1 SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549 FORM 10-K (MARK ONE) X ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES - --- EXCHANGE ACT OF 1934 FOR THE FISCAL YEAR ENDED DECEMBER 31, 2000 OR TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES - --- EXCHANGE ACT OF 1934 [NO FEE REQUIRED] FOR THE TRANSITION PERIOD FROM ____________ TO ___________ COMMISSION FILE NUMBER 0-4776 STURM, RUGER & COMPANY, INC. (Exact name of registrant as specified in its charter) <TABLE> <S> <C> DELAWARE 06-0633559 (State or other jurisdiction of (I.R.S. Employer incorporation or organization) Identification No.) LACEY PLACE, SOUTHPORT, CONNECTICUT 06490 (Address of principal executive offices) (Zip Code) </TABLE> (203) 259-7843 (Registrant's telephone number, including area code) Securities registered pursuant to Section 12(b) of the Act: <TABLE> <S> <C> Title of each class Name of each exchange on which registered COMMON STOCK, $1 PAR VALUE NEW YORK STOCK EXCHANGE </TABLE> Securities registered pursuant to Section 12(g) of the Act: None (Title of Class) Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. YES X NO --- --- Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K [X]. The aggregate market value of the voting stock held by nonaffiliates of the registrant as of March 1, 2001: Common Stock, $1 par value - $192,026,961 The number of shares outstanding of the issuer's common stock as of March 15, 2001: Common Stock, $1 par value - 26,910,720 DOCUMENTS INCORPORATED BY REFERENCE Portions of the Annual Report to Stockholders for the fiscal year ended December 31, 2000 are incorporated by reference into Parts I, II and IV of this Report. Portions of the Proxy Statement relating to the Annual Meeting of Stockholders to be held May 3, 2001 are incorporated by reference into Part III of this Report. Page 1 of 51
2 PART I ITEM 1 -- BUSINESS The Company is principally engaged in the design, manufacture, and sale of firearms and precision metal investment castings. The Company is the only U.S. firearms manufacturer which offers products in all four industry categories (rifles, shotguns, pistols, and revolvers) and believes that it is the largest U.S. firearms manufacturer, based on data reported in the Bureau of Alcohol, Tobacco and Firearms' 1998 Annual Firearms Manufacturing and Exportation Report ("BATF Data"). The Company, which has been profitable every year since 1950, believes it has a preeminent reputation among sportsmen, hunters, and gun collectors for technical innovation and quality construction, based on reports in industry and business publications. The Company has been in business since 1949 and was incorporated in its present form under the laws of Delaware in 1969. The Company's firearms, which are sold under the "Ruger" name and trademark, consist of single-shot, autoloading, bolt-action, lever action, and muzzleloading rifles in a broad range of hunting calibers; shotguns in three gauges; .22 caliber rimfire autoloading pistols and centerfire autoloading pistols in various calibers; and single-action, double-action, and muzzleloading revolvers in various calibers. The Company manufactures a wide range of high quality products and does not manufacture inexpensive concealable firearms, sometimes known as "Saturday Night Specials," "Junk Guns," or any firearm included on the list of "assault weapons" which was part of anti-crime legislation enacted by Congress in 1994. Many of the firearms introduced by the Company over the years have become "classics" which have retained their popularity for decades and are sought by collectors. These firearms include the single-action Single-Six, Blackhawk, and Bearcat revolvers, the double-action Redhawk revolvers, the 10/22 and Mini-14 autoloading, M-77 bolt-action, and Number One Single-Shot rifles, and the Red Label over-and-under shotguns. The Company has supplemented these "classics" with the introduction of new models and variations of existing models, including a line of centerfire autoloading pistols introduced in 1987, three lines of double action revolvers, the SP101, GP100, and Super Redhawk models as well as a line of muzzleloading rifles introduced in 1997. The Company also introduced a line of lever action rifles in 1997. The Company's ongoing commitment to the development and introduction of new models of firearms in appropriate product categories continues to generate new offerings. In 2001, we will introduce several novel offerings including the Ruger Super Redhawk chambered in the new .480 Ruger caliber, the first caliber to bear the Ruger headstamp; the Ruger Compact M77 Mark II, which is approximately eighty percent of the size of our standard-length bolt action hunting rifle; and the KP95 with a manual safety, which adds to our line of "decock only" and "double action only" models. The Company is also engaged in the manufacture of titanium and ferrous investment castings for a wide variety of markets including sporting goods, commercial, and military. In 1999 and 1998, the Company's foremost investment castings product was titanium golf club heads for Callaway Golf Company, Inc. ("Callaway Golf"). Historically, the Company had obtained purchase orders from Callaway Golf that covered periods in excess of one year. However, a long-term contract with Callaway Golf was substantially completed during the fourth quarter of 1999. Shipments to Callaway Golf in 2000 were minimal. As a result, the current level of titanium golf club head shipments is expected to continue for the foreseeable future. One customer, a boat and engine manufacturer that represented approximately 12% of casting segment sales in 2000, filed for bankruptcy during the fourth quarter 2000. As such, the level of future sales to this customer or its successor is uncertain. The Company produces titanium golf club heads for Karsten Manufacturing Corporation ("Ping") and other golf club manufacturers, as well as various titanium and steel castings for a number of customers. For 2000 and beyond, the Company will continue to pursue other titanium and steel castings markets, as well as other golf club casting business. 2
3 ITEM 1 -- BUSINESS (CONTINUED) For the years ended December 31, 2000, 1999, and 1998, net sales attributable to the Company's firearms operations were approximately 82%, 78%, and 68%, respectively, of total net sales. The balance of the Company's net sales for the aforementioned periods was attributable to its investment castings operations. Further information regarding industry segment data is incorporated by reference to page 20 of the Company's 2000 Annual Report to Stockholders. PRODUCTS -- FIREARMS The Company presently manufactures 30 different types of firearm products in four industry categories: rifles, shotguns, pistols, and revolvers. Most are available in several models based upon caliber, finish, barrel length, and other features. RIFLES -- A rifle is a long gun with spiral grooves cut into the interior of the barrel to give the bullet a stabilizing spin after it leaves the barrel. The Company presently manufactures twelve different types of rifles: the M77 Mark II, the M77 Mark II Express and Magnum, the 77/22, the 77/44, the 10/22, the Model 96, the Mini-14, the Mini Thirty, the Ruger Carbine, the Deerfield Carbine (99/44), the No. 1 Single-Shot, and the 77/50 Muzzle Loader. Sales of rifles by the Company accounted for approximately $73.2 million, $89.8 million, and $71.6 million of revenues for the years 2000, 1999, and 1998, respectively. SHOTGUNS -- A shotgun is a long gun with a smooth barrel interior which fires lead or steel pellets. The Company presently manufactures three different types of over-and-under shotguns: the Red Label available in 12, 20, and 28 gauge, the Woodside available in 12 gauge, and the Trap Model available in 12 gauge. Most of the Red Label models are available in special Sporting Clays, English Field, All-Weather and engraved versions. Sales of shotguns by the Company accounted for approximately $11.4 million, $13.4 million, and $10.4 million of revenues for the years 2000, 1999, and 1998, respectively. PISTOLS -- A pistol is a handgun in which the ammunition chamber is an integral part of the barrel and which is fed ammunition from a magazine contained in the grip. The Company presently manufactures three different types of pistols, the Ruger Mark II .22 caliber in Standard, Competition, and Target models, the Ruger 22/45, and the P-Series centerfire autoloading pistols in various calibers, configurations, and finishes. Sales of pistols by the Company accounted for approximately $43.2 million, $47.3 million, and $33.5 million of revenues for the years 2000, 1999, and 1998, respectively. REVOLVERS -- A revolver is a handgun which has a cylinder that holds the ammunition in a series of chambers which are successively aligned with the barrel of the gun during each firing cycle. There are two general types of revolvers, single-action and double-action. To fire a single-action revolver, the hammer is pulled back to cock the gun and align the cylinder before the trigger is pulled. To fire a double-action revolver, a single trigger pull advances the cylinder and cocks and releases the hammer. The Company presently manufactures eight different types of single-action revolvers: the New Model Super Single-Six, the New Model .32 Magnum Super Single-Six, the New Model Blackhawk, the New Model Super Blackhawk, the Vaquero, the Ruger Bisley, the Old Army Cap & Ball, and the New Bearcat. The Company presently manufactures four different types of double-action revolvers: the SP101, the GP100, the Redhawk, and the Super Redhawk. Sales of revolvers by the Company accounted for approximately $34.0 million, $33.7 million, and $26.0 million of revenues for the years 2000, 1999, and 1998, respectively. The Company also manufactures and sells accessories and replacement parts for its firearms. These sales accounted for approximately $4.6 million, $4.4 million, and $3.4 million of revenues for the years 2000, 1999, and 1998, respectively. 3
4 ITEM 1 -- BUSINESS (CONTINUED) PRODUCTS -- INVESTMENT CASTINGS The investment castings products currently manufactured by the Company consist of titanium, chrome-molybdenum, stainless steel, nickel, and cobalt alloys. Sales of golf club heads to Callaway Golf approximated 58% and 63% of casting revenues for 1999 and 1998, respectively. The remaining revenue represents parts sold to unrelated third parties for a wide variety of industries including sporting goods, commercial, and military. In 2000, shipments to Callaway Golf were minimal. Ruger Investment Casting ("RIC"), which includes the Antelope Hills foundry, is located in Prescott, Arizona and engineers and produces titanium and ferrous castings. The Pine Tree Castings Division of the Company, located in Newport, New Hampshire, engineers and produces ferrous castings for a wide range of commercial customers. The Company sold the assets of its Uni-Cast Division, which was located in Manchester, New Hampshire, on June 2, 2000. Uni-Cast's activity was immaterial for the three years ended December 31, 2000. Sales from the Company's investment casting operations (excluding intercompany transactions) accounted for approximately $36.2 million, $53.1 million, and $66.7 million, or 18%, 22%, and 32% of the Company's total net sales for 2000, 1999, and 1998, respectively. MANUFACTURING FIREARMS -- The Company produces most rifles, and all shotguns and revolvers at the Newport, New Hampshire facility. Some rifles and all pistols are produced at the Prescott, Arizona facility. Many of the basic metal component parts of the firearms manufactured by the Company are produced by the Company's castings facilities through a process known as precision investment casting. See "Manufacturing-Investment Castings" for a description of the investment casting process. The Company initiated the use of this process in the production of component parts for firearms in 1953 and believes that its widespread use of investment castings in the firearms manufacturing process is unique among firearms manufacturers. The investment casting process provides greater design flexibility and results in component parts which are generally close to their ultimate shape and, therefore, require less machining. Through the use of investment castings, the Company is able to produce durable and less costly component parts for its firearms. Third parties supply the Company with various raw materials for its firearms, such as fabricated steel components, walnut, birch, beech, maple and laminated lumber for rifle and shotgun stocks, various synthetic products and other component parts. These raw materials and component parts are readily available from multiple sources at competitive prices. One component part, an aluminum casting used in the manufacture of certain models of pistols, is purchased from only one third party may not be readily available from other sources immediately. All assembly, inspection, and testing of firearms manufactured by the Company is performed at the Company's manufacturing facilities. Every firearm, including every chamber of every revolver manufactured by the Company, is test-fired prior to shipment. 4
5 ITEM 1 -- BUSINESS (CONTINUED) INVESTMENT CASTINGS -- The Company manufactures all of its precision investment castings products at one of its three investment casting foundries. To produce a product by the investment casting method, a wax model of the part is created and coated ("invested") with several layers of ceramic material. The shell is then heated to melt the interior wax which is poured off, leaving a hollow mold. To cast the desired part, molten metal is poured into the mold and allowed to cool and solidify. The mold is then broken off to reveal a near net shape cast metal part. All of the titanium investment castings and some of the ferrous investment castings products are manufactured by the Company's RIC Division. This facility is one of the largest investment castings facilities in the Southwest. The Company's Pine Tree Castings Division manufactures ferrous investment castings. Raw materials including wax, ceramic material, and metal alloys necessary for the production of investment cast products are supplied to the Company through third parties. The Company believes that these raw materials are readily available from multiple sources at competitive prices. MARKETING AND DISTRIBUTION FIREARMS -- The Company's firearms are primarily marketed through a network of selected independent wholesale distributors who purchase the products directly from the Company for resale to Federally-licensed retail gun dealers and legally authorized end-users. These end-users include sportsmen, hunters, law enforcement and other governmental organizations, and gun collectors. Each of these distributors carries the entire line of firearms manufactured by the Company for the commercial market. Currently, 23 distributors service the domestic commercial market, with an additional 17 servicing the domestic law enforcement market and two servicing the Canadian market. Four of these distributors service both the domestic commercial market and the domestic law enforcement market. Jerry's Sport Center, accounted for approximately 12%, 14%, and 15% of the Company's net sales of firearms and 10%, 11%, and 10% of consolidated net sales in 2000, 1999, and 1998, respectively. AcuSport Corporation accounted for approximately 20%, 19%, and 17% of net firearms sales and 16%, 15%, and 12% of consolidated net sales in 2000, 1999, and 1998, respectively. Davidson's Supply Company, accounted for approximately 14% and 13% of net firearms sales and 11% and 10% of consolidated net sales in 2000 and 1999, respectively. The Company employs six employees and two independent contractors who service these distributors and call on dealers and law enforcement agencies. Because the ultimate demand for the Company's firearms comes from end-users, rather than from the Company's distributors, the Company believes that the loss of any distributor would not have a material adverse effect on the Company, but may have a material impact on the Company's financial results for a particular period. The Company considers its relationships with its distributors to be satisfactory. In addition, the Company markets its firearms directly to foreign customers, consisting primarily of law enforcement agencies and foreign governments. Foreign sales were less than 10% of the Company's consolidated net sales for each of the past three years. No material portion of the Company's business is subject to renegotiation of profits or termination of contracts at the election of a government purchaser. In the fourth quarter of 2000, the Company received annual orders from its distributors for the 2001 marketing year. As of March 1, 2001, unfilled firearms orders were approximately $113 million as compared to approximately $135 million at March 1, 2000. Most of the firearms manufactured by the Company are sold on terms requiring payment in full within 30 days. However, certain products which are generally used during the fall hunting season are sold pursuant to a "dating plan" which, in general, allows the purchasing distributor to buy the products 5
6 ITEM 1 -- BUSINESS (CONTINUED) commencing in December, the normal start of the Company's dating plan year, and pay for them on extended terms. Discounts are offered for early payment. Management believes that this dating plan serves to level out the demand for these seasonal products throughout the entire year and facilitates an efficient manufacturing schedule. The Company does not consider its overall firearms business to be significantly seasonal; however sales of certain models of firearms are usually lower in the third quarter of the year. INVESTMENT CASTINGS -- The investment casting segment's principal markets are sporting goods, commercial, and military. Sales are made directly to customers or through manufacturers' representatives. In 1999 and 1998 one castings segment customer, Callaway Golf, accounted for approximately 13% and 20% of consolidated net sales and 58% and 63% of casting segment sales, respectively. Historically, the Company had obtained purchase orders from Callaway Golf that covered periods in excess of one year. However, a long-term contract with Callaway Golf was substantially completed during the fourth quarter of 1999. Shipments to Callaway Golf in 2000 were minimal. As a result, the current level of golf club head shipments is expected to continue for the foreseeable future. In 1998, the Company began production of titanium golf club heads for Karsten Manufacturing Corporation ("Ping") and other golf club manufacturers, as well as beginning production of a line of titanium hand tools for a number of customers. For 2000 and beyond, the Company will continue to pursue other titanium and steel castings markets, as well as other golf club casting business. COMPETITION FIREARMS -- Competition in the firearms industry is intense and comes from both foreign and domestic manufacturers. While some of these competitors concentrate on a single industry product category, such as rifles or pistols, several foreign competitors manufacture products in all four industry categories (rifles, shotguns, pistols, and revolvers). Some of these competitors are subsidiaries of large corporations with substantially greater financial resources than the Company. The Company is the only domestic manufacturer which produces firearms in all four industry product categories and believes that it is the largest U.S. firearms manufacturer, according to BATF Data. The principal methods of competition in the industry are product quality and price. The Company believes that it can compete effectively with all of its present competitors based upon the high quality, reliability and performance of its products, and the competitiveness of its pricing. INVESTMENT CASTINGS -- There are a large number of investment castings manufacturers, both domestic and foreign, with which the Company competes. Competition varies based on the type of investment castings products (titanium or steel) and the end use of the product (sporting goods, commercial, or military). Many of these competitors are larger than the Company and may have greater resources. The principal methods of competition in the industry are quality, production lead time, and price. The Company believes that it can compete effectively with all of its present competitors and has expended significant amounts of resources on both expanding and modernizing its investment casting facilities during the last several years. EMPLOYEES As of March 1, 2001, the Company employed 1,778 full-time employees of which approximately 38% had at least ten years of service with the Company. None of the Company's employees are subject to a collective bargaining agreement. The Company has never experienced a strike during its entire 51-year history and believes its employee relations are satisfactory. 6
7 ITEM 1 -- BUSINESS (CONTINUED) RESEARCH AND DEVELOPMENT In 2000, 1999, and 1998, the Company spent approximately $1.0 million, $1.2 million, and $1.1 million, respectively, on research activities relating to the development of new products and the improvement of existing products. As of February 28, 2001, the Company had approximately 42 employees engaged in research and development activities as part of their responsibilities. PATENTS AND TRADEMARKS The Company owns various United States and foreign patents and trademarks which have been secured over a period of years and which expire at various times. It is the policy of the Company to apply for patents and trademarks whenever new products or processes deemed commercially valuable are developed or marketed by the Company. However, none of these patents and trademarks are considered to be basic to any important product or manufacturing process of the Company and, although the Company deems its patents and trademarks to be of value, it does not consider its business materially dependent on patent or trademark protection. ENVIRONMENTAL MATTERS The Company has programs in place that monitor compliance with various environmental regulations. However, in the normal course of its manufacturing operations the Company is subject to occasional governmental proceedings and orders pertaining to waste disposal, air emissions, and water discharges into the environment. The Company believes that it is generally in compliance with applicable environmental regulations and the outcome of such proceedings and orders will not have a material effect on its business. EXECUTIVE OFFICERS OF THE COMPANY Set forth below are the names, ages, and positions of the executive officers of the Company. Officers serve at the pleasure of the Board of Directors of the Company. <TABLE> <CAPTION> Name Age Position With Company ---- --- --------------------- <S> <C> <C> William B. Ruger 84 Chairman Emeritus and Director William B. Ruger, Jr. 61 Chairman of the Board, Chief Executive Officer and Director Erle G. Blanchard 54 Vice Chairman, President, Chief Operating Officer, Treasurer and Director Stephen L. Sanetti 51 Vice Chairman, Senior Executive Vice President, General Counsel and Director Leslie M. Gasper 47 Corporate Secretary </TABLE> William B. Ruger was named Chairman Emeritus on October 24, 2000. Prior to that he had served as Chairman of the Board, Chief Executive Officer, and Treasurer of the Company since 1949. He is the father of William B. Ruger, Jr. William B. Ruger, Jr. became Chairman of the Board and Chief Executive Officer on October 24, 2000. Mr. Ruger had served as President and Chief Operating Officer since March 1, 1998, Vice Chairman and Senior Executive Officer of the Company since 1995 and Director of the Company since 1970. Previously, he served as President of the Company from 1991 to 1995 and as Senior Vice President of the Company from 1970 to 1990. 7
8 ITEM 1 -- BUSINESS (CONTINUED) Erle G. Blanchard was elected Vice Chairman, President, Chief Operating Officer, Treasurer and Director on October 24, 2000. Mr. Blanchard had returned to the Company as Vice President, Controller in March 1996. From March 1995 to March 1996, he was not employed by the Company. Prior to this, he served as Plant Manager of the Newport Firearms Manufacturing facility since 1986 and became Vice President, Controller - Newport in 1993. Stephen L. Sanetti became Vice Chairman, Senior Executive Vice President and General Counsel on October 24, 2000. Mr. Sanetti has been a Director since March 1, 1998. Prior to October 24, 2000, he had been Vice President, General Counsel of the Company since 1993 and has served as General Counsel since 1980. Leslie M. Gasper has been Secretary of the Company since 1994. Prior to this, she was the Administrator of the Company's pension plans, a position she held for more than five years prior thereto. ITEM 2 -- PROPERTIES The Company's manufacturing operations are carried out at three facilities. The following table sets forth certain information regarding each of these facilities: <TABLE> <CAPTION> Approximate Aggregate Usable Square Feet Status ----------- ------ <S> <C> <C> Newport, New Hampshire 350,000 Owned Prescott, Arizona 230,000 Leased Prescott, Arizona 110,000 Owned </TABLE> The Newport and one of the Prescott facilities each contain enclosed ranges for testing firearms and also contain modern tool room facilities. The lease of the Prescott facility provides for rental payments which approximate real property taxes. The Company's headquarters and related operations are in Southport, Connecticut. There are no mortgages on any of the real estate owned by the Company. ITEM 3 -- LEGAL PROCEEDINGS As of December 31, 2000 the Company is a defendant in approximately 42 lawsuits involving its products and is aware of certain other such claims. These lawsuits and claims fall within two categories: (i) those that claim damages from the Company related to allegedly defective product design which stem from a specific incident. These lawsuits and claims are based principally on the theory of "strict liability" but also may be based on negligence, breach of warranty, and other legal theories, and (ii) those brought by cities, municipalities, counties, individuals (including certain putative class actions) and one state Attorney General against numerous firearms manufacturers, distributors and dealers seeking to recover damages allegedly arising out of the misuse of firearms by third 8
9 ITEM 3 -- LEGAL PROCEEDINGS (CONTINUED) parties in the commission of homicides, suicides and other shootings involving juveniles and adults. The complaints by municipalities seek damages, among other things, for the costs of medical care, police and emergency services, public health services, and the maintenance of courts, prisons, and other services. In certain instances, the plaintiffs seek to recover for decreases in property values and loss of business within the city due to criminal violence. In addition, nuisance abatement and/or injunctive relief is sought to change the design, manufacture, marketing and distribution practices of the various defendants. These suits allege, among other claims, strict liability or negligence in the design of products, public nuisance, negligent entrustment, negligent distribution, deceptive or fraudulent advertising, violation of consumer protection statutes and conspiracy or concert of action theories. None of these cases allege a specific injury to a specific individual as a result of the misuse or use of any of the Company's products. In the opinion of management, after consultation with special and corporate counsel, it is not probable and is unlikely that litigation, including punitive damage claims, will have a material adverse effect on the financial position of the Company, but may have a material impact on the Company's financial results for a particular period. Punitive damages, as well as compensatory damages, are demanded in many of the lawsuits and claims. Aggregate claimed amounts presently exceed product liability accruals and applicable insurance coverage. As of March 18, 1982, compensatory and punitive damage insurance coverage is provided, in States where permitted, for losses exceeding $1.0 million of loss per occurrence or an aggregate maximum loss of $4.0 million. For claims which the Company has been notified in writing between July 10, 1988, through July 10, 1989, coverage is provided for losses exceeding $2.5 million per claim or an aggregate maximum loss of $9.0 million. For claims made between July 10, 1989, and July 10, 1991, the aggregate maximum loss is $7.5 million. For claims made after July 10, 1992, coverage is provided for losses exceeding $2.25 million per claim, or an aggregate maximum loss of $6.5 million. For claims made after July 10, 1994, coverage is provided for losses exceeding $2.0 million per claim, or an aggregate maximum loss of $6.0 million. For claims made after July 10, 1997, coverage is provided for annual losses exceeding $2.0 million per claim, or an aggregate maximum loss of $5.5 million annually. For claims made after July 10, 2000, coverage is provided for annual losses exceeding $5 million per claim, or an aggregate maximum loss of $10 million annually, except for certain new claims which might be brought by governments or municipalities after July 10, 2000, which are excluded from coverage. The Company has reported all cases instituted against it through September 30, 2000, and the results of those cases, where terminated, to the S.E.C. on its previous Form 10-K and 10-Q reports, to which reference is hereby made. For a description of all pending lawsuits against the Company through September 30, 2000, reference is made to the discussion under the caption "Item 3. LEGAL PROCEEDINGS" of the Company's Annual Reports on Form 10-K for the years ended December 31, 1995 and 1998, and to the discussion under caption "Item 1. LEGAL PROCEEDINGS" of the Company's Quarterly Reports on Form 10-Q for the quarters ended March 31, 1987, September 30, 1990, March 31, 1995, March 31 and June 30, 1996, September 30, 1997, September 30, 1998 and March 31, June 30, and September 30, 1999. 9
10 ITEM 3 -- LEGAL PROCEEDINGS (CONTINUED) The following cases were instituted against the Company during the three months ended December 31, 2000, which involved significant demands for compensatory and/or punitive damages: Shane Bieber v. Company (MT) in the District Court of the Eleventh Judicial District of the State of Montana. The Company learned of this incident on July 15, 1996, but was not served until October 24, 2000. The present complaint alleges that the plaintiff's Ruger revolver accidentally discharged when it fell onto the floor from a pile of clothes he had placed it on, resulting in injury to his right leg. Plaintiff seeks compensatory and punitive damages to be determined by the Court. Patrick M. Mahoney, et. al. v. Beretta USA Corp., et. al. (DC) in the Superior Court for the District of Columbia. The Company learned of this complaint on July 24, 2000, but was not served until November 6, 2000. The complaint alleges that plaintiff's daughter was fatally injured by a criminal using a firearm of unknown manufacture during an attempted robbery. Plaintiffs seek general, special, compensatory and punitive damages to be determined by the Court. During the three months ending December 31, 2000, two previously-reported cases were settled: <TABLE> <CAPTION> Case Name Jurisdiction --------- ------------ <S> <C> LeBlanc Texas Schuett Alaska </TABLE> The settlement amounts were within the Company's limits of its self-insurance coverage. In the previously-reported case of Keene v. Company, (TX), the Company's Motion for Summary Judgment was granted in favor of the Company on November 7, 2000. No appeal was filed by the plaintiff. On December 5, 2000, the previously-reported case of Camden County v. Company, et. al. (NJ) was dismissed in its entirety. This was the first Federal Court dismissal of a municipal lawsuit. Plaintiffs will most likely appeal. On December 15, 2000, the previously-reported Anderson v. Company, et. al. case, the Company was voluntarily dismissed by the plaintiff. On December 20, 2000, in the previously-reported Federal Court City of Philadelphia v. Company, et. al. case, the Company's Motion for Summary Judgment was granted. It is uncertain whether plaintiffs will appeal. ITEM 4 -- SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS None. 10
11 PART II ITEM 5 -- MARKET FOR REGISTRANT'S COMMON STOCK AND RELATED STOCKHOLDER MATTERS The information required for this Item is incorporated by reference from pages 5 and 23 of the Company's 2000 Annual Report to Stockholders. ITEM 6 -- SELECTED FINANCIAL DATA The information required for this Item is incorporated by reference from page 5 of the Company's 2000 Annual Report to Stockholders. ITEM 7 -- MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS The information required for this Item is incorporated by reference from pages 6 through 9 of the Company's 2000 Annual Report to Stockholders. ITEM 7A -- QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK The Company is exposed to changes in prevailing market interest rates affecting the return on its investments but does not consider this interest rate market risk exposure to be material to its financial condition or results of operations. The Company invests primarily in United States Treasury instruments with short-term (less than one year) maturities. The carrying amount of these investments approximates fair value due to the short-term maturities. Under its current policies, the Company does not use derivative financial instruments, derivative commodity instruments or other financial instruments to manage its exposure to changes in interest rates or commodity prices. ITEM 8 -- FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA (A) FINANCIAL STATEMENTS The consolidated balance sheets of Sturm, Ruger & Company, Inc. and Subsidiaries as of December 31, 2000 and 1999, and the related consolidated statements of income, stockholders' equity and cash flows for each of the three years in the period ended December 31, 2000 and the report dated February 9, 2001 of Ernst & Young LLP, independent auditors, are incorporated by reference from pages 12 through 22 of the Company's 2000 Annual Report to Stockholders. (B) SUPPLEMENTARY DATA Quarterly results of operations for 2000 and 1999 are incorporated by reference from page 21 of the Company's 2000 Annual Report to Stockholders. ITEM 9 -- CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE None. 11
12 PART III ITEM 10 -- DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT The information as to the directors of the Company under the caption "ELECTION OF DIRECTORS" on pages 2 through 4 of the Company's Proxy Statement relating to the Annual Meeting of Stockholders to be held May 3, 2001 is incorporated by reference into this Report. The information set forth under the caption "SECTION 16(a) BENEFICIAL OWNERSHIP REPORTING COMPLIANCE" on page 21 of the Proxy Statement relating to the Annual Meeting of Stockholders to be held May 3, 2001 is incorporated by reference into this Report. The information as to executive officers of the Company is included in Part I hereof under the caption "Executive Officers of the Company" in reliance upon General Instruction G to Form 10-K and Instruction 3 to Item 401(b) of Regulation S-K. ITEM 11 -- EXECUTIVE COMPENSATION The information required by this Item is incorporated by reference from those sections of the Company's Proxy Statement relating to the Annual Meeting of Stockholders to be held May 3, 2001 under the captions "DIRECTOR COMPENSATION AND INFORMATION ABOUT THE BOARD OF DIRECTORS AND ITS COMMITTEES," "EXECUTIVE COMPENSATION," "COMPENSATION COMMITTEE REPORT ON EXECUTIVE COMPENSATION, "COMPENSATION COMMITTEE INTERLOCKS AND INSIDER PARTICIPATION," "2000 OPTION GRANTS," "AGGREGATED OPTION/SAR EXERCISES IN LAST FISCAL YEAR AND FISCAL YEAR-END OPTION/SAR VALUES," "2001 STOCK OPTION PLAN FOR NON-EMPLOYEE DIRECTORS," "COMPANY STOCK PRICE PERFORMANCE," "PENSION PLAN TABLE," and "SUPPLEMENTAL EXECUTIVE RETIREMENT PLAN TABLE" on pages 5 through 18. ITEM 12 -- SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT The information required by this Item is incorporated by reference from those sections of the Company's Proxy Statement relating to the Annual Meeting of Stockholders to be held May 3, 2001 under the captions "ELECTION OF DIRECTORS," "PRINCIPAL STOCKHOLDERS," and "SECURITY OWNERSHIP OF MANAGEMENT" on pages 2 through 4, 19, 20. ITEM 13 -- CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS The information required by this Item is incorporated by reference from those sections of the Company's Proxy Statement relating to the Annual Meeting of Stockholders to be held May 3, 2001 under the captions "DIRECTOR COMPENSATION AND INFORMATION ABOUT THE BOARD OF DIRECTORS AND ITS COMMITTEES," "EXECUTIVE COMPENSATION," "2000 OPTION GRANTS," AGGREGATED OPTION/SAR EXERCISES IN LAST FISCAL YEAR AND FISCAL YEAR-END OPTION/SAR VALUES," "2001 STOCK OPTION PLAN FOR NON-EMPLOYEE DIRECTORS," and "CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS" on pages 5 through 7, 10 through 14, and 21. 12
13 PART IV ITEM 14 -- EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K (a) Documents filed as part of this Form 10-K. (1) Financial Statements: Consolidated Balance Sheets -- December 31, 2000 and 1999 Consolidated Statements of Income -- Years ended December 31, 2000, 1999, and 1998 Consolidated Statements of Stockholders' Equity -- Years ended December 31, 2000, 1999, and 1998 Consolidated Statements of Cash Flows -- Years ended December 31, 2000, 1999, and 1998 Notes to Consolidated Financial Statements Report of Independent Auditors This information is incorporated by reference from the Company's 2000 Annual Report to Stockholders as noted in Item 8. (2) Financial Statement Schedules: Schedule II-Valuation and Qualifying Accounts All other schedules for which provision is made in the applicable accounting regulation of the Securities and Exchange Commission are not required under the related instructions, or are inapplicable, or the required information is disclosed elsewhere, and therefore, have been omitted. (3) Listing of Exhibits: <TABLE> <S> <C> Exhibit 3.1 Certificate of Incorporation of the Company, as amended (Incorporated by reference to Exhibits 4.1 and 4.2 to the Form S-3 Registration Statement previously filed by the Company File No. 33-62702). Exhibit 3.2 Bylaws of the Company, as amended (Incorporated by reference to Exhibit 3.2 to the Company's Annual Report on Form 10-K for the year ended December 31, 1995, SEC File No. 0-4776). Exhibit 3.3 Amendment to Article 2, Sections 4 and 5 of the Bylaws of the Company (Incorporated by reference to Exhibit 3.3 to the Company's Annual Report on Form 10-K for the year ended December 31, 1996, SEC File No. 0-4776). </TABLE> 13
14 ITEM 14 -- EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K (CONTINUED) <TABLE> <S> <C> Exhibit 10.1 Sturm, Ruger & Company, Inc. 1986 Stock Bonus Plan (Incorporated by reference to Exhibit 10.1 to the Company's Annual Report on Form 10-K for the year ended December 31, 1988, as amended by Form 8 filed March 27, 1990, SEC File No. 0-4776). Exhibit 10.2 Amendment to Sturm, Ruger & Company, Inc. 1986 Stock Bonus Plan (Incorporated by reference to Exhibit 10.3 to the Company's Annual Report on Form 10-K for the year ended December 31, 1991, SEC File No. 0-4776). Exhibit 10.3 Sturm, Ruger & Company, Inc. Supplemental Executive Profit Sharing Retirement Plan (Incorporated by reference to Exhibit 10.4 to the Company's Annual Report on Form 10-K for the year ended December 31, 1991, SEC File No. 0-4776). Exhibit 10.4 Agreement and Assignment of Lease dated September 30, 1987 by and between Emerson Electric Co. and Sturm, Ruger & Company, Inc. (Incorporated by reference to Exhibit 10.2 to the Company's Annual Report on Form 10-K for the year ended December 31, 1991, SEC File No. 0-4776). Exhibit 10.5 Sturm, Ruger & Company, Inc. Supplemental Executive Retirement Plan (Incorporated by reference to Exhibit 10.5 to the Company's Annual Report on Form 10-K for the year ended December 31, 1995, SEC File No. 0-4776). Exhibit 10.6 Operating Agreement of Antelope Hills, LLC, a Delaware Limited Liability Company, dated as of October 5, 1995 (Incorporated by reference to Exhibit 10.6 to the Company's Annual Report on Form 10-K for the year ended December 31, 1995, SEC File No. 0-4776). Exhibit 10.7 Sturm, Ruger & Company, Inc. 1998 Stock Incentive Plan. (Incorporated by reference to Exhibit 10.7 to the Company's Annual Report on Form 10-K for the year ended December 31, 1998, SEC File No. 0-4776). Exhibit 13.1 Annual Report to Stockholders of the Company for the year ended December 31, 2000. Except for those portions of such Annual Report to Stockholders expressly incorporated by reference into the Report, such Annual Report to Stockholders is furnished solely for the information of the Securities and Exchange Commission and shall not be deemed a "filed" document. Exhibit 23.1 Consent of Independent Auditors. Exhibit 99.1 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended March 31, 1987, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. </TABLE> 14
15 ITEM 14 -- EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K (CONTINUED) <TABLE> <S> <C> Exhibit 99.2 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended September 30, 1990, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.3 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended March 31, 1995, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.4 Item 1 LEGAL PROCEEDINGS from the Quarterly Reports on Form 10-Q of the Company for the quarters ended March 31, June 30, 1996, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.5 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended September 30, 1997, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.6 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended September 30, 1998, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.7 Item 3 LEGAL PROCEEDINGS from the Annual Report on Form 10-K of the Company for the year ended December 31, 1998, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.8 Item 1 LEGAL PROCEEDINGS from the Quarterly Reports on Form 10-Q of the Company for the quarters ended March 31, June 30, and September 30, 1999 SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.9 Item 3 LEGAL PROCEEDINGS from the Annual Report on Form 10-K of the Company for the year ended December 31, 1999, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.10 Item 1 LEGAL PROCEEDINGS from the Quarterly Reports on Form 10-Q of the Company for the quarters ended March 31, June 30, and September 30, 2000, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. </TABLE> (b) Report on Form 8-K filed in the fourth quarter of 2000: None 15
16 SIGNATURES Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized. STURM, RUGER & COMPANY, INC. ---------------------------- (Registrant) /S/LESLIE M. GASPER ---------------------------- Leslie M. Gasper Corporate Secretary March 16, 2001 ---------------------------- Date Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated. <TABLE> <S> <C> <C> <C> /S/WILLIAM B. RUGER 3/16/01 /S/WILLIAM B. RUGER, JR. 3/16/01 - ------------------------------------------------------ ---------------------------------------------------- Chairman Emeritus and Director Chairman of the Board, Chief Executive Officer and Director (Principal Executive Officer) /S/ERLE G. BLANCHARD 3/16/01 /S/STEPHEN L. SANETTI 3/16/01 - ------------------------------------------------------ ---------------------------------------------------- Erle G. Blanchard Stephen L. Sanetti Vice Chairman. President, Chief Operating Vice Chairman, Senior Executive Vice Officer, Treasurer and Director President, General Counsel and Director (Principal Financial Officer) /S/JOHN M. KINGSLEY, JR. 3/16/01 /S/STANLEY B. TERHUNE 3/16/01 - ------------------------------------------------------ ---------------------------------------------------- John M. Kingsley, Jr. Stanley B. Terhune Director Director /S/RICHARD T. CUNNIFF 3/16/01 /S/TOWNSEND HORNOR 3/16/01 - ------------------------------------------------------ ---------------------------------------------------- Richard T. Cunniff Townsend Hornor Director Director /S/PAUL X. KELLEY 3/16/01 /S/JAMES E. SERVICE 3/16/01 - ------------------------------------------------------ ---------------------------------------------------- Paul X. Kelley James E. Service Director Director </TABLE> 16
17 EXHIBIT INDEX <TABLE> <CAPTION> <S> <C> Exhibit 3.1 Certificate of Incorporation of the Company, as amended (Incorporated by reference to Exhibits 4.1 and 4.2 to the Form S-3 Registration Statement previously filed by the Company File No. 33-62702). Exhibit 3.2 Bylaws of the Company, as amended (Incorporated by reference to Exhibit 3.2 to the Company's Annual Report on Form 10-K for the year ended December 31, 1995, SEC File No. 0-4776). Exhibit 3.3 Amendment to Article 2, Sections 4 and 5 of the Bylaws of the Company (Incorporated by reference to Exhibit 3.3 to the Company's Annual Report on Form 10-K for the year ended December 31, 1996, SEC File No. 0-4776). Exhibit 10.1 Sturm, Ruger & Company, Inc. 1986 Stock Bonus Plan (Incorporated by reference to Exhibit 10.1 to the Company's Annual Report on Form 10-K for the year ended December 31, 1988, as amended by Form 8 filed March 27, 1990, SEC File No. 0-4776). Exhibit 10.2 Amendment to Sturm, Ruger & Company, Inc. 1986 Stock Bonus Plan (Incorporated by reference to Exhibit 10.3 to the Company's Annual Report on Form 10-K for the year ended December 31, 1991, SEC File No. 0-4776). Exhibit 10.3 Sturm, Ruger & Company, Inc. Supplemental Executive Profit Sharing Retirement Plan (Incorporated by reference to Exhibit 10.4 to the Company's Annual Report on Form 10-K for the year ended December 31, 1991, SEC File No. 0-4776). Exhibit 10.4 Agreement and Assignment of Lease dated September 30, 1987 by and between Emerson Electric Co. and Sturm, Ruger & Company, Inc. (Incorporated by reference to Exhibit 10.2 to the Company's Annual Report on Form 10-K for the year ended December 31, 1991, SEC File No. 0-4776). Exhibit 10.5 Sturm, Ruger & Company, Inc. Supplemental Executive Retirement Plan (Incorporated by reference to Exhibit 10.5 to the Company's Annual Report on Form 10-K for the year ended December 31, 1995, SEC File No. 0-4776). Exhibit 10.6 Operating Agreement of Antelope Hills, LLC, a Delaware Limited Liability Company, dated as of October 5, 1995 (Incorporated by reference to Exhibit 10.6 to the Company's Annual Report on Form 10-K for the year ended December 31, 1995, SEC File No. 0-4776). Exhibit 10.7 Sturm, Ruger & Company, Inc. 1998 Stock Incentive Plan. (Incorporated by reference to Exhibit 10.7 to the Company's Annual Report on Form 10-K for the year ended December 31, 1998, SEC File No. 0-4776). </TABLE> 17
18 EXHIBIT INDEX (continued) <TABLE> <CAPTION> <S> <C> Exhibit 13.1 Annual Report to Stockholders of the Company for the year ended December 31, 2000. Except for those portions of such Annual Report to Stockholders expressly incorporated by reference into the Report, such Annual Report to Stockholders is furnished solely for the information of the Securities and Exchange Commission and shall not be deemed a "filed" document. Exhibit 23.1 Consent of Independent Auditors. Exhibit 99.1 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended March 31, 1987, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.2 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended September 30, 1990, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.3 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended March 31, 1995, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.4 Item 1 LEGAL PROCEEDINGS from the Quarterly Reports on Form 10-Q of the Company for the quarters ended June 30, 1996, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.5 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter September 30, 1997, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.6 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended September 30, 1998, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.7 Item 3 LEGAL PROCEEDINGS from the Annual Report on Form 10-K of the Company for the year ended December 31, 1998, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. Exhibit 99.8 Item 1 LEGAL PROCEEDINGS from the Quarterly Reports on Form 10-Q of the Company for the quarters ended March 31, June 30, and September 30, 1999, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. </TABLE> 18
19 EXHIBIT INDEX (continued) <TABLE> <CAPTION> <S> <C> Exhibit 99.9 Item 3 LEGAL PROCEEDINGS from the Annual Report on Form 10-K of the Company for the year ended December 31, 1999, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDING. Exhibit 99.10 Item 1 LEGAL PROCEEDINGS from the Quarterly Reports on Form 10-Q of the Company for the quarters ended March 31, June 30, and September 30, 2000, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS. </TABLE> 19
20 ANNUAL REPORT ON FORM 10-K YEAR ENDED DECEMBER 31, 2000 STURM, RUGER & COMPANY, INC. AND SUBSIDIARIES SOUTHPORT, CONNECTICUT ITEMS 14(a)(2) AND 14(d) FINANCIAL STATEMENT SCHEDULE CERTAIN EXHIBITS 20
21 Sturm, Ruger & Company, Inc. and Subsidiaries Item 14(a)(2) and Item 14(d)--Financial Statement Schedule Schedule II -- Valuation and Qualifying Accounts (In Thousands) <TABLE> <CAPTION> - --------------------------------------------------------------------------------------------------------------------------- COL. A COL. B COL. C COL. D COL. E - --------------------------------------------------------------------------------------------------------------------------- ADDITIONS ------------------------- (1) (2) Charged to Balance at Charged to Other Balance Beginning Costs and Accounts at End Description of Period Expenses -Describe Deductions of Period - --------------------------------------------------------------------------------------------------------------------------- <S> <C> <C> <C> <C> <C> Deductions from asset accounts: Allowance for doubtful accounts: Year ended December 31, 2000 $1,392 $ (125) $ 15(a) $1,252 ------ ------ ---------- ------ Year ended December 31, 1999 $1,299 $ 125 $ 32(a) $1,392 ------ ------ ---------- ------ Year ended December 31, 1998 $1,001 $ 350 $ 52(a) $1,299 ------ ------ ---------- ------ Allowance for discounts: Year ended December 31, 2000 $1,749 $6,696 $ 7,315(b) $1,130 ------ ------ ---------- ------ Year ended December 31, 1999 $1,888 $5,634 $ 5,773(b) $1,749 ------ ------ ---------- ------ Year ended December 31, 1998 $2,842 $9,948 $10,902(b) $1,888 ------ ------ ---------- ------ Product safety modifications accrual: Year ended December 31, 2000 $ 598 $ 112(c) $ 486 ------ ---------- ------- Year ended December 31, 1999 $ 752 $ 154(c) $ 598 ------ ---------- ------- Year ended December 31, 1998 $ 870 $ 118(c) $ 752 ------ ---------- ------- </TABLE> (a) Accounts written off (b) Discounts taken (c) Costs incurred 21