 3,650
--------- ---------

Total assets $ 593,637 $ 602,525
========= =========


LIABILITIES AND SHAREHOLDERS' EQUITY
Current liabilities:
Current portion of long-term debt and capital lease obligations $ 8,982 $ 8,175
Accounts payable 47,841 52,307
Customer deposits 14,798 16,051
Accrued liabilities:
Salaries and wages 14,647 15,505
Other 13,649 9,716
--------- ---------


Total current liabilities 99,917 101,754

Long-term debt and capital lease obligations, net of current portion 64,382 70,016
Other liabilities 4,023 3,903

Shareholders' equity:
Preferred stock, $.01 par value, 5,000 shares authorized,
none issued or outstanding - -
Common stock, $.01 par value, 200,000 shares authorized, 41,812
and 41,757 issued and outstanding, respectively 418 418
Additional paid-in capital 252,772 251,932
Retained earnings 172,868 174,891
Accumulated other comprehensive loss (743) (389)
--------- ---------
425,315 426,852
--------- ---------

Total liabilities and shareholders' equity $ 593,637 $ 602,525
========= =========
</TABLE>




See notes to condensed consolidated financial statements.

4
PLEXUS CORP.
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(in thousands)
Unaudited
<TABLE>
<CAPTION>
Three Months Ended
December 31,
-------------------------------------
2001 2000
---- ----
<S> <C> <C>
CASH FLOWS FROM OPERATING ACTIVITIES
Net income (loss) $ (2,023) $ 13,213

Adjustments to reconcile net income to net cash
flows from operating activities:
Depreciation and amortization 8,392 6,744
Income tax benefit from stock option award plans 466 2,755

Deferred income taxes (2,066) (138)

Changes in assets and liabilities:
Accounts receivable 29,987 3,458
Inventories 20,917 (5,276)
Prepaid expenses and other (10,270) (2,030)
Accounts payable (4,376) (12,293)

Customer deposits (1,251) (12)
Accrued liabilities 3,351 (3,030)

Other (119) (2,249)
--------- ---------


Cash flows provided by operating activities 43,008 1,142
--------- ---------

CASH FLOWS FROM INVESTING ACTIVITIES
Purchases of short-term investments - (475)
Sales and maturities of short-term investments 20,300 -
Payments for property, plant and equipment (6,650) (23,614)
Other
64 -
--------- ---------

Cash flows provided by (used in) investing activities 13,714 (24,089)
--------- ---------

CASH FLOWS FROM FINANCING ACTIVITIES
Proceeds from debt 100,188 139,488
Payments on debt and capital lease obligations (104,897) (239,328)
Proceeds from exercise of stock options 374 583
Net borrowings under asset securitization facility (3,765) 30,000
Issuances of common stock - 163,700
--------- ---------
Cash flows provided by (used in) financing activities (8,100) 94,443
--------- ---------
Effect of foreign currency translation on cash and cash
equivalents (53) 162
--------- ---------

Net increase in cash and cash equivalents 48,569 71,658
Cash and cash equivalents:
Beginning of period 84,591 5,293
--------- ---------
End of period $ 133,160 $ 76,951
========= =========
</TABLE>


See notes to condensed consolidated financial statements.



5
PLEXUS CORP.
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
FOR THE THREE MONTHS ENDED DECEMBER 31, 2001
UNAUDITED

NOTE 1 - BASIS OF PRESENTATION

The condensed consolidated financial statements included herein have
been prepared by Plexus Corp. ("Plexus" or the "Company") without audit and
pursuant to the rules and regulations of the United States Securities and
Exchange Commission. In the opinion of the Company, the financial statements
reflect all adjustments, which include normal recurring adjustments necessary to
present fairly the financial position of the Company as of December 31, 2001,
and the results of operations for the three months ended December 31, 2001 and
2000, and the cash flows for the same three-month periods.

Certain information and footnote disclosures normally included in
financial statements prepared in accordance with generally accepted accounting
principles have been condensed or omitted pursuant to the SEC rules and
regulations dealing with interim financial statements. However, the Company
believes that the disclosures made in the condensed consolidated financial
statements included herein are adequate to make the information presented not
misleading. It is suggested that these condensed consolidated financial
statements be read in conjunction with the financial statements and notes
thereto included in the Company's 2001 Annual Report on Form 10-K.

The condensed consolidated balance sheet data as of September 30, 2001
was derived from audited financial statements, but does not include all
disclosures required by generally accepted accounting principles.

NOTE 2 - INVENTORIES

The major classes of inventories are as follows (in thousands):
<TABLE>
<CAPTION>
December 31, September 30,
2001 2001
-------------- --------------
<S> <C> <C>
Assembly parts $ 83,373 $ 98,483
Work-in-process 26,866 31,911
Finished goods 4,121 5,015
-------- --------
$114,360 $135,409
======== ========
</TABLE>

NOTE 3 - ASSET SECURITIZATION FACILITY

In fiscal 2001, the Company entered into an agreement to sell up to $50
million of trade accounts receivable without recourse (the "asset securitization
facility") to Plexus ABS Inc. ("ABS"), a wholly owned, limited purpose
subsidiary of the Company. ABS is a separate corporate entity that sells
participation interests in a pool of the Company's accounts receivable to
financial institutions. The financial institutions then receive an ownership and
security interest in the pool of receivables. Accounts receivable sold to
financial institutions, if any, are reflected as a reduction to accounts
receivable in the consolidated balance sheets. The Company has no risk of credit
loss on such receivables as they are sold without recourse. The Company retains
collection and administrative responsibilities on the participation interest
sold as services for ABS and the financial institutions. The agreement expires
in October 2003. As of December 31, 2001, the Company had utilized $19.2 million
of the asset securitization facility. As a result, accounts receivable has been
reduced by $19.2 million as of December 31, 2001, while long-term debt and
capital lease obligations does not include this $19.2 million of
off-balance-sheet financing. The Company incurred financing costs of $0.2
million and $0.6 million under the asset securitization facility for the three
months ended December 31, 2001 and 2000, respectively.





6
NOTE 4 - EARNINGS PER SHARE

The following is a reconciliation of the amounts utilized in the
computation of basic and diluted earnings per share (in thousands, except per
share amounts):
<TABLE>
<CAPTION>
Three Months Ended
December 31,
----------------------------
2001 2000
---- ----
<S> <C> <C>
BASIC EARNINGS PER SHARE:
Net income (loss) $ (2,023) $ 13,213
========== ==========

Basic weighted average shares outstanding 41,782 40,290
========== ==========

BASIC EARNINGS PER SHARE $ (0.05) $ 0.33
========== ==========

DILUTED EARNINGS PER SHARE:
Net income (loss) $ (2,023) $ 13,213
========== ==========

Weighted average shares outstanding 41,782 40,290
Dilutive effect of stock options - 2,612
---------- ----------
Diluted weighted average shares outstanding 41,782 42,902
========== ==========

DILUTED EARNINGS PER SHARE $ (0.05) $ 0.31
========== ==========
</TABLE>

For the three months ended December 31, 2001, the calculations of
earnings per share on a diluted basis excludes the impact of stock options,
since they would result in an antidilutive effect.

NOTE 5 - ACQUISITION

On January 8, 2002, the Company completed its acquisition of certain
assets of MCMS, Inc. ("MCMS"), an electronic manufacturing service provider, for
approximately $45 million in cash subject to purchase price adjustments. The
assets purchased from MCMS, which is in Chapter 11 bankruptcy proceedings,
include facilities located in Penang, Malaysia: Xiamen, China; and Nampa, Idaho.
The acquisition did not include any interest-bearing debt, but included the
assumption of certain specific liabilities. The Company will record the
acquisition utilizing the accounting principles promulgated by Statement of
Financial Accounting Standards ("SFAS") No.'s 141 and 142. The results from
operations of the assets acquired from MCMS will be reflected in the Company's
financial statements from the date of acquisition.

NOTE 6 - BUSINESS SEGMENT AND GEOGRAPHIC INFORMATION

The Company operates in one business segment. The Company provides
product realization services to electronic original equipment manufactures
("OEMs"). The Company has two reportable geographic regions: North America and
Europe. As of December 31, 2001, the Company had 25 manufacturing and
engineering facilities in North America and Europe to serve these OEMs. The
Company uses an internal management reporting system, which provides important
financial data, to evaluate performance and allocate the Company's resources on
a geographic basis. Interregion transactions are generally recorded at amounts
that approximate arm's length transactions. Certain corporate expenses are
allocated to these regions and are included for performance evaluation. The
accounting policies for the regions are the same as for the Company taken as a
whole. Geographic net sales information reflects the origin of the product
shipped. Asset information is based on the physical location of the asset.







7
<TABLE>
<CAPTION>
Three months ended
December 31,
2001 2000
---- ----
<S> <C> <C>
Net sales (in thousands):

North America $182,894 $250,494
Europe 17,324 21,603
-------- --------
$200,218 $272,097
======== ========

<CAPTION>

December 31, September 30,
2001 2001
---- ----
<S> <C> <C>
Long-lived assets (in thousands):

North America $183,299 $183,065
Europe 34,860 37,027
-------- --------
$218,159 $220,092
======== ========

</TABLE>


NOTE 7 - CONTINGENCY

The Company (along with many other companies) has been sued by the
Lemelson Medical, Education & Research Foundation Limited Partnership
("Lemelson") related to alleged possible infringement of certain Lemelson
patents. The Company had requested a stay of action pending developments in
other related litigation which has been granted. The Company believes the
vendors from whom the patent-related equipment was purchased may contractually
indemnify the Company. If a judgment is rendered and/or a license fee required,
it is the opinion of management of the Company that such judgment would not be
material to the consolidated financial position of the Company or the results of
its operations.

NOTE 8 - RESTRUCTURING COSTS

In response to the reduction in the Company's sales levels and reduced
capacity utilization, the Company reduced its cost structure through the
reduction of its work force and the write-off of certain under-utilized assets.
The Company recorded a pre-tax charge during its first quarter of fiscal 2002 of
$2.8 million associated with this restructuring. As of December 31, 2001,
recorded liabilities related to these restructuring activities were not
significant and are expected to be paid out within the next twelve months.

NOTE 9 - RELATED PARTY TRANSACTIONS

The Company has provided certain engineering design and development
services for MemoryLink Corp. which develops electronic products. The Chairman
of the Board of the Company is a shareholder and director of MemoryLink. As of
December 31, 2001, the Company had $1.5 million in accounts receivable due from
MemoryLink and has fully reserved for this delinquent amount. Subsequent to
December 31, 2001, the Company received a payment of $100,000, and has converted
the balance into a $650,000 promissory note and a $750,000 minority equity
interest in MemoryLink. The promissory note and minority equity interest remain
fully reserved for.

NOTE 10 - NEW ACCOUNTING PRONOUNCEMENTS

In July 2001, SFAS No. 141, "Business Combinations" and No. 142,
"Goodwill and Other Intangible Assets" were issued. These statements eliminate
the pooling-of-interests method of accounting for business combinations and
require that goodwill and certain intangible assets not be amortized. Instead,
these assets will be reviewed for impairment annually with any related losses
recognized in earnings when incurred. SFAS No. 141 was effective for business
combinations completed subsequent to June 30, 2001. SFAS No. 142 will be
effective for the Company's first quarter of fiscal 2003 for existing goodwill
and intangible assets. The Company is currently evaluating the impact of SFAS
No. 142.




8
In August 2001, SFAS No. 143, "Accounting for Asset Retirement
Obligations" was issued. SFAS No. 143 sets forth the financial accounting and
reporting to be followed for obligations associated with the retirement of
tangible long-lived assets and the associated asset retirement costs. SFAS No.
143 requires entities to record the fair value of a liability for an asset
retirement obligation in the period in which it is incurred if a reasonable
estimate of fair value can be made. The associated asset retirement costs are to
be capitalized as part of the carrying amount of the long-lived asset.
Subsequently, the recorded liability will be accreted to its present value and
the capitalized costs will be depreciated. SFAS No. 143 will be effective for
the Company's first quarter of fiscal 2003 and is not expected to have a
material effect on its financial position or results of operations.

In October 2001, SFAS No. 144, "Accounting for the Impairment or
Disposal of Long-Lived Assets" was issued. SFAS No. 144 modifies and expands the
financial accounting and reporting for the impairment or disposal of long-lived
assets other than goodwill, which is specifically addressed by SFAS No. 142.
SFAS No. 144 maintains the requirement that an impairment loss be recognized for
a long-lived asset to be held and used if its carrying value is not recoverable
from its undiscounted cash flows, with the recognized impairment being the
difference between the carrying amount and fair value of the asset. With respect
to long-lived assets to be disposed of other than by sale, SFAS No. 144 requires
that the asset be considered held and used until it is actually disposed of, but
requires that its depreciable life be revised in accordance with APB Opinion No.
20, "Accounting Changes." SFAS No. 144 also requires that an impairment loss be
recognized at the date a long-lived asset is exchanged for a similar productive
asset. SFAS No. 144 will be effective for the Company's first quarter of fiscal
2003. The Company is currently evaluating the impact of SFAS No. 144.


ITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND
RESULTS OF OPERATIONS

"SAFE HARBOR" CAUTIONARY STATEMENT UNDER THE PRIVATE SECURITIES LITIGATION
REFORM ACT OF 1995:

The statements contained in the Form 10-Q which are not historical
facts (such as statements in the future tense and statements including
"believe," "expect," "intend," "anticipate" and similar concepts, and statements
in "Additional Disclosures Concerning Liquidity and Capital Resources, including
Off-Balance Sheet Arrangements") are forward-looking statements that involve
risks and uncertainties, including, but not limited to:

- the ability to integrate MCMS's and other acquired companies'
operations,
- the economic performance of the electronics and technology
industries,
- the risk of customer delays, changes, or cancellations in both
on-going and new programs,
- the Company's ability to secure new customers and maintain its
and MCMS' and other acquired operations' current customer
base,
- the results of cost reduction efforts,
- the impact of capacity utilization and the Company's ability
to manage fixed costs,
- material cost fluctuations and the adequate availability of
components and related parts for production,
- the effect of changes in average selling prices,
- the effect of start-up costs of new programs and facilities,
- the effect of general economic conditions and world events
(such as the September 11 attacks),
- the effect of the impact of increased competition, and
- other risks detailed below, especially in "Risk Factors" and
otherwise herein and in the Company's Securities and Exchange
Commission ("SEC") filings.



9
OVERVIEW

The Company provides product realization services to original equipment
manufacturers, or OEMs, in the networking/datacommunications, medical,
industrial, computer and transportation industries. We provide advanced
electronics design, manufacturing and testing services to our customers and
focus on complex, high-end products. We offer our customers the ability to
outsource all stages of product realization, including: development and design,
materials procurement and management, prototyping and new product introduction,
testing, manufacturing and after-market support. The following information
should be read in conjunction with our consolidated financial statements
included herein and the "Risk Factors" section beginning on page 17.

We provide contract manufacturing services on either a turnkey basis,
where we procure some or all of the materials required for product assembly, or
on a consignment basis, where the customer supplies some, or occasionally all,
materials necessary for product assembly. Turnkey services include materials
procurement and warehousing in addition to manufacturing and involve greater
resource investment and inventory risk management than consignment services.
Turnkey manufacturing currently represents almost all of our net sales. Turnkey
sales typically generate higher sales and higher gross profit dollars with lower
gross margin percentages than consignment sales due to the inclusion of
component costs, and related markup, in our net sales. However, turnkey
manufacturing involves the risk of inventory management, and a change in
component costs can directly impact average selling prices, gross margins and
our net sales. Due to the nature of turnkey manufacturing, our quarterly and
annual results are affected by the level and timing of customer orders,
fluctuations in materials costs, the degree of automation used in the assembly
process and capacity utilization.

MERGERS AND ACQUISITIONS

On January 8, 2002, the Company completed its acquisition of certain
assets of MCMS, Inc. ("MCMS"), an electronic manufacturing service ("EMS")
provider, for approximately $45 million in cash subject to purchase price
adjustments. The assets purchased from MCMS, which is in Chapter 11 bankruptcy
proceedings, include facilities located in Penang, Malaysia; Xiamen, China; and
Nampa, Idaho. The Company is transferring operations from MCMS's former Raleigh,
North Carolina and San Jose, California facilities to the Company's other
facilities. MCMS' Monterrey, Mexico and Colfontaine, Belgium operations were not
included in the transaction. The acquisition did not include any MCMS
interest-bearing debt, but included the assumption of certain specific
liabilities. The Company will record the acquisition utilizing the accounting
principles promulgated by Statement of Financial Accounting Standards ("SFAS")
No.'s. 141 and 142. The results from operations of the assets acquired from MCMS
will be reflected in the Company's financial statements from the date of
acquisition.

On May 23, 2001, the Company acquired Qtron, Inc. ("Qtron"), a
privately held EMS provider located in San Diego, California. The Company
purchased all of the outstanding shares of Qtron for approximately $29.0 million
in cash, paid outstanding Qtron notes payable of $3.6 million to Qtron
shareholders and thereby assumed liabilities of $47.4 million, including capital
lease obligations of $18.8 million for a new manufacturing facility. The excess
of the cost over the fair value of the net assets acquired of approximately $24
million has been recorded as goodwill and is being amortized over 15 years. The
purchase price is subject to certain adjustments. The results of Qtron's
operations have been reflected in the Company's financial statements from the
date of acquisition.

On December 21, 2000, the Company merged with e2E Corporation ("e2E"),
a privately held PCB design and engineering service provider for electronic
OEMs, including the issuance of 462,625 shares of its common stock. The
transaction was accounted for as a pooling-of-interests. Costs associated with
this merger in the amount of $1.0 million have been expensed as required.
Results prior to October 1, 2000 were not restated, as they would not differ
materially from reported results.

RESULTS OF OPERATIONS

Net sales. Net sales for the three months ended December 31, 2001,
decreased 26 percent to $200 million from $272 million for the three months
ended December 31, 2000. The Company's reduced sales levels reflect the
continued slowdown in technology markets, primarily network/datacommunications
and computer industries. The Company was also affected by a relatively sharp
downturn in orders and forecasts beginning after the September 11 attacks, as a
consequence of the economic uncertainties resulting from the attacks and their
aftermath; the downturn



10
affected sales in the first quarter and customer forecasts thereafter. These
factors resulted in these customers' forecasts and orders becoming more
cautious. These factors will continue to affect fiscal second quarter sales. The
Company currently expects second quarter sales to be in the range of $215
million to $225 million. This range includes estimated sales of $20 million to
$25 million as a result of the MCMS acquisition. However, the Company's results
will ultimately depend on the actual order levels.

Our largest customer for the three months ended December 31, 2001, was
General Electric Company, which accounted for 12 percent of sales, compared to
the three months ended December 31, 2000 when Lucent Technologies Inc., and
Cisco Systems, Inc., accounted for 14 percent and 13 percent of sales,
respectively. Sales to our ten largest customers accounted for 51 percent of
sales for the three months ended December 31, 2001 compared to 59 percent for
the three months ended December 31, 2000. As with sales to most of our
customers, sales to our largest customers may vary from time to time depending
on the size and timing of customer program commencement, termination, delays,
modifications and transitions. We remain dependent on continued sales to our
significant customers, and we generally do not obtain firm, long-term purchase
commitments from our customers. In addition, we currently expect an increasing
percentage of our sales may come from emerging technology companies, including
start-ups, mainly in the networking/datacommunications market sector. Customer
forecasts can and do change as a result of their end-market demand and other
factors. Although any material change in orders from these or other customers
could materially affect our results of operations, we are dedicated to
diversifying our customer base and decreasing our dependence on any particular
customer(s) or concentration in one particular industry.

Our sales for the three months ended December 31, 2001 and (2000),
respectively, by industry were as follows: networking/datacommunications 36
percent (40 percent), medical 29 percent (22 percent), industrial 20 percent (20
percent), computer 8 percent (10 percent) and transportation/other 7 percent (8
percent). The relative changes in significance primarily reflect the
industry-wide weaknesses in the networking/datacommunications and computer
industries.

Gross profit. Gross profit for the three months ended December 31,
2001, decreased 60 percent to $15.5 million from $38.4 million for the three
months ended December 31, 2000. The gross margin for the three months ended
December 31, 2001, was 7.7 percent, compared to 14.1 percent for the three
months ended December 31, 2000.

Our gross margins reflect a number of factors that can vary from period
to period, including product and service mix, the level of start-up costs and
efficiencies of new programs, product life cycles, sales volumes, price erosion
within the electronics industry, capacity utilization of surface mount and other
equipment, labor costs and efficiencies, the management of inventories,
component pricing and shortages, average sales prices, the mix of turnkey and
consignment business, fluctuations and timing of customer orders, changing
demand for customers' products and competition within the electronics industry.
Overall gross margins continue to be affected by a slowdown in end-market
demand, particularly in the networking/datacommunications industry and its
impact on our capacity utilization.

In addition, gross margins continue to be affected by acquisitions. In
particular, gross margins resulting from the Mexico turnkey operations and
Keltek (United Kingdom) operations (both of which were acquired by the Company
in fiscal 2000) and Qtron are below our historical gross margins as we work to
integrate these acquisitions into our product realization model and increase
their capacity utilization. These and other factors can cause variations in our
operating results. Although our focus is on maintaining and expanding gross
margins, there can be no assurance that gross margins will not continue to
decrease in future periods. Gross margins have decreased from fiscal 2001
results due to the impact of the Company's recent acquisitions and its reduced
manufacturing capacity utilization.

Most of the research and development we conduct is paid for by our
customers and is, therefore, included in the cost of sales. We conduct other
research and development, but that research and development is not specifically
identified and we believe such expenses are less than one percent of our net
sales.

Operating expenses. Selling and administrative (S&A) expenses for the three
months ended December 31, 2001, increased to $14.0 million from $12.8 million
for the three months ended December 31, 2000. As a percentage of net sales, S&A
expenses were 7.0 percent for the three months ended December 31, 2001, compared




11
to 4.7 percent for the three months ended December 31, 2000. The increase in
dollar terms was due primarily to increases in our sales and marketing efforts
and information systems support. In addition, the Company's decision to increase
reserves for bad debts due to increased credit risk resulting from the overall
weakness in the economy also impacted these expenses. The increase in operating
expenses as a percentage of net sales results from these factors combined with
the reduction in the Company's sales. We anticipate that future S&A expenses
will increase in absolute dollars due primarily to the MCMS acquisition, but
should remain at approximately seven percent of net sales in the near term.

Amortization of goodwill increased to $1.3 million for the three months
ended December 31, 2001 from $0.9 million for the three months ended December
31, 2000. This was a result of the acquisitions of the Mexico turnkey
operations, Keltek and Qtron over the last two years which resulted in
additional goodwill. See "New Accounting Pronouncements" below regarding
upcoming changes to the rules relating to accounting for goodwill and
amortization thereof. The new accounting rules will require the Company to
regularly review its goodwill and other intangible assets, particularly goodwill
resulting from prior acquisitions, to determine whether it has become impaired.
Once these new changes are adopted by the Company, we will no longer amortize
goodwill on a set schedule; however, we will need to take a charge against
earnings for a write-off of goodwill in any period in which we determine that
such goodwill has become impaired.

In response to the reduction in our sales levels and reduced capacity
utilization, the Company reduced its cost structure through the reduction of its
work force and writing off certain under-utilized assets. The Company recorded a
pre-tax charge during the three months ended December 31, 2001 of $2.8 million
associated with this restructuring. For the three months ended March 31, 2002,
the Company will incur additional planned capacity reductions at certain sites
which it currently expects will result in restructuring charges of approximately
$3 million to $4 million. In addition, the Company will incur transaction
integration charges in the second quarter of fiscal 2002, expected to be in the
range of $2.0 million to $3.0 million associated with the MCMS asset purchase.

Merger and acquisition costs of approximately $1.0 million for the
three months ended December 31, 2000, were related to the e2E acquisition.

Income taxes. Income taxes decreased to $(1.3) million for the three
months ended December 31, 2001, from $9.4 million for the three months ended
December 31, 2000. Our effective income tax rate has remained at approximately
40 percent excluding non-tax-deductible merger expenses. This rate approximates
the blended federal and state statutory rate. In fiscal 2002, we expect the
annual effective tax rate to decrease slightly as foreign operations increase as
a percentage of the Company's total operations.

LIQUIDITY AND CAPITAL RESOURCES

Cash flows provided by operating activities were $43.0 million for the
three months ended December 31, 2001, compared to cash flows provided by
operating activities of $1.1 million for the three months ended December 31,
2000. During the three months ended December 31, 2001, cash provided by
operating activities was primarily related to decreases in accounts receivable
and inventories and increases in accrued liabilities which were offset by
increases in prepaid expenses and other assets and decreases in accounts
payable. The decrease in our inventory levels resulted in the Company increasing
annualized inventory turns to 5.9 turns for the three months ended December 31,
2001 from 5.3 turns for the year ended September 30, 2001. This increase in
inventory turns was primarily the result an improved marketplace for components
and improved inventory management.

Cash flows provided by investing activities totaled $13.7 million for
the three months ended December 31, 2001. The primary sources were sales and
maturities of short-term investments which were offset by payments for property,
plant and equipment. Subsequent to December 31, 2001, the Company utilized its
existing cash resources to fund the approximately $45 million cash purchase
price of certain assets of MCMS.

We utilize available cash, debt and leases to fund our operating
requirements. We utilize operating leases primarily in situations where
technical obsolescence concerns are determined to outweigh the benefits of
financing the equipment purchase. We currently estimate capital expenditures for
fiscal 2002 will be approximately $25 million to $30 million. This estimate does
not include MCMS or any other acquisitions which the Company may undertake.


12
Cash flows used in financing activities totaled $8.1 million for the
three months ended December 31, 2001 primarily represent net payments on our
credit and asset securitization facilities. The ratio of total debt to equity
was 0.4 to 1 as of December 31, 2001, and September 30, 2001.

The Company has an unsecured revolving credit facility (the "Credit
Facility") with a group of banks. The Credit Facility allows us to borrow up to
$250 million, of which we had borrowed approximately $40 million as of December
31, 2001. Borrowing capacity utilized under the Credit Facility will be either
through revolving or other loans or through guarantees of commercial paper.
Interest on borrowings is computed at the applicable eurocurrency rate on the
agreed currency, plus any commitment fees. The Credit Facility matures on
October 25, 2003, and requires among other things maintenance of minimum
interest expense coverage and maximum leverage ratios.

Pursuant to a public offering of shares of common stock in the first
quarter of fiscal 2001, the Company issued 3.45 million shares of common stock
for $50 per share, with an underwriters discount of $2.375 per share. The
Company received net proceeds of approximately $164.3 million, after discounts
and commissions to the underwriters of approximately $8.2 million. Additional
expenses were approximately $0.6 million. The net proceeds from the offering
were utilized to refinance, in part, existing debt and finance capital
expenditures, and capacity expansion and the Qtron acquisition. The remaining
net proceeds were used for general corporate purposes and working capital.

In fiscal 2001, the Company entered into an agreement to sell up to $50
million of trade accounts receivable without recourse to Plexus ABS Inc.
("ABS"), a wholly owned, limited purpose subsidiary of the Company. ABS is a
separate corporate entity that sells participating interests in a pool of the
Company's accounts receivable to financial institutions. The financial
institutions then receive an ownership and security interest in the pool of
receivables. As of December 31, 2001, we had utilized the maximum amount
currently available of $19.2 million. As a result, accounts receivable has been
reduced by $19.2 million as of December 31, 2001, while long-term debt and
capital lease obligations does not include this $19.2 million of
off-balance-sheet financing. See Note 3 in the Notes to Condensed Consolidated
Financial Statements.

Effective in the first quarter of fiscal 2002, the Plexus board of
directors adopted a stock repurchase program, authorizing the repurchase of up
to 1.0 million shares of common stock not to exceed $25 million. Through
December 31, 2001, the Company had not yet repurchased any shares.

Our credit facilities, leasing capabilities, cash and short-term
investments and projected cash from operations should be sufficient to meet our
working capital and capital requirements through fiscal 2002 and the foreseeable
future. We have not paid cash dividends in the past, and do not anticipate
paying them in the foreseeable future. We anticipate using earnings to support
our business.

DISCLOSURE ABOUT CRITICAL ACCOUNTING POLICIES

On December 12, 2001, the SEC issued FR-60, "Cautionary Advice
Regarding Disclosure About Critical Accounting Policies." FR-60 is an
intermediate step to alert companies to the need for greater investor awareness
of the sensitivity of financial statements to the methods, assumptions, and
estimates underlying their preparation including the judgments and uncertainties
affecting the application of those policies, and the likelihood that materially
different amounts would be reported under different conditions or using
different assumptions.

The Company's accounting policies are disclosed in its 2001 Report on
Form 10-K. There have been no changes material to these policies during the
first quarter of fiscal 2002. The more critical of these policies include
revenue recognition and the use of estimates in valuing inventory and accounts
receivable.

Revenue Recognition -- We continued to recognize revenues primarily
when products are shipped. Revenue and profit relating to product design and
development contracts are generally recognized utilizing the
percentage-of-completion method. The use of percentage-of-completion accounting
does involve the use of estimates, but accounts for less than 10% of the
Company's total revenues. We used the same methods to recognize revenues under
percentage-of-completion accounting for this quarter as we have in the past. Our
revenue recognition policies are in accordance with Staff Accounting Bulletin
("SAB") No. 101, "Revenue Recognition in Financial Statements."


13
Inventories -- We value inventories primarily at the lower of cost or
market. Cost is determined by the first-in, first-out (FIFO) method. Valuing
inventories at the lower of cost or market requires the use of estimates and
judgment. As discussed later under "Risk Factors," our customers may cancel
their orders, change production quantities or delay production for a number of
reasons. Any of these, or certain additional actions, could impact the valuation
of our inventory. We continued to use the same techniques to value our inventory
as we have in the past. Any actions taken by our customers that could impact the
value of our inventory are considered when determining the lower of cost or
market valuations.

Accounts Receivable -- We value accounts receivable net of an allowance
for uncollectible accounts. This allowance is based on our estimate of the
portion of the receivables that will not be collected in the future. We
continued to apply the same techniques to compute this allowance at December 31,
2001 as we have in the past. However, the ultimate collectibility of a
receivable is dependent upon the financial condition of an individual customer
which could change rapidly and without advance warning.

ADDITIONAL DISCLOSURES CONCERNING LIQUIDITY AND CAPITAL RESOURCES, INCLUDING
"OFF-BALANCE SHEET" ARRANGEMENTS

On January 22, 2002, the SEC issued FR-61, "Commission Statement about
Management's Discussion and Analysis of Financial Condition and Results of
Operations." While the SEC intends to consider rulemaking regarding the topics
addressed in this statement and other topics covered by MD&A, the purpose of
this statement is to suggest steps that issuers should consider in meeting their
current disclosure obligations with respect to the topics described.

The Company is currently evaluating FR-61 and the effects it may have,
if any, on this, and future, filings. Below are our responses to each of the
areas addressed by FR-61. Any statements in this section which discuss or are
related to future dates or periods are "forward-looking statements."

1. Liquidity Disclosures

The Company includes a discussion of liquidity and capital resources in
Management's Discussion and Analysis. More specifically, FR-61 requires
management to consider the following to identify trends, demands, commitments,
events and uncertainties that require disclosure:

a. Provisions in financial guarantees or commitments, debt or lease
agreements or other arrangements that could trigger a requirement for
an early payment, additional collateral support, changes in terms,
acceleration of maturity, or the creation of an additional financial
obligation, such as adverse changes in the registrant's credit rating,
financial ratios, earnings, cash flows, or stock price, or changes in
the value of underlying, linked or indexed assets. As disclosed in its
2001 Report on Form 10-K, the Company issued a note payable on demand
for approximately $6.9 million to the prior owners of Keltek. As of
December 31, 2001, there has been no demand for payment. In addition,
as disclosed in the 2001 Report on Form 10-K, the Company's Credit
Facility requires the Company to maintain certain financial ratios to
comply with the terms of the agreement. The Company has continued in
compliance with these covenants as of December 31, 2001, the latest
measurement date. If the Company defaults on any of these provisions,
it could require the repayment of the amounts outstanding
(approximately $40 million as of December 31, 2001).

b. Circumstances could impair the registrant's ability to continue to
engage in transactions that have been integral to historical operations
or are financially or operationally essential, or that could render
that activity commercially impracticable, such as the inability to
maintain a specified investment grade credit rating, level of earnings,
earnings per share, financial ratios, or collateral. Our material risk
factors are disclosed in this Report on Form 10-Q. However, we are not
aware of anything that could reasonably be expected to impair our
ability to continue to engage in the historical operations of the
Company at this time.

c. Factors specific to the registrant and its markets that the
registrant expects to be given significant weight in the determination
of the registrant's credit rating or will otherwise affect the
registrant's ability to raise short-term and long-term financing. Our
material risk factors are disclosed in this Report on Form 10-Q.
However, we are not aware of anything that could reasonably be given
significant weight in the



14
determination of our credit rating or will otherwise affect the
Company's ability to raise short-term and long-term financing.

d. Guarantees of debt or other commitments to third parties. The Company
does not have any significant guarantees of debt or other commitments
to third parties.

e. Written options on non-financial assets (for example, real estate
puts). The Company does not have any written options on non-financial
assets.

2. Off-Balance Sheet Arrangements

FR-61 indicates that registrants should consider the need to provide
disclosures concerning transactions, arrangements and other relationships with
unconsolidated entities or other persons that are reasonably likely to affect
materially liquidity or the availability of or requirements for capital
resources. The Company disclosed in Footnote 4 to the financial statements in
its 2001 Report on Form 10-K and Footnote 3 to its financial statements for the
three months ended December 31, 2001 in this Report of Form 10-Q, a
securitization that the Company entered into in fiscal 2001. The Company's
wholly owned, limited purpose subsidiary, Plexus ABS Inc., may purchase up to
$50 million of receivables from the Company and sell participating interests to
financial institutions; as of September 30, 2001, $22.9 million had been
borrowed under this facility. Any interests sold to the financial institutions
are removed from the balance sheet as the Company has no risk of loss on such
receivables as they are sold without recourse.

The Company also leases various assets under both capital and operating
leases. The aggregate payments under the capital leases and operating leases are
disclosed in Footnotes 4 and 9, respectively, to our financial statements in our
2001 Report on Form 10-K. There were no significant changes to these lease
arrangements during the first quarter of 2002; however, the Company assumed
certain operating leases associated with the January 8, 2002 acquisition of
certain assets of MCMS. These leases primarily relate to production facilities
in Malaysia and China.

3. Disclosures about Contractual Obligations and Commercial Commitments

In FR-61, the SEC notes that current accounting standards require
disclosure concerning a registrant's obligations and commitments to make future
payments under contracts, such as debt and lease agreements, and under
contingent commitments, such as debt guarantees. They also indicate that the
disclosures responsive to these requirements usually are located in various
parts of a registrant's filings. The SEC believes that investors would find it
beneficial if aggregated information about contractual obligations and
commercial commitments were provided in a single location so that a total
picture of obligations would be readily available. They further suggested that
one useful aid to presenting the total picture of a registrant's liquidity and
capital resources and the integral role of on- and off-balance sheet
arrangements may be schedules of contractual obligations and commercial
commitments as of the latest balance sheet date.

We are no different than most other registrants in that our disclosures
are located in various parts of our regulatory filings including, Footnotes 1,
4, 6, 9, 10 and 13 to our financial statements in our 2001 Report on Form 10-K,
and Footnotes 1, 3, 5 and 8 to our financial statements for the three months
ended December 31, 2001 in this report. In addition, the Company prepared
schedules as of September 30, 2001 suggested by the SEC in FR -61. Information
in the following table is in thousands as of September 30, 2001.




15
<TABLE>
<CAPTION>
PAYMENTS DUE BY PERIOD

LESS THAN 1-3 4 - 5 AFTER 5
CONTRACTUAL OBLIGATIONS TOTAL 1 YEAR YEARS YEARS YEARS
<S> <C> <C> <C> <C> <C>

LONG-TERM DEBT $ 131 $ 11 $ 24 $ 27 $ 69

CAPITAL LEASE OBLIGATIONS 26,544 1,517 3,273 2,177 19,577
OPERATING LEASES 121,867 12,907 27,024 23,384 58,552

UNCONDITIONAL PURCHASE
OBLIGATIONS*
OTHER LONG-TERM OBLIGATIONS** 51,516 6,915 44,601 - -
---------- ------- --------- -------- --------
TOTAL CONTRACTUAL CASH OBLIGATIONS $ 200,058 $21,350 $ 74,922 $ 25,588 $ 78,198
---------- ------- --------- -------- --------
</TABLE>

* - There are no unconditional purchase obligations other than inventory and
property, plant and equipment purchases in the ordinary course of business.

** - Other long-term obligations consist of $6.9 million notes payable on demand
to the former shareholders of Keltek and $44.6 million outstanding borrowings
under our unsecured revolving credit facility.

As of September 30, 2001, other than the Company's asset securitization ($22.9
million as of September 30, 2001), the Company did not have, and was not subject
to, any other lines of credit, standby letters of credit, guarantees, standby
repurchase obligations, or other commercial commitments.

DISCLOSURES ABOUT CERTAIN TRADING ACTIVITIES THAT INCLUDE NON-EXCHANGE TRADED
CONTRACTS ACCOUNTED FOR AT FAIR VALUE

The Company does not have any trading activities that include
non-exchange traded contracts accounted for at fair value.

DISCLOSURES ABOUT EFFECTS OF TRANSACTIONS WITH RELATED AND CERTAIN OTHER PARTIES

The Company disclosed the effects of transactions with a related party
in Footnote 1 to our financial statements in our 2001 Report on Form 10-K. An
update of these transactions was included in Footnote 9 to our financial
statements for the three months ended December 31, 2001 in this report. There
were no other significant transactions with related and certain other parties.

NEW ACCOUNTING PRONOUNCEMENTS

In July 2001, SFAS No. 141, "Business Combinations" and No. 142,
"Goodwill and Other Intangible Assets" were issued. The statements eliminate the
pooling-of-interests method of accounting for business combinations and require
that goodwill and certain intangible assets not be amortized. Instead, these
assets will be reviewed for impairment annually with any related losses
recognized in earnings when incurred. SFAS No. 141 was effective for the Company
for business combinations completed subsequent to June 30, 2001. SFAS No. 142
will be effective for the Company's first quarter of fiscal 2003 for existing
goodwill and intangible assets. The Company is currently evaluating the impact
of SFAS No. 142.

In August 2001, SFAS No. 143, "Accounting for Asset Retirement
Obligations" was issued. SFAS No. 143 sets forth the financial accounting and
reporting to be followed for obligations associated with the retirement of
tangible long-lived assets and the associated asset retirement costs. SFAS No.
143 requires entities to record the fair value of a liability for an asset
retirement obligation in the period in which it is incurred if a reasonable
estimate of fair value can be made. The associated asset retirement costs are to
be capitalized as part of the carrying amount of the long-lived asset.
Subsequently, the recorded liability will be accreted to its present value and
the capitalized costs



16
will be depreciated. SFAS No. 143 will be effective for the Company's first
quarter of fiscal 2003 and is not expected to have a material effect on its
financial position or results of operations.

In October 2001, SFAS No. 144, "Accounting for the Impairment or
Disposal of Long-Lived Assets" was issued. SFAS No. 144 modifies and expands the
financial accounting and reporting for the impairment or disposal of long-lived
assets other than goodwill, which is specifically addressed by SFAS No. 142.
SFAS No. 144 maintains the requirement that an impairment loss be recognized for
a long-lived asset to be held and used if its carrying value is not recoverable
from its undiscounted cash flows, with the recognized impairment being the
difference between the carrying amount and fair value of the asset. With respect
to long-lived assets to be disposed of other than by sale, SFAS No. 144 requires
that the asset be considered held and used until it is actually disposed of, but
requires that its depreciable life be revised in accordance with APB Opinion No.
20, "Accounting Changes." SFAS No. 144 also requires that an impairment loss be
recognized at the date a long-lived asset is exchanged for a similar productive
asset. SFAS No. 144 will be effective for the Company's first quarter of fiscal
2003. The Company is currently evaluating the impact of SFAS No. 144.

RISK FACTORS

OUR CUSTOMER REQUIREMENTS AND OPERATING RESULTS VARY SIGNIFICANTLY FROM QUARTER
TO QUARTER, WHICH COULD NEGATIVELY IMPACT THE PRICE OF OUR COMMON STOCK; RECENT
DEMAND HAS CONTINUED TO BE WEAK.

Our quarterly and annual results may vary significantly depending on
various factors, many of which are beyond our control. These factors include:

- the volume of customer orders relative to our capacity

- the timing of customer orders, particularly in light of the fact that
some of our customers release a significant percentage of their orders
during the last few weeks of a quarter - the typical short life cycle
of our customers' products

- market acceptance of and demand for our customers' products

- changes in our sales mix to our customers

- the timing of our expenditures in anticipation of future orders

- our effectiveness in managing manufacturing processes

- changes in cost and availability of labor and components

- changes in economic conditions

- local events that may affect our production volume, such as local
holidays.

The EMS industry is impacted by the state of the U.S. and global
economies and world events (such as the September 11, 2001 attacks). Any
slowdown in the U.S. or global economies, or in particular in the industries
served by us, may result in our customers reducing their forecasts. The
Company's sales have been, and are expected to continue to be, impacted by the
slowdown in the networking/datacommunications and computer markets, as well as
the economy in general. These factors contributed substantially to the decline
in the Company's net sales in the first quarter of fiscal 2002. As a result, the
demand for our services could continue to be weak or decrease, which in turn
would impact our sales, capacity utilization, margins and results.

Due to the nature of turnkey manufacturing services, our quarterly and
annual results are affected by the level and timing of customer orders,
fluctuations in material costs and availability, and the degree of capacity
utilization in the manufacturing process.

OUR CUSTOMERS MAY CANCEL THEIR ORDERS, CHANGE PRODUCTION QUANTITIES OR DELAY
PRODUCTION.

Electronics manufacturing service providers must provide increasingly
rapid product turnaround for their customers. We generally do not obtain firm,
long-term purchase commitments from our customers and we continue to experience
short lead-times in customer orders. Customers may cancel their orders, change
production quantities or delay production for a number of reasons. The success
of our customers' products in the market affects our business. Cancellations,
reductions or delays by a significant customer or by a group of customers could
seriously harm our operating results. Such cancellations, reductions or delays
have occurred and may continue to occur in response to the slowdown in the
networking/datacommunications market and other sectors of the economy.


17
In addition, we make significant decisions, including determining the
levels of business that we will seek and accept, production schedules, component
procurement commitments, personnel needs and other resource requirements, based
on our estimates of customer requirements. The short-term nature of our
customers' commitments and the possibility of rapid changes in demand for their
products reduces our ability to estimate accurately the future requirements of
those customers.

On occasion, customers may require rapid increases in production, which
can stress our resources and reduce operating margins. Although we have
increased our manufacturing capacity and plan further increases, we may not have
sufficient capacity at any given time to meet all of our customers' demands. In
addition, because many of our costs and operating expenses are relatively fixed,
a reduction in customer demand can harm our gross margins and operating results.

WE MAY NOT BE ABLE TO OBTAIN RAW MATERIALS OR COMPONENTS FOR OUR ASSEMBLIES ON A
TIMELY BASIS OR AT ALL.

We rely on a limited number of suppliers for many components used in
the assembly process. We do not have any long-term supply agreements. At various
times, there have been shortages of some of the electronic components that we
use, and suppliers of some components have lacked sufficient capacity to meet
the demand for these components. During the majority of fiscal 2000 and early
fiscal 2001, component shortages were prevalent in our industry, and in certain
areas have continued to occur. In some cases, supply shortages and delays in
deliveries of particular components have resulted in curtailed production, or
delays in production, of assemblies using that component, which contributed to
an increase in our inventory levels. We expect that shortages and delays in
deliveries of some components will continue. If we are unable to obtain
sufficient components on a timely basis, we may experience manufacturing and
shipping delays, which could harm our relationships with customers and reduce
our sales.

A significant portion of our sales is derived from turnkey
manufacturing in which we provide materials procurement. While most of our
customer contracts permit quarterly or other periodic adjustments to pricing
based on decreases and increases in component prices and other factors, we
typically bear the risk of component price increases that occur between any such
repricings or, if such repricing is not permitted, during the balance of the
term of the particular customer contract. Accordingly, component price increases
could adversely affect our operating results.

THE MAJORITY OF OUR SALES COMES FROM A SMALL NUMBER OF CUSTOMERS AND IF WE LOSE
ANY OF THESE CUSTOMERS, OUR SALES AND OPERATING RESULTS COULD DECLINE
SIGNIFICANTLY.

Sales to our ten largest customers have represented a majority of our
sales in recent periods. Our ten largest customers accounted for approximately
51 percent and 59 percent of our net sales for the three months ended December
31, 2001 and 2000, respectively. The identities of our principal customers have
varied from year to year, and our principal customers may not continue to
purchase services from us at current levels, if at all. Significant reductions
in sales to any of these customers, or the loss of major customers, could
seriously harm our business. If we are not able to timely replace expired,
canceled or reduced contracts with new business, our sales will decrease.

WE MAY HAVE SIGNIFICANT CUSTOMER RELATIONSHIPS WITH EMERGING COMPANIES, WHICH
MAY PRESENT MORE RISKS THAN WITH ESTABLISHED COMPANIES.

We currently anticipate that a significant percentage of our sales will
be to emerging companies, including start-ups, particularly in the
networking/datacommunications market. However, similar to our other customer
relationships, there are no volume purchase commitments under these new
programs, and the revenues we actually achieve may not meet our expectations. In
anticipation of future activities under these programs, we incur substantial
expenses as we add personnel and manufacturing capacity and procure materials.
Because emerging companies do not have a history of operations, it will be
harder for us to anticipate needs and requirements than with established
customers. Our operating results will be harmed if sales do not develop to the
extent and within the time frame we anticipate.

Customer relationships with emerging companies also present special
risks. For example, because they do not have an extensive product history, there
is less demonstration of market acceptance of their products. Also, due



18
to the current economic environment, additional funding for such companies may
be more difficult to obtain. This tightening of financing for start-up
customers, together with many start-up customers' lack of prior earnings and
unproven product markets could potentially increase the Company's credit risk,
especially in accounts receivable and inventories. Although the Company adjusts
its reserves for accounts receivable and inventories for all customers,
including start-up customers, based on the information available, these reserves
may not be adequate.

WE MAY FAIL TO COMPLETE SUCCESSFULLY FUTURE ACQUISITIONS AND MAY NOT INTEGRATE
SUCCESSFULLY ACQUIRED BUSINESSES, WHICH COULD ADVERSELY AFFECT OUR OPERATING
RESULTS.

We have pursued a strategy that has included growth through
acquisitions. We cannot assure you that we will be able to complete successfully
future acquisitions, due primarily to increased competition for the acquisition
of electronics manufacturing service operations. If we are unable to acquire
additional businesses, our growth could be inhibited. Similarly, we cannot
assure you that we will be able to integrate successfully the operations and
management of our recent acquisitions such as Qtron, MCMS or future
acquisitions. Acquisitions involve significant risks that could have a material
adverse effect on us. These risks include:

OPERATING RISKS, SUCH AS THE:

- inability to integrate successfully our acquired operations'
businesses and personnel
- inability to realize anticipated synergies, economies of scale or
other value
- difficulties in scaling up production and coordinating management
of operations at new sites
- strain placed on our personnel, systems and resources
- possible modification or termination of an acquired business
customer program, including cancellation of current or anticipated
programs
- loss of key employees of acquired businesses.

FINANCIAL RISKS, SUCH AS THE:

- dilutive effect of the issuance of additional equity securities
- incurrence of additional debt and related interest costs
- inability to achieve expected operating margins to offset the
increased fixed costs associated with acquisitions, and/or
inability to increase margins at acquired entities to Plexus'
historical levels
- incurrence of large write-offs or write-downs
- amortization and/or impairment of goodwill or other intangible
assets
- unforeseen liabilities of the acquired businesses.

EXPANSION OF OUR BUSINESS AND OPERATIONS MAY NEGATIVELY IMPACT OUR BUSINESS.

We may expand our operations by establishing or acquiring new
facilities or by expanding capacity in our current facilities. We may expand
both in geographical areas in which we currently operate and in new geographical
areas within the United States and internationally. We may not be able to find
suitable facilities on a timely basis or on terms satisfactory to us. Expansion
of our business and operations involves numerous business risks, including the:

- inability to integrate successfully additional facilities or capacity
and to realize anticipated synergies, economies of scale or other value
- additional fixed costs which may not be fully absorbed by the new
business
- difficulties in the timing of expansions, including delays in the
implementation of construction and manufacturing plans
- diversion of management's attention from other business areas during
the planning and implementation of expansions
- strain placed on our operational, financial, management, technical and
information systems and resources
- disruption in manufacturing operations
- incurrence of significant costs and expenses
- inability to locate enough customers or employees to support the
expansion.



19
OPERATING IN FOREIGN COUNTRIES EXPOSES US TO INCREASED RISKS.

We acquired operations in Mexico and the United Kingdom in fiscal 2000.
In addition, as part of the MCMS acquisition, we acquired operations located in
China and Malaysia. We may in the future expand into other international
regions. We have limited experience in managing geographically dispersed
operations and in operating in Mexico and the United Kingdom, and no prior
experience in China and Malaysia. We also purchase a significant number of
components manufactured in foreign countries. Because of these international
aspects of our operations, we are subject to the following risks that could
materially impact our operating results:

- economic or political instability
- transportation delays or interruptions and other effects of less
developed infrastructure in many countries
- foreign exchange rate fluctuations
- utilization of different systems and equipment
- difficulties in staffing and managing foreign personnel and diverse
cultures
- the effects of international political developments.

In addition, changes in policies by the U.S. or foreign governments
could negatively affect our operating results due to changes in duties, tariffs,
taxes or limitations on currency or fund transfers. Our Mexico based operation
utilizes the Maquiladora program, which provides reduced tariffs and eases
import regulations, and we could be adversely affected by changes in that
program. Further, the newly-acquired Chinese and Malaysian subsidiaries
currently receive favorable tax treatment from the governments in those
countries for approximately 5 years.

WE MAY NOT BE ABLE TO MAINTAIN OUR ENGINEERING, TECHNOLOGICAL AND MANUFACTURING
PROCESS EXPERTISE.

The markets for our manufacturing and engineering services are
characterized by rapidly changing technology and evolving process development.
The continued success of our business will depend upon our ability to:

- hire, retain and expand our qualified engineering and technical
personnel
- maintain and enhance our technological capabilities
- develop and market manufacturing services which meet changing customer
needs
- successfully anticipate or respond to technological changes in
manufacturing processes on a cost-effective and timely basis.

Although we believe that our operations utilize the assembly and
testing technologies, equipment and processes that are currently required by our
customers, we cannot be certain that we will develop the capabilities required
by our customers in the future. The emergence of new technology industry
standards or customer requirements may render our equipment, inventory or
processes obsolete or noncompetitive. In addition, we may have to acquire new
assembly and testing technologies and equipment to remain competitive. The
acquisition and implementation of new technologies and equipment may require
significant expense or capital investment which could reduce our operating
margins and our operating results. Our failure to anticipate and adapt to our
customers' changing technological needs and requirements could have an adverse
effect on our business.

FAILURE TO MANAGE OUR GROWTH MAY SERIOUSLY HARM OUR BUSINESS.

We have experienced rapid growth, both internally and through
acquisitions. This growth has placed, and will continue to place, significant
strain on our operations. To manage our growth effectively, we must continue to
improve and expand our financial, operational and management information
systems; continue to develop the management skills of our managers and
supervisors; and continue to train, manage and motivate our employees. If we are
unable to manage our growth effectively, our operating results could be harmed.

The Company has entered into a licensing arrangement for new ERP
software and related information systems. Conversions to new software and
systems are complicated processes, and can cause management and


20
operational disruptions which may affect the Company. Information flow and
production could also be affected if the new software and systems do not perform
as the Company expects.

OUR TURNKEY MANUFACTURING SERVICES INVOLVE INVENTORY RISK.

Most of our contract manufacturing services are provided on a turnkey
basis, where we purchase some or all of the materials required for designing,
product assembling and manufacturing. These services involve greater resource
investment and inventory risk management than consignment services, where the
customer provides these materials. Accordingly, various component price
increases and inventory obsolescence could adversely affect our selling price,
gross margins and operating results.

In its turnkey operations, the Company needs to order parts and
supplies based on customer forecasts, which may be for a larger quantity of
product than is included in the firm orders ultimately received from those
customers. While many of our customer agreements include provisions which
require customers to reimburse us for excess inventory which we specifically
order to meet their forecasts, we may not actually be reimbursed or be able to
collect on these obligations. In that case, we could have excess inventory
and/or cancellation or return charges from our suppliers.

START-UP COSTS AND INEFFICIENCIES RELATED TO NEW PROGRAMS CAN ADVERSELY AFFECT
OUR OPERATING RESULTS.

Start-up costs, the management of labor and equipment resources in
connection with the establishment of new programs and new customer
relationships, and the need to estimate required resources in advance can
adversely affect our gross margins and operating results. These factors are
particularly evident in the early stages of the life cycle of new products and
new programs. These factors also affect our ability to efficiently use labor and
equipment. In addition, if any of these new programs or new customer
relationships were terminated, our operating results could be harmed,
particularly in the short term.

WE ARE SUBJECT TO EXTENSIVE GOVERNMENT REGULATIONS.

We are also subject to environmental regulations relating to the use,
storage, discharge, recycling and disposal of hazardous chemicals used in our
manufacturing process. If we fail to comply with present and future regulations,
we could be subject to future liabilities or the suspension of business. These
regulations could restrict our ability to expand our facilities or require us to
acquire costly equipment or incur significant expense. While we are not
currently aware of any material violations, we may have to spend funds to comply
with present and future regulations or be required to perform site remediation.

In addition, our medical device business, which represented
approximately 29 percent of our sales for the three months ended December 31,
2001, is subject to substantial government regulation, primarily from the FDA
and similar regulatory bodies in other countries. We must comply with statutes
and regulations covering the design, development, testing, manufacturing and
labeling of medical devices and the reporting of certain information regarding
their safety. Noncompliance with these rules can result in, among other things,
us and our customers being subject to fines, injunctions, civil penalties,
criminal prosecution, recall or seizure of devices, total or partial suspension
of production, failure of the government to grant pre-market clearance or record
approvals for projections or the withdrawal of marketing approvals. The FDA also
has the authority to require repair or replacement of equipment, or refund of
the cost of a device manufactured or distributed by our customers. In addition,
the failure or noncompliance could have an adverse effect on our reputation.

OUR PRODUCTS ARE FOR THE ELECTRONICS INDUSTRY, WHICH PRODUCES TECHNOLOGICALLY
ADVANCED PRODUCTS WITH SHORT LIFE CYCLES.

Factors affecting the electronics industry, in particular the short
life cycle of products, could seriously harm our customers and, as a result, us.
These factors include:

- the inability of our customers to adapt to rapidly changing technology
and evolving industry standards, which result in short product life
cycles
- the inability of our customers to develop and market their products,
some of which are new and untested



21
-   the potential that our customers' products may become obsolete or the
failure of our customers' products to gain widespread commercial
acceptance.

INCREASED COMPETITION MAY RESULT IN DECREASED DEMAND OR PRICES FOR OUR SERVICES.

The electronics manufacturing services industry is highly competitive.
We compete against numerous U.S. and foreign electronics manufacturing services
providers with global operations, as well as those who operate on a local or
regional basis. In addition, current and prospective customers continually
evaluate the merits of manufacturing products internally. Consolidation in the
electronics manufacturing services industry results in a continually changing
competitive landscape. The consolidation trend in the industry also results in
larger and more geographically diverse competitors who have significant combined
resources with which to compete against us.

Some of our competitors have substantially greater managerial,
manufacturing, engineering, technical, financial, systems, sales and marketing
resources than we do. These competitors may:

- respond more quickly to new or emerging technologies
- have greater name recognition, critical mass and geographic and market
presence
- be better able to take advantage of acquisition opportunities
- adapt more quickly to changes in customer requirements
- devote greater resources to the development, promotion and sale of
their services
- be better positioned to compete on price for their services.

We may be operating at a cost disadvantage compared to manufacturers
who have greater direct buying power from component suppliers, distributors and
raw material suppliers or who have lower cost structures. As a result,
competitors may procure a competitive advantage and obtain business from our
customers. Our manufacturing processes are generally not subject to significant
proprietary protection, and companies with greater resources or a greater market
presence may enter our market or increase their competition with us. Increased
competition could result in price reductions, reduced sales and margins or loss
of market share.

WE MAY FAIL TO SECURE NECESSARY ADDITIONAL FINANCING.

We have made and intend to continue to make substantial capital
expenditures to expand our operations, acquire businesses and remain competitive
in the rapidly changing electronics manufacturing services industry. Our future
success may depend on our ability to obtain additional financing and capital to
support our continued growth and operations, including our working capital
needs. We may seek to raise capital by:

- issuing additional common stock or other equity securities
- issuing debt securities
- increasing available borrowings under our existing credit facility or
obtaining new credit facilities o obtaining further off-balance-sheet
financing.

We may not be able to obtain additional capital when we want or need
it, and capital may not be available on satisfactory terms. If we issue
additional equity securities or convertible debt to raise capital, it may be
dilutive to your ownership interest. Furthermore, any additional financing and
capital may have terms and conditions that adversely affect our business, such
as restrictive financial or operating covenants.

WE DEPEND ON CERTAIN KEY PERSONNEL, AND THE LOSS OF KEY PERSONNEL MAY HARM OUR
BUSINESS.

Our future success depends in large part on the continued service of
our key technical and management personnel, and on our ability to continue to
attract and retain qualified employees, particularly those highly skilled
design, process and test engineers involved in the development of new products
and processes and the manufacture of existing products. The competition for
these individuals is intense, and the loss of key employees, generally none of
whom is subject to an employment agreement for a specified term or a
post-employment non-competition agreement, could harm our business. We believe
that we have a relatively small management group whose resources could be
strained as a result of expansion of our business.


22
PRODUCTS WE MANUFACTURE MAY CONTAIN DESIGN OR MANUFACTURING DEFECTS WHICH COULD
RESULT IN REDUCED DEMAND FOR OUR SERVICES AND LIABILITY CLAIMS AGAINST US.

We manufacture products to our customers' specifications which are
highly complex and may at times contain design or manufacturing errors or
failures. Defects have been discovered in products we manufactured in the past
and, despite our quality control and quality assurance efforts, defects may
occur in the future. Defects in the products we manufacture, whether caused by a
design, manufacturing or component failure or error, may result in delayed
shipments to customers or reduced or cancelled customer orders. If these defects
occur in large quantities or too frequently, our business reputation may also be
impaired. In addition, these defects may result in liability claims against us.
The FDA investigates and checks, occasionally on a random basis, compliance with
statutory and regulatory requirements. Violations may lead to penalties or
shutdowns of a program or a facility.

THE PRICE OF OUR COMMON STOCK HAS BEEN AND MAY CONTINUE TO BE VOLATILE.

Our stock price has fluctuated significantly. The price of our common
stock may fluctuate significantly in response to a number of events and factors
relating to our company, our competitors and the market for our services, many
of which are beyond our control.

In addition, the stock market in general, and especially the NASDAQ
National Market along with market prices for technology companies, in
particular, have experienced extreme volatility that has often been unrelated to
the operating performance of these companies. These broad market and industry
fluctuations may adversely affect the market price of our common stock,
regardless of our operating results.

Among other things, volatility in Plexus' stock price could mean that
investors will not be able to sell their shares at or above the prices which
they pay. The volatility also could impair Plexus' ability in the future to
offer common stock as a source of additional capital and/or as consideration in
the acquisition of other businesses.

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are exposed to market risk from changes in foreign exchange and
interest rates. To reduce such risks, we selectively use financial instruments.

FOREIGN CURRENCY RISK

We do not use derivative financial instruments for speculative
purposes. Our policy is to selectively hedge certain foreign currency
denominated transactions in a manner that substantially offsets the effects of
changes in foreign currency exchange rates. Presently, we use foreign currency
forward contracts to hedge only those currency exposures associated with certain
assets and liabilities denominated in non-functional currencies. Corresponding
gains and losses on the underlying transaction generally offset the gains and
losses on these foreign currency hedges. Expansion into additional international
markets (Malaysia and China) may increase the complexity and size of our foreign
currency exchange risk. As of December 31, 2001, the foreign currency forward
contracts were scheduled to mature in less than three months and were not
material.

INTEREST RATE RISK

We have financial instruments, including cash equivalents, short-term
investments, long-term debt and our asset securitization facility, which are
sensitive to changes in interest rates. We consider the use of interest-rate
swaps based on existing market conditions. We currently do not use any
interest-rate swaps or other types of derivative financial instruments.

The primary objective of our investment activities is to preserve
principal, while maximizing yields without significantly increasing market risk.
To achieve this, we maintain our portfolio of cash equivalents and short-term
investments in a variety of securities such as money market funds and
certificates of deposit and limit the amount of principal exposure to any one
issuer.

Our only material interest rate risk is associated with our credit
facilities and asset securitization facility. Interest on borrowings is computed
at the applicable Eurocurrency rate on the agreed currency. A 10 percent change
in our weighted average interest rate on average borrowings would have impacted
net interest expense by approximately $0.1 million and $0.2 million for the
three months ended December 31, 2001 and 2000, respectively.




23
PART II - OTHER INFORMATION

ITEM 6. EXHIBITS AND REPORTS ON FORM 8-K


(a) Exhibits

10.1 Payment and Securities Agreement dated as of January
3, 2002 by and among Plexus, Plexus Services Corp.
and MemoryLink Corp.

(b) Reports on Form 8-K during this period.

No reports on Form 8-K were filed during the period.
Subsequently, however, a report dated January 8, 2002
was filed by Plexus to report its acquisition of
certain assets of MCMS, Inc.


SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the
registrant had duly caused this report to be signed on its behalf by the
undersigned thereunto duly authorized.

2/13/02 /s/ John L. Nussbaum
- ---------- --------------------------------------------
Date John L. Nussbaum
President and Chief Executive Officer


2/13/02 /s/ Thomas B. Sabol
- ---------- --------------------------------------------
Date Thomas B. Sabol
Executive Vice President and
Chief Financial Officer















24